In modern electric equipment, especially electric vehicles, inverter control systems can lead to complex shaft voltages and bearing currents. Within an electric motor, many parts have electrical failure problems, and among which bearings are the most sensitive and vulnerable components. In recent years, electrical failures in bearing have been frequently reported in electric vehicles, and the electrical failure of bearings has become a key issue that restricts the lifetime of all-electric motor-based power systems in a broader sense. The purpose of this review is to provide a comprehensive overview of the bearing premature failure in the mechanical systems exposed in an electrical environment represented by electric vehicles. The electrical environments in which bearing works including the different components and the origins of the shaft voltages and bearing currents, as well as the typical modes of electrical bearing failure including various topographical damages and lubrication failures, have been discussed. The fundamental influence mechanisms of voltage/current on the friction/lubrication properties have been summarized and analyzed, and corresponding countermeasures have been proposed. Finally, a brief introduction to the key technical flaws in the current researches will be made and the future outlook of frontier directions will be discussed.

Self-lubricating polymer composite coatings, with tailorable tribological and mechanical properties, have been widely employed on mechanical parts to reduce friction and wear, which saves energy and improves the overall performance for applications such as aerospace satellite parts, shafts, gears, and bushings. The addition of functional fillers can overcome the limitations of single-polymer coatings and extend the service life of the coatings by providing a combination of low friction, high wear resistance, high load bearing, high temperature resistance, and high adhesion. This paper compares the heat resistance, and the tribological and mechanical properties of common polymer matrices, as well as the categories of functional fillers that improve the coating performance. Applicable scopes, process parameters, advantages, and limitations of the preparation methods of polymer coatings are discussed in detail. The tribological properties of the composite coatings with different matrices and fillers are compared, and the lubrication mechanisms are analyzed. Fillers reduce friction by promoting the formation of transfer films or liquid shear films. Improvement of the mechanical properties of the composite coatings with fillers of different morphologies is described in terms of strengthening and toughening mechanisms, including a stress transfer mechanism, shear yielding, crack bridging, and interfacial debonding. The test and enhancement methods for the adhesion properties between the coating and substrate are discussed. The coating adhesion can be enhanced through mechanical treatment, chemical treatment, and energy treatment of the substrate. Finally, we propose the design strategies for high-performance polymer composite coating systems adapted to specific operating conditions, and the limitations of current polymer composite coating research are identified.

In recent years, a new 2D-layered material—black phosphorus (BP)—has been a rising star after the era of graphene owing to its high charge carrier mobility, tunable direct bandgap and unique in-plane anisotropic structure. With the development of the synthesis and modification methods of BP, its extensive applications, e.g., transistors, batteries and optoelectronics have emerged. In order to explore its full potential, research into the tribological properties of BP 2D-layered materials such as lubrication additives and fillers in self-lubricating composite materials would be not only of high scientific value but also of practical significance. In this work, recent advances on the friction and lubrication properties of BP nanosheets made by our group, including the micro-friction properties, the lubrication properties of BP nanosheets as water-based and oil-based lubrication additives, and the friction and wear of BP/PVDF composites will be presented. Finally, the future challenges and opportunities in the use of BP materials as lubricants will be discussed.

In recent years, attempts to improve the mechanical properties of composites have increased remarkably owing to the inadequate utilization of matrices in demanding technological systems where efficiency, durability, and environmental compatibility are the key requirements. The search for novel materials that can potentially have enhanced mechanical properties continues. Recent studies have demonstrated that two-dimensional (2D) nanomaterials can act as excellent reinforcements because they possess high modulus of elasticity, high strength, and ultralow friction. By incorporating 2D nanomaterials in a composite, 2D nanomaterial-based composites (2DNBCs) have been developed. In view of this, a critical review of recent mechanical and tribological studies based on 2DNBCs has been undertaken. Matrices such as polymers, ceramics, and metals, as well as most of the representative 2D nanomaterial reinforcements such as graphene, boron nitride (BN), molybdenum disulfide (MoS2), and transition metal carbides and nitrides (MXenes) have been included in this review. Their preparation strategies, intrinsic mechanical properties, friction and lubrication performances, strengthening mechanisms, influencing factors, and potential applications have been comprehensively discussed. A brief summary and prospects are given in the final part, which would be useful in designing and fabricating advanced 2D nanocomposites in the future.