The boundary layer structure is crucial to the formation and intensification of typhoons, but there is still a lack of high-precision turbulence observations in the typhoon boundary layer due to limitations of the observing instruments under typhoon conditions. Using joint observations from multiple ground-based Doppler wind lidars (DWL) collected by the Shanghai Typhoon Institute of China Meteorological Administration (CMA) during the transit of Typhoon Lekima (8–11 August 2019), the characteristics of the wind field and physical quantities (including turbulent kinetic energy (TKE) and typhoon boundary layer height (TBLH)) of the boundary layer of typhoon Lekima were analyzed. The magnitude of TKE was shown to be related not only to the horizontal wind speed but also to the presence of a strong downdraft, which leads to a rapid increase of TKE. The magnitudes of TKE in different quadrants of Typhoon Lekima were also found to differ. The TKE in the front right quadrant of the typhoon was 2.5–6.0 times that in the rear left quadrant and ~1.7 times that in the rear right quadrant. The TKE over the island was larger than that over the urban area. Before Typhoon Lekima made landfall, the TKE increased with decreasing distance to the typhoon center. After typhoon landfall, the TKE changes were different on the left and right sides of the typhoon center, with the TKE on the left decreasing rapidly, while that on the right changed little. The typhoon boundary layer height calculated by five methods was compared and was found to decrease gradually before typhoon landfall and increased gradually afterward. The trends of the TBLH calculated using helicity and TKE were consistent, and both determine the TBLH well, while the maximum tangential wind speed height (humax) was larger than the height calculated by other methods. This study confirms that DWL has a strong detecting capability for the finescale structure of the typhoon boundary layer and provides a powerful tool for the validation of numerical simulations of typhoon structure.
Fengyun4A is the first geostationary satellite with payload of the infrared hyperspectral sounder. The geostationary platform-based instrument can provide observational 3-dimensional fields of temperature and humidity with high scanning frequencies and spatial resolutions. The IR instrument-observed temperature (T) and relative humidity (RH) profiles are closely related to the cloud states. Radiosonde observations are used to validate the Fengyun4A T and RH profiles under different cloud-type sky conditions. The cloud-type information comes from the Himawari-8 satellite which has substantial observing overlap with Fengyun4A over Asia. Taking the radiosonde observation as the reference, Fengyun4A T profile has uncertainty of 2.1 K under clear sky, and 3.7 K under cloudy sky. When cloudy sky is divided into cloud-type skies, the categories have disparities in temperature biases, varying from positive to negative. It is found that most of cloud-type categories have uncertainties of 2.5–3.0 K. The RH profiles have an uncertainty of 18% under clear sky and 21% under cloudy sky in absolute value. On average, the RH biases show neural but positively biased at the dry side and negatively biased at the wet side in the scatter plot. The International Satellite Cloud Climatology Project (ISCCP) cloud type can help to extend the quality flag of the Fengyun4A temperature profile. The impacts from cloud types on IR sounding profiles should be considered in product development or applications.