Andrés César

Mr. Andrés César

Universidad de Concepción, Chile
orcid

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 December 2020 in Sustainability
Verified
Journal Article
Open access
PDF file
CMClaudia Mansilla
Claudia Mansilla
Mauricio PradenaMauricio Pradena
Mauricio Pradena
CFCecilia Fuentealba
Cecilia Fuentealba
ACAndrés César
Andrés César
Concrete is a material with high compressive strength, but predisposed to shrinkage cracking, rapid cracks propagation, and brittle failures. The incorporation of fibre is an acceptable solution to reduce these limitations. However, high cost and energy consumption related to man-made fibres have placed natural fibres as an attractive sustainable alternative, especially considering that different natural fibres are industrial waste (as the Eucalyptus globulus bark fibre). Still, natural fibres can produce an important reduction of concrete strength. Hence, the objective of this study is to evaluate the effects of Eucalyptus globulus bark fibre in traditional concrete mechanical properties as compressive and flexural strength. For this, an experimental program was developed in such a way that reduces the results uncertainties and increases the power of decision regarding the percentage and fibre conditions of the samples. The results indicate that, unlike other natural fibres, the traditional mechanical properties have a slight reduction and acceptable workability. This fact is more evident in the samples with 0.50% fibre with respect to the weight of cement. Therefore, reinforcing mortars and concrete with Eucalyptus globulus bark fibres emerges as an eco-friendly building alternative to reuse this industrial waste.

3 November 2020 in Sustainability
Verified
Journal Article
Open access
PDF file
ACAndrés César
Andrés César
Mauricio PradenaMauricio Pradena
Mauricio Pradena
Concrete pavements are characterized by their high durability and low conservation costs. However, concrete production causes large amounts of harmful emissions. In this context, short slab pavements allow us to reduce the slab thickness and the amount of concrete used in their construction. These benefits are only valid if the design assumptions are fulfilled, one of which is the provision of enough Load Transfer Efficiency (LTE) by the aggregate interlock. However, the current design method for short slabs does not relate the LTE with the Crack Width (CW) under the joints. This can jeopardize the sustainable benefits of short slabs. The objective of this study is to propose a method to develop the LTE–CW relationship for the short slabs’ design. The sustainable and accessible approach adopted in the proposal represents a paradigm shift compared to the traditional methods, which are limited to laboratories with sufficient resources to perform real-scale testing. The results show that it is possible to develop the LTE–CW relation in a sustainable manner. Furthermore, the aggregates that fulfill the technical specifications for pavements provide enough LTE when most of the joints are activated. When that happens, short slab pavements reduce environmental and human health impacts by 33% and 26%, respectively.

15 September 2024 in Forests
Verified
Journal Article
Open access
PDF file
CFCecilia Fuentealba
Cecilia Fuentealba
CSCesar Segovia
Cesar Segovia
Mauricio PradenaMauricio Pradena
Mauricio Pradena
ACAndrés César
Andrés César
Traditional thermal insulation panels consume large amounts of energy during production and emits pollutants into the environment. To mitigate this impact, the development of bio-based materials is an attractive alternative. In this context, the characteristics of the Eucalyptus fiber bark (EGFB) make it a candidate for insulation applications. However, more knowledge about the manufacturing process and in-service performance is needed. The present study characterized the properties that determine the in-service behavior of the EGFB insulation panel. The assessment involved two different manufacturing processes. The results indicated that the hot plates and the saturated steam injection manufacturing system can produce panels with similar target and bulk density. The thermal conductivity fluctuated between 0.064 and 0.077 W/m·K, which indicated good insulation, and the values obtained for thermal diffusivity (0.10–0.37 m mm2/s) and water vapor permeability (0.032–0.055 m kg/GN s) are comparable with other commercially available panels. To guarantee a good in-service performance, the panels need to be treated with flame retardant and antifungal additive. The good performance of the panel is relevant because bio-based Eucalyptus bark panels generate less CO2 eq and require less energy consumption compared to traditional alternatives, contributing to the sustainability of the forestry and the construction industry.

17 March 2020 in The Baltic Journal of Road and Bridge Engineering
Verified
Journal Article
Open access
PDF file
Mauricio PradenaMauricio Pradena
Mauricio Pradena
LHLambert Houben
Lambert Houben
ACAndrés César
Andrés César
Aggregate interlock is the dominant load transfer mechanism in non-dowelled Jointed Plain Concrete Pavements, as the innovative short concrete slabs. Although the Load Transfer Efficiency of this pavement innovation is based on that mechanism, the structural design methods do not relate the Load Transfer Efficiency by aggregate interlock with its direct cause, which is the Crack Width under the joints. The objective of the present article is to characterise in the laboratory the Load Transfer Efficiency−Crack Width relation for innovative short slabs Jointed Plain Concrete Pavements. Additionally, as an alternative to large-scale laboratory tests to study the Load Transfer Efficiency, a practical test on a reduced scale is proposed. The results confirmed that short slabs Jointed Plain Concrete Pavements with high-quality aggregates are able to provide adequate Load Transfer Efficiency (above 70%) without dowels bars. Based on the laboratory results, complemented with previous field data, a Load Transfer Efficiency−Crack Width curve is proposed and made available for structural design methods of short slabs Jointed Plain Concrete Pavements. Finally, the laboratory test on a reduced scale is useful to develop specific Load Transfer Efficiency−Crack Width relations using standard equipment available in traditional concrete laboratories.

1 February 2024 in Proceedings of the Institution of Civil Engineers - Engineering Sustainability
Verified
Journal Article
Closed access
EGEduardo García
Eduardo García
Mauricio PradenaMauricio Pradena
Mauricio Pradena
ASAlex O. Schwarz
Alex O. Schwarz
ACAndrés César
Andrés César
Bruno F UrbanoBruno F Urbano
Bruno F Urbano
Carlos andres MedinaCarlos andres Medina
Carlos andres Medina
Alternatives for using end-of-life tyres as a component of concrete are currently being studied. Particularly, granulated rubber and steel fibres from tyres can generate relevant technical benefits in concrete. However, it is not clear what environmental benefits these alternatives can provide. Hence, a study was carried out to evaluate, from an environmental perspective, applications of concrete with recycled materials from tyres. For this purpose, a streamlined life-cycle assessment was developed to compare the impact of the use of concrete with tyre materials and traditional concrete for safety barriers, railway sleepers, pavements and masonry mortar. Furthermore, the analysis was based on energy-thermal simulations, experimental work and collected studies. The results indicated that a safety barrier and a railway sleeper with tyres can reduce the harmful impact by 60 and 50%, respectively. For masonry mortar and concrete pavement applications, the impact reduction was between 4 and 10%. Moreover, one case was observed where, to comply with the technical requirements, it was necessary to incorporate more material into the concrete mix. This had a significant impact on the results, which meant that no environmental benefits were generated. Therefore, the study showed that to ensure the benefits of an application, it was required to consider not only the technical advantages but also the environmental savings that contributed to sustainable construction.

13 August 2024 in Preprints.org
Verified
Preprint
Open access
PDF file
CFCecilia Fuentealba
Cecilia Fuentealba
CSCesar Segovia
Cesar Segovia
Mauricio PradenaMauricio Pradena
Mauricio Pradena
ACAndrés César
Andrés César
Traditional thermal insulation panels consume large amounts of energy during production and emits pollutants into the environment. To mitigate this impact, the development of bio-based materials is an attractive alternative. In this context, the characteristics of the Eucalyptus fiber bark (EGFB) make it a candidate for insulation applications. However, more knowledge about the manufacturing process and in-service performance is needed. The present study characterized the properties that determinate the in-service behaviour of the EGFB insulation panel. The assessment involved two different manufacturing process. The results indicated that the hot plates and the saturated steam injection manufacturing system can produce panels with similar theoretical and bulk density. The thermal conductivity fluctuated between 0.064 and 0.077 W/m.K, which indicated good insulation. Furthermore, the values obtained for thermal diffusivity and water vapor transmission properties are comparable with other commercially available panels. To guarantee a good in-service performance, the panels need to be treated with flame retardant and antifungal additive. The good performance of the panel is relevant because bio-based Eucalyptus bark panels generate less CO2 eq and require less energy consumption compared to traditional alternatives, contributing to the sustainability of the forestry and the construction industry.