The laser polishing technique offers an adaptable, accurate, and environmentally friendly solution to enhance the surface quality of additive manufactured metallic components. Recent work has shown that the surface roughness of laser additive manufactured metallic alloys can be significantly reduced via the laser polishing method. This paper examines the mechanical performances of a laser polished surface fabricated by selective laser melting (SLM). Compared with the original SLM surface, systematic measurements revealed that the surface roughness of the laser polished surface can be effectively reduced from 6.53 μm to 0.32 μm, while the microhardness and wear resistance increased by 25% and 39%, respectively. Through a thermal history analysis of the laser polishing process using the finite element model, new martensitic phase formation in the laser polished layer is carefully explained, which reveals significant effects on residual stress, strength, and fatigue. These findings establish foundational data to predict the mechanical performance of laser polished metallic components fabricated by additive manufacturing methods, and pave the way for functional surface design with practical application via the laser process.
The effect of laser irradiation on surface wettability of cyclic olefin polymer (COP) was investigated. Under different laser parameters, a superhydrophilic or a superhydrophobic COP surface with a water contact angle (WCA) of almost 0° or 163°, respectively, could be achieved by direct femtosecond laser irradiation. The laser power deposition rate (PDR) was found to be a key factor on the wettability of the laser-treated COP surface. The surface roughness and surface chemistry of the laser-irradiated samples were characterized by surface profilometer and X-ray photoelectron spectroscopy, respectively; they were found to be responsible for the changes of the laser-induced surface wettability. The mechanisms involved in the laser surface wettability modification process were discussed.