Shiping Fan

Dr. Shiping Fan


Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 September 2018 in Journal of Materials in Civil Engineering
Verified
Journal Article
Closed access
SFShiping Fan
Shiping Fan
Hao WangHao Wang
Hao Wang
HZHongzhou Zhu
Hongzhou Zhu
WSWei Sun
Wei Sun
This study aims to evaluate fracture resistance and self-healing performance of asphalt concrete at low temperatures using a semicircular bending (SCB) test. Three asphalt mixtures with different types of asphalt binder were used. The applied load and crack opening tip displacement (CTOD) were measured to calculate fracture energy and the critical release rate of fracture energy (J -integral). The self-healing indexes (HIs ) were defined as the ratios of fracture energy, peak load, and J -integral obtained before and after healing, respectively. The self-healing performance of asphalt mixture was investigated considering different healing temperatures, healing time, and initial crack lengths (notch depths). The results showed that the styrene-butadiene-styrene (SBS) modified asphalt mixture possessed the highest fracture resistance, as compared to the asphalt mixture modified by rubber compound and the asphalt mixture with conventional 70# asphalt binder. The self-healing ability of the asphalt mixture increased with the increase of healing temperature and healing time; while it decreased with the increase of notch length. The optimum healing temperature was determined to be 60°C at the same healing time of 8 h, whereas the optimum healing time was found to be complicated depending on mixture type. Each asphalt mixture exhibited different healing abilities, depending on healing temperature, healing time, and the performance indicator of healing index.

1 July 2022 in Journal of Materials in Civil Engineering
Verified
Journal Article
Closed access
PDF file
SFShiping Fan
Shiping Fan
HZHongzhou Zhu
Hongzhou Zhu
ZLZhangtian Lu
Zhangtian Lu
This study aims to investigate the fatigue behavior and healing properties of aged asphalt binders. Both 70# and SBS-modified asphalt binders were aged using a rolling thin-film oven test (RTFOT), and their physical properties were analyzed. Their fatigue behavior and healing properties were investigated using a dynamic-shear-rheometer time-sweep test. The influence of healing on fatigue behavior was evaluated in terms of the fatigue life ratio (FLR), and a new index was defined (accumulated dissipation-energy ratio, ADER) to evaluate the healing properties of aged asphalt binders. Aging reduced the penetration and ductility of both the asphalt binders, and large aging degrees increased their softening points. Small aging degrees slightly decreased the softening point of the SBS-modified asphalt binder but increased that of 70# asphalt binder. The former had a better thermal-oxidative aging resistance than the latter. Aging increased the complex shear modulus of the binders, resulting in a longer fatigue life under controlled-stress conditions. The fatigue life of aging asphalt binders obeyed a good (R2>0.90 ) double-logarithmic linear relationship with the stress level. Healing recovers the asphalt complex shear modulus and extends its fatigue life. Additionally, the FLR and ADER increased with a decrease in aging degree and an increase in the healing period.

17 June 2025 in Innovative Infrastructure Solutions
Verified
Journal Article
Closed access
PDF file
SFShiping Fan
Shiping Fan
WZWenli Zhang
Wenli Zhang
XGXinli Gan
Xinli Gan

8 October 2026 in Coatings
Verified
Journal Article
Open access
PDF file
XGXinli Gan
Xinli Gan
SFShiping Fan
Shiping Fan
MDMei Deng
Mei Deng
JWJing Wang
Jing Wang
Colored pavements are widely applied to improve road aesthetics and driving safety. Nevertheless, conventional colored pavement technologies suffer from limitations in cost, environmental performance, durability, and skid resistance, and cannot satisfy the demand for bright color and high skid resistance of mountainous roads. This study develops a relatively eco-friendly, durable waterborne colored anti-skidding seal coat with high skid resistance. The optimal pigment dosage of the binder was determined based on color characteristics, tensile strength, and elongation at break. The type and particle size of colored fine aggregates were selected by evaluating particle roundness, interfacial adhesion, skid resistance, and abrasion performance. The binder spreading rate and aggregate spreading rate were further optimized according to adhesion strength, and the skid resistance and water permeability of the seal coat were verified. The results show that the binder with 5% pigment dosage achieves the closest color to the standard value with minimum color difference, and maintains well-preserved mechanical properties. Colored ceramic particles with high roundness and adhesion are the preferred aggregate. The mixed aggregate combining 1 mm and 2 mm particles at a ratio of 3:2 balances skid resistance and abrasion resistance. The optimal binder spreading rate is 1.2 kg/m2, corresponding to the best adhesion and skid resistance. The prepared waterborne colored anti-skidding seal coat presents excellent skid resistance and waterproof performance, favorable water resistance, and certain oil contamination resistance. Short-term gasoline contamination will reduce skid resistance, while its color shows only minor drift under long-term petroleum contaminant erosion.