Although there are constant improvements in wave energy converter (WEC) technology, it is crucial to investigate site-specific sea conditions for optimal power absorption and efficiency. This study compares the efficiency of a floating buoy-type WEC device, with three differently shaped floats: a semi-sphere, a cylinder considered suitable for a location near Ensenada, on the Baja California peninsula, and a novel, rounded, semi-rectangular float. A statistical analysis of the wave climate of the last 42 years was performed to define the conditions to which the device is subjected. The WEC location was chosen for shallow waters, using a computational model that solves the modified mild slope equation. The hydrodynamic response of the three float designs was then analyzed in the frequency and time domains, using the software ANSYS AQWA 19.2, to assess the dynamics of the floating body, the forces exerted, and the power absorbed, as well as the suitability of the proposed power take-off (PTO) system. The findings show that the proposed float design absorbs the most energy, with an annual power of 135.11 MW, and that the PTO mechanism is appropriate.
The wave energy converter (WEC) technology constantly develops new designs and models. To encourage its development within the energy sector, research is required to improve current designs and create durable and effective devices. However, it is also crucial to investigate the suitability of a WEC to a site-specific sea condition as this can impact its optimal power absorption and constructability. This study evaluates and compares the efficiency of a heaving buoy with varied geometries in one of the most energetic places along the Mexican coast. A statistical analysis of the wave climate on the coast of Ensenada during the last 42 years is performed to define the conditions to which the device is subjected. The location of the WEC in shallow waters is chosen using a computational model which solves the modified mild slope equation in its elliptic shape. The heaving buoy floater is studied using three distinct geometries: a semi-sphere, a cylinder, and a proposed rounded semi-rectangle. The hydrodynamic response of the three geometries is then analysed in the frequency and time domain using ANSYS AQWA. The hydrodynamic study involves the assessment of the floating body dynamics, exerted forces, the power absorbed as well as the suitability of the proposed power take-off (PTO) system. Findings reveal that the proposed geometry absorbs the most energy, with an annual power of 135.11 MW, and that the transmission PTO design is appropriate for this type of technology.