The boundary layer structure is crucial to the formation and intensification of typhoons, but there is still a lack of high-precision turbulence observations in the typhoon boundary layer due to limitations of the observing instruments under typhoon conditions. Using joint observations from multiple ground-based Doppler wind lidars (DWL) collected by the Shanghai Typhoon Institute of China Meteorological Administration (CMA) during the transit of Typhoon Lekima (8–11 August 2019), the characteristics of the wind field and physical quantities (including turbulent kinetic energy (TKE) and typhoon boundary layer height (TBLH)) of the boundary layer of typhoon Lekima were analyzed. The magnitude of TKE was shown to be related not only to the horizontal wind speed but also to the presence of a strong downdraft, which leads to a rapid increase of TKE. The magnitudes of TKE in different quadrants of Typhoon Lekima were also found to differ. The TKE in the front right quadrant of the typhoon was 2.5–6.0 times that in the rear left quadrant and ~1.7 times that in the rear right quadrant. The TKE over the island was larger than that over the urban area. Before Typhoon Lekima made landfall, the TKE increased with decreasing distance to the typhoon center. After typhoon landfall, the TKE changes were different on the left and right sides of the typhoon center, with the TKE on the left decreasing rapidly, while that on the right changed little. The typhoon boundary layer height calculated by five methods was compared and was found to decrease gradually before typhoon landfall and increased gradually afterward. The trends of the TBLH calculated using helicity and TKE were consistent, and both determine the TBLH well, while the maximum tangential wind speed height (humax) was larger than the height calculated by other methods. This study confirms that DWL has a strong detecting capability for the finescale structure of the typhoon boundary layer and provides a powerful tool for the validation of numerical simulations of typhoon structure.
We used the observations from Atmospheric Infrared Sounder (AIRS) onboard Aqua over the northwest Pacific Ocean from 2006–2015 to study the relationships between (i) tropical cyclone (TC) temperature structure and intensity and (ii) cloud macro-/micro-physical properties and TC intensity. TC intensity had a positive correlation with warm-core strength (correlation coefficient of 0.8556). The warm-core strength increased gradually from 1 K for tropical depression (TD) to >15 K for super typhoon (Super TY). The vertical areas affected by the warm core expanded as TC intensity increased. The positive correlation between TC intensity and warm-core height was slightly weaker. The warm-core heights for TD, tropical storm (TS), and severe tropical storm (STS) were concentrated between 300 and 500 hPa, while those for typhoon (TY), severe typhoon (STY), and Super TY varied from 200 to 350 hPa. Analyses of the cloud macro-/micro-physical properties showed that the top of TC cloud systems mainly consisted of ice clouds. For TCs of all intensities, areas near the TC center showed lower cloud-top pressures and lower cloud-top temperatures, more cloud fractions, and larger ice-cloud effective diameters. With the increase in TC intensity, the levels of ice clouds around the TC center became higher and the spiral cloud-rain bands became larger. When a TC developed into a TY, STY, or Super TY, the convection in the clouds was stronger, releasing more heat, thus forming a much warmer warm core.