The solar-to-electric conversion efficiency of mesoscopic solar cells is highly dependent on electron extraction under solar irradiation and determines the charge recombination processes within devices. Boosting charge transfer via building energy level alignment has been proved to be a promising method to enhance the output power of solar cells. In the current work, we present the successful fabrication of functional biomass-converted carbon quantum dots with graded energy levels by doping nitrogen or sulphur atoms from lotus root powder. When employed as light absorbers for mesoscopic solar cells, light harvesting and electron extraction can be markedly increased arising from the band alignment of graded carbon quantum dots, yielding maximal power conversion efficiencies of 0.158% and 0.208% for bi- and tri-cascaded photovoltaics, respectively. The primary results demonstrate that the employment of an energy-graded architecture is a promising strategy to optimize the device output. Following this line of thought, we further fabricate a co-sensitized device by integrating graded carbon quantum dots with N719 dyes to enhance the electron extraction capability. The final device yields an efficiency as high as 9.04%, showing the potential application of carbon quantum dots in high-performance solar cells.

CsPbX₃(X = Cl⁻, Br⁻, I⁻) halide perovskites are investigated focusing on their triboelectric charging behaviors. A modified series containing inorganic perovskites is established with the order of CsPbBr₃, CsPbI₂Br, and CsPbCl₃ from negative to positive.

Electrowetting display (EWD) performance is severely affected by ink distribution and charge trapping in pixel cells. Therefore, a multi structural driving waveform is proposed for improving the aperture ratio of EWDs. In this paper, the hysteresis characteristic (capacitance–voltage, C-V) curve of the EWD pixel is tested and analyzed for obtaining the driving voltage value at the inflection point of the driving waveform. In the composition of driving waveform, a voltage slope is designed for preventing ink dispersion and a reverse pulse is designed for releasing the trapped charge which is caused by hysteresis characteristic. Finally, the frequency and the duty cycle of the driving waveform are optimized for the max aperture ratio by a series of testing. The experimental results show that the proposed driving waveform can improve the ink dispersion behavior, and the aperture ratio of the EWD is about 8% higher than the conventional driving waveform. At the same time, the response speed of the driving waveform can satisfy the dynamic display in EWDs, which provides a new idea for the design of the EWD driving scheme.

A hydrothermal method for synthesizing ultralong and thin copper nanowires (CuNWs) with average diameter of 35 nm and average length of 100 μm is demo

Three-color electrophoretic displays (EPDs) have the advantages of multi-color display and low power consumption. However, their red particles have the disadvantage of long response time. In this paper, a driving waveform, which is based on electrophoresis theory and reference gray scale optimization, was proposed to shorten the response time of red particles in three-color EPDs. The driving waveform was composed of erasing stage, reference gray scale forming stage, red driving stage, and white or black driving stage. Firstly, the characteristics of particle motion were analyzed by electrophoresis theory and Stokes law. Secondly, the reference gray scale of the driving waveform was optimized to shorten the distance between red particles and a common electrode plate. Finally, an experimental platform was developed to test the performance of the driving waveform. Experimental results showed that the proposed driving waveform can shorten the response time of red particles by 65.57% and reduce the number of flickers by 66.67% compared with the traditional driving waveform.