Lu Tang

Dr. Lu Tang

orcid

Research Focus & Metrics

Academic Career Length

17Years (2010-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
21 January 2020 in Electronics
Verified
Journal Article
Open access
PDF file
CZChangchun Zhang
Changchun Zhang
LSLong Shang
Long Shang
YWYongkai Wang
Yongkai Wang
LTLu Tang
Lu Tang
This paper presents a low-pass filter (LPF) for an ultra-high frequency (UHF) radio frequency identification (RFID) reader transmitter in standard SMIC 0.18 μm CMOS technology. The active-RC topology and Butterworth approximation function are employed mainly for high linearity and high flatness respectively. Two cascaded fully-differential Tow-Thomas biquads are chosen for low sensitivity to process errors and strong resistance to the imperfection of the involved two-stage fully-differential operational amplifiers. Besides, the LPF is programmable in order to adapt to the multiple data rate standards. Measurement results show that the LPF has the programmable bandwidths of 605/870/1020/1330/1530/2150 kHz, the optimum input 1dB compression point of −7.81 dBm, and the attenuation of 50 dB at 10 times cutoff frequency, with the overall power consumption of 12.6 mW from a single supply voltage of 1.8 V. The silicon area of the LPF core is 0.17 mm2.

29 August 2024 in IEEE Transactions on Circuits and Systems I: Regular Papers
Verified
Journal Article
Closed access
KWKai Wang
Kai Wang
FZFeiyang Zhong
Feiyang Zhong
JSJian Song
Jian Song
ZYZichuan Yu
Zichuan Yu
LTLu Tang
Lu Tang
QYQing Yao
Qing Yao
The methods based on Discrete Fourier Transform (DFT) are the mainstream approaches for frequency estimation of signals in power systems. However, they exhibit unfavorable long response times when confronted with signals experiencing abrupt transients, such as amplitude or phase step changes. To surmount this challenge, a novel methodology leveraging the DFT has been designed to estimate power system signals with accuracy and responsiveness under abrupt transient conditions. The method first constructs the correlation between DFT bins and each parameter. The relationship is then harnessed to derive an unbiased estimator for sine-wave with a known step position. Afterward, we introduce a step position estimation procedure that guarantees the robustness of the estimator when dealing with abrupt transients. As a result, the proposed method achieves zero response time when confronted with arbitrary abrupt transients without loss of accuracy. The effectiveness and responsiveness of our method are evaluated through simulations that adhere to the stringent requirements of P-class phasor measurement units.

22 September 2025 in IEEE Internet of Things Journal
Verified
Journal Article
Closed access
ZYZichuan Yu
Zichuan Yu
HGHongyu Ge
Hongyu Ge
XTXusheng Tang
Xusheng Tang
LTLu Tang
Lu Tang
Radio frequency fingerprint identification (RFFI) is a crucial method for physical (PHY)-layer security authentication of long-range radio (LoRa) devices. Due to its utilization of inherent hardware imperfections in devices, it possesses a tamper-resistant nature and is widely employed to enhance communication security. Nevertheless, a key feature used in RFFI—the carrier frequency offset (CFO)—is subject to drift over time and with temperature variations, significantly degrading identification accuracy. This article first conducts a series of experiments demonstrating the instability of CFO when used as the sole feature for RFFI. We then propose a frequency offset decoupling mechanism to mitigate this issue. Furthermore, a dedicated RFFI framework for LoRa is introduced, which includes an efficient signal preprocessing algorithm called STFT paired WVD transform (SPWT), a feature extractor based on a deep residual shrinkage network (DRSN), and a robustness enhancement module incorporating triplet loss and voting mechanisms. To validate the framework, a CFO dataset is constructed using 20 Semtech SX1276 modules. Experimental results demonstrate that the proposed method achieves an accuracy of 90.5% in handling frequency offset drift, significantly outperforming conventional approaches. Furthermore, its deployment on the RK3588 platform validates the practical applicability of the method.

13 October 2021 in Electronics
Verified
Journal Article
Open access
PDF file
LTLu Tang
Lu Tang
KCKuidong Chen
Kuidong Chen
YZYouming Zhang
Youming Zhang
XTXusheng Tang
Xusheng Tang
CZChangchun Zhang
Changchun Zhang
A high-speed programmable frequency divider for a Ka-band phase-locked loop (PLL)-type frequency synthesizer system is presented and fabricated in 90 nm CMOS technology. It consists mainly of a divided-by-8/9 dual-modulus prescaler (DMP) and pulse swallow counters. An active-inductor-based source-coupled logic (SCL) D flip-flop (DFF) and the “OR” gate are used in the DMP in order to promote its locking range and operation frequency. The measured operation frequency range of the improved programmable frequency divider covers from 6 to 20 GHz with a low phase noise of less than −136 dBc/Hz at a 1 MHz offset of output signals, an optimum sensitivity of −27 dBm at 15 GHz, and a low power consumption of 9.1 mW.

10 March 2025 in IEEE Sensors Journal
Verified
Journal Article
Closed access
LTLu Tang
Lu Tang
BWBin Wei
Bin Wei
KWKai Wang
Kai Wang
ZHZhenhao Hu
Zhenhao Hu
XTXusheng Tang
Xusheng Tang
ZWZeyu Wu
Zeyu Wu
Micro-electro-mechanical system (MEMS) oscillators are widely used in navigation systems because of their reliability. Real-time temperature changes will have a major impact on the stability of these systems, so calculating the output frequency of the MEMS resonator at different temperatures is particularly important for the stability of the system. Therefore, we propose a three-point interpolated discrete Fourier transform (IpDFT) based frequency estimation algorithm for a temperature-stable system in MEMS oscillators. Because the temperature-stable technique can provide an unbiased estimate of the frequency of the signal that is more accurate and efficient for temperature compensation, it can effectively mitigate the frequency shift of the MEMS resonator due to temperature variation. The simulated result of the absolute temperature error is less than 0.01 °C when the signal-to-noise ratio (SNR) is 40 dB. The absolute temperature error result is less than 0.01 °C in the amplitude jitter and frequency jitter tests. The temperature stable technique is applied to the MEMS resonator temperature compensation system. The measured frequency shift ratio of the signal processed by the temperature compensation system is less than 30 ppm, indicating that the oscillation frequency can be effectively stabilized at different temperatures.

10 January 2024 in Scientific Reports
Verified
Journal Article
Open access
PDF file
LTLu Tang
Lu Tang
ZYZichuan Yu
Zichuan Yu
YLYujia Lu
Yujia Lu
ZJZhiqi Jin
Zhiqi Jin
SXSicong Xia
Sicong Xia
XTXusheng Tang
Xusheng Tang
An optimized millimeter-wave digital controlled oscillator (DCO) in a 40-nm CMOS process is presented in this work. The coarse-tuning modules and medium-tuning modules of the DCO utilize modified binary-weighted digitally controlled transmission lines (DCTLs) to achieve a better compromise among smaller chip size, higher resonant frequency, better tuning resolution and lower phase noise. The tuning precision and die size of the medium tuning bank are improved without changing the binary coding rules by replacing the lowest-weight bit of the DCTLs with switched capacitors. In comparison with traditional DCTLs, the control bits of the coarse and medium tuning modules have been changed from 30 to 8, resulting in a 34.4% reduction in overall length (from 122 $$\upmu$$ μ m to 80 $$\upmu$$ μ m). In addition, the DCO’s fine-tuning modules are achieved using a binary-weighted switched capacitors array connected to the secondary winding of a low-coupling transformer, which enhances the DCO’s fine-tuning bank for better frequency resolution with less circuit complexity. The measured tuning range of the optimized DCO is 76-81GHz with a smaller die size of 0.12mm $$^2$$ 2 . This results in an outstanding figure of merit ( $$FoM_A$$ F o M A ) of − 190.52dBc/Hz.