Li Wang

Dr. Li Wang

School of Information Engineering, Zhongshan Polytechnic, Zhongshan, China

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
16 March 2020 in Micromachines
Verified
Journal Article
Open access
PDF file
Zichuan YiZichuan Yi
Zichuan Yi
ZHZhenyu Huang
Zhenyu Huang
SLShufa Lai
Shufa Lai
WHWenyao He
Wenyao He
LWLi Wang
Li Wang
GZGuofu Zhou
Guofu Zhou
The traditional driving waveform of the electrowetting display (EWD) has many disadvantages, such as the large oscillation of the target grayscale aperture ratio and a long time for achieving grayscale. Therefore, a driving waveform based on the exponential function was proposed in this study. First, the maximum driving voltage value of 30 V was obtained by testing the hysteresis curve of the EWD pixel unit. Secondly, the influence of the time constant on the driving waveform was analyzed, and the optimal time constant of the exponential function was designed by testing the performance of the aperture ratio. Lastly, an EWD panel was used to test the driving effect of the exponential-function-driving waveform. The experimental results showed that a stable grayscale and a short driving time could be realized when the appropriate time constant value was designed for driving EWDs. The aperture ratio oscillation range of the gray scale could be reduced within 0.95%, and the driving time of a stable grayscale was reduced by 30% compared with the traditional driving waveform.

29 October 2019 in Micromachines
Verified
Journal Article
Open access
PDF file
Zichuan YiZichuan Yi
Zichuan Yi
LLLinwei Liu
Linwei Liu
LWLi Wang
Li Wang
WLWei Li
Wei Li
LSLingling Shui
Lingling Shui
GZGuofu Zhou
Guofu Zhou
The gray-scale display which is driven by PWM (pulse width modulation) in TFT (thin film transistor) electrowetting displays (EWDs) has some shortcomings, such as large amplitude of oil oscillation in pixels and slow response speed for displaying gray scale. In this paper, an amplitude–frequency mixed modulation driving system is proposed to improve the response speed of driving gray scale and enhance the oil stability when the gray scale is displayed. In the initial stage of the driving process, the oil is driven by a high voltage to close to the target luminance, and the driving voltage is then decreased to stabilize the oil. The electrowetting hysteresis curve was used to calculate the relation model between the driving voltage and the luminance of the pixel in the system, and the driving voltage value of the pixel at each driving stage was then set to make the oil precisely and rapidly stabilize at the target luminance value. In the output driving platform, the amplitude–frequency mixed modulation is realized based on the source IC, which was used to realize digital-to-analog conversion. An 8 inch EWD was tested using an Admesy colorimeter, and the experimental results show that the pixel response time is reduced by 70% and the gray-scale oscillation is reduced by 80%.

14 May 2020 in Micromachines
Verified
Journal Article
Open access
PDF file
WHWenyao He
Wenyao He
Zichuan YiZichuan Yi
Zichuan Yi
SSShitao Shen
Shitao Shen
ZHZhenyu Huang
Zhenyu Huang
LLlinwei liu
linwei liu
GZGuofu Zhou
Guofu Zhou
Electrophoretic displays (EPDs) have excellent paper-like display features, but their response speed is as long as hundreds of milliseconds. This is particularly important when optimizing the driving waveform for improving the response speed. Hence, a driving waveform design based on the optimization of particle activation was proposed by analyzing the electrophoresis performance of particles in EPD pixels. The particle activation in the driving waveform was divided into two phases: the improving particle activity phase and the uniform reference grayscale phase. First, according to the motion characteristics of particles in improving the particle activity phase, the real-time EPD brightness value can be obtained by an optical testing device. Secondly, the derivative of the EPD brightness curve was used to obtain the inflection point, and the inflection point was used as the duration of improving particle activity phase. Thirdly, the brightness curve of the uniform reference grayscale phase was studied to set the driving duration for obtaining a white reference grayscale. Finally, a set of four-level grayscale driving waveform was designed and validated in a commercial E-ink EPD. The experimental results showed that the proposed driving waveform can cause a reduction by 180 ms in improving particle activity phase and 120 ms in uniform reference grayscale phase effectively, and a unified reference grayscale can be achieved in uniform reference grayscale phase at the same time.

7 December 2019 in Micromachines
Verified
Journal Article
Open access
PDF file
Zichuan YiZichuan Yi
Zichuan Yi
WFWenyong Feng
Wenyong Feng
LWLi Wang
Li Wang
LLLiming Liu
Liming Liu
YLYue Lin
Yue Lin
GZGuofu Zhou
Guofu Zhou
Electrowetting display (EWD) performance is severely affected by ink distribution and charge trapping in pixel cells. Therefore, a multi structural driving waveform is proposed for improving the aperture ratio of EWDs. In this paper, the hysteresis characteristic (capacitance–voltage, C-V) curve of the EWD pixel is tested and analyzed for obtaining the driving voltage value at the inflection point of the driving waveform. In the composition of driving waveform, a voltage slope is designed for preventing ink dispersion and a reverse pulse is designed for releasing the trapped charge which is caused by hysteresis characteristic. Finally, the frequency and the duty cycle of the driving waveform are optimized for the max aperture ratio by a series of testing. The experimental results show that the proposed driving waveform can improve the ink dispersion behavior, and the aperture ratio of the EWD is about 8% higher than the conventional driving waveform. At the same time, the response speed of the driving waveform can satisfy the dynamic display in EWDs, which provides a new idea for the design of the EWD driving scheme.

24 November 2021 in Membranes
Verified
Journal Article
Open access
PDF file
WZWenjun Zeng
Wenjun Zeng
Zichuan YiZichuan Yi
Zichuan Yi
YZYiming Zhao
Yiming Zhao
LWLi Wang
Li Wang
JZJitao Zhang
Jitao Zhang
CZChongfu Zhang
Chongfu Zhang
Electrowetting displays (EWDs) are one of the most potential electronic papers. However, they have the problem of oil film splitting, which could lead to a low aperture ratio of EWDs. In this paper, a driving waveform was proposed to reduce oil film splitting. The driving waveform was composed of a rising stage and a driving stage. First, the rupture voltage of oil film was analyzed by testing the voltage characteristic curve of EWDs. Then, a quadratic function waveform with an initial voltage was applied at the rising stage to suppress oil film splitting. Finally, a square wave was applied at the driving stage to maintain the aperture ratio of EWDs. The experimental results show that the luminance was increased by 8.78% and the aperture ratio was increased by 4.47% compared with an exponential function driving waveform.

15 October 2024 in Micromachines
Verified
Journal Article
Open access
PDF file
MJMouhua Jiang
Mouhua Jiang
Zichuan YiZichuan Yi
Zichuan Yi
JWJiashuai Wang
Jiashuai Wang
峰李峰 李
峰 李
BLBoyuan Lai
Boyuan Lai
GZGuofu Zhou
Guofu Zhou
Three-color electrophoretic display (EPD) is emerging as a display technology due to its extremely low energy consumption and excellent reflective properties. However, in the process of black and white color image transition, due to the different driving characteristics of red particles, the particles within the three-color EPD cannot be ideally driven to the target position, resulting in the appearance of a red ghost image. For this reason, this study utilized the COMSOL 5.6 finite element simulation method to construct a three-dimensional simulation model to explore the motion characteristics of electrophoretic particles, and then proposed a new driving scheme. The driving scheme aimed to drive red particles to the target position and eliminate the red ghost image by optimizing the pixel erasing stage and employing a high-frequency oscillating voltage. The final experimental results showed that after adopting the proposed driving scheme, the red ghost image was reduced by 8.57% and the brightness of the white color image was increased by 17.50%. This method effectively improved the display performance of three-color EPDs and contributed to the better application of three-color EPDs in the field of high-reflectivity and high-quality display.