Jonas Hubertus

Mr. Jonas Hubertus


Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
10 August 2021 in ACS Applied Materials & Interfaces
Verified
Journal Article
Open access
JHJonas Hubertus
Jonas Hubertus
JNJulian Neu
Julian Neu
SCSipontina Croce
Sipontina Croce
Gianluca RizzelloGianluca Rizzello
Gianluca Rizzello
SSStefan Seelecke
Stefan Seelecke
GSGünter Schultes
Günter Schultes
This paper presents on electromechanical characterization of thin film nickel-based wrinkled electrodes for dielectric elastomer (DE) applications. The investigation of a sandwich composed of a very soft and flexible elastomer carrying an ultrathin metallic electrode, together with its prestretch-dependent wrinkled structure of the electrode, facilitates the understanding of some of its interesting properties. Compared to conventional screen-printed carbon black electrodes, nickel-based thin film electrodes offer an ohmic resistance that is about 2 orders of magnitude lower. This remarkable feature makes it an advantageous electrode material alternative for the development of energy-efficient and high-frequency DE applications. Ultrathin (10–20 nm) layers are sputter deposited as electrodes onto either biaxially or, under pure-shear conditions, uniaxially prestretched silicone membranes. After the sputtering process, the membranes are allowed to relax whereby wrinkled out-of-plane buckled surfaces are obtained. With an initial resistance smaller than 400 Ω/square and a strong adhesion to the silicone, some electrode configurations are able to withstand strains up to 200% while remaining electrically conductive. A linear dependence of the capacitance on strain is revealed, as well as a long-term stability over 10 million cycles of mechanical stretching. All investigated thin film configurations of nickel and nickel–carbon films are suitable as compliant electrodes for DE actuators, as demonstrated by measuring the force characteristics with and without a high voltage. An increased level of prestretch shifts the resistance threshold of the electrode layers to even higher strain levels. In general, the best performance is achieved with pure metallic electrodes deposited on biaxially prestretched silicone membranes.

2 February 2023 in Advanced Functional Materials
Verified
Journal Article
Open access
JHJonas Hubertus
Jonas Hubertus
SCSipontina Croce
Sipontina Croce
JNJulian Neu
Julian Neu
SSStefan Seelecke
Stefan Seelecke
GRGianluca Rizzello
Gianluca Rizzello
GSGünter Schultes
Günter Schultes
Dielectric elastomer (DE) transducers are polymer‐based devices consisting of an insulating elastomeric membrane with compliant electrodes on both sides, forming a flexible capacitor that can work as an actuator or sensor. In this report, a new direct and maskless method is presented to pattern‐compliant metallic electrodes specially developed for DE applications. Highly conductive and stretchable nickel‐based electrodes are first sputter deposited onto pre‐stretched membranes, resulting in a wrinkled surface after relaxation. An arbitrary electrode design is directly patterned onto the double‐sided coated DE membrane by means of an ultra‐short pulse laser system with a wavelength of 355 nm. In this way, it is possible to achieve simultaneous ablation of both electrodes on the top and the bottom side of the silicone membrane, as well as a selective ablation of only the electrode facing the laser. With a minimal optical resolution of 20 µm, the laser structuring method opens the path toward the manufacturing of miniaturized DE transducers, such as micro‐scale DE arrays with integrated conductive paths, as well as the integration of optical features like diffraction gratings into the DE electrodes.

12 October 2023 in Polymers
Verified
Journal Article
Open access
PDF file
BFBettina Fasolt
Bettina Fasolt
FAFabio Beco Albuquerque
Fabio Beco Albuquerque
JHJonas Hubertus
Jonas Hubertus
GSGünter Schultes
Günter Schultes
HSHerbert Shea
Herbert Shea
Stefan SeeleckeStefan Seelecke
Stefan Seelecke
Dielectric Elastomer Actuators (DEAs) enable the realization of energy-efficient and compact actuator systems. DEAs operate at the kilovolt range with typically microampere-level currents and hence minimize thermal losses in comparison to low voltage/high current actuators such as shape memory alloys or solenoids. The main limiting factor for reaching high energy density in high voltage applications is dielectric breakdown. In previous investigations on silicone-based thin films, we reported that not only do environmental conditions and film parameters such as pre-stretch play an important role but that electrode composition also has a significant impact on the breakdown behavior. In this paper, we present a comprehensive study of electrical breakdown on thin silicone films coated with electrodes manufactured by five different methods: screen printing, inkjet printing, pad printing, gold sputtering, and nickel sputtering. For each method, breakdown was studied under environmental conditions ranging from 1 °C to 80 °C and 10% to 90% relative humidity. The effect of different manufacturing methods was analyzed as was the influence of parameters such as solvents, silicone content, and the particle processing method. The breakdown field increases with increasing temperature and decreases with increasing humidity for all electrode types. The stiffer metal electrodes have a higher breakdown field than the carbon-based electrodes, for which particle size also plays a large role.

14 August 2020 in Sensors and Actuators A: Physical
Verified
Journal Article
Closed access
JHJonas Hubertus
Jonas Hubertus
BFBettina Fasolt
Bettina Fasolt
PLPhilipp Linnebach
Philipp Linnebach
SSStefan Seelecke
Stefan Seelecke
GSGünter Schultes
Günter Schultes

27 August 2021 in Actuators
Verified
Journal Article
Open access
PDF file
SCSipontina Croce
Sipontina Croce
JNJulian Neu
Julian Neu
JHJonas Hubertus
Jonas Hubertus
Stefan SeeleckeStefan Seelecke
Stefan Seelecke
GSGuenter Schultes
Guenter Schultes
Gianluca RizzelloGianluca Rizzello
Gianluca Rizzello
Due to their unique combination of features such as large deformation, high compliance, lightweight, energy efficiency, and scalability, dielectric elastomer (DE) transducers appear as highly promising for many application fields, such as soft robotics, wearables, as well as micro electro-mechanical systems (MEMS). To generate a stroke, a membrane DE actuator (DEA) must be coupled with a mechanical biasing system. It is well known that nonlinear elements, such as negative-rate biasing springs (NBS), permit a remarkable increase in the DEA stroke in comparison to standard linear springs. Common types of NBS, however, are generally manufactured with rigid components (e.g., steel beams, permanent magnets), thus they appear as unsuitable for the development of compliant actuators for soft robots and wearables. At the same time, rigid NBSs are hard to miniaturize and integrate in DE-based MEMS devices. This work presents a novel type of soft DEA system, in which a large stroke is obtained by using a fully polymeric dome as the NBS element. More specifically, in this paper we propose a model-based design procedure for high-performance DEAs, in which the stroke is maximized by properly optimizing the geometry of the biasing dome. First, a finite element model of the biasing system is introduced, describing how the geometric parameters of the dome affect its mechanical response. After conducting experimental calibration and validation, the model is used to develop a numerical design algorithm which finds the optimal dome geometry for a given DE membrane characteristics. Based on the optimized dome design, a soft DEA prototype is finally assembled and experimentally tested.

29 June 2022 in Smart Materials and Structures
Verified
Journal Article
Open access
SCSipontina Croce
Sipontina Croce
JNJulian Neu
Julian Neu
Giacomo MorettiGiacomo Moretti
Giacomo Moretti
JHJonas Hubertus
Jonas Hubertus
GSGünter Schultes
Günter Schultes
Gianluca RizzelloGianluca Rizzello
Gianluca Rizzello
Dielectric elastomer (DE) transducers are suitable candidates for the development of compliant mechatronic devices, such as wearable smart skins and soft robots. If many independently-controllable DEs are closely arranged in an array-like configuration, sharing a common elastomer membrane, novel types of cooperative and soft actuator/sensor systems can be obtained. The common elastic substrate, however, introduces strong electro-mechanical coupling effects among neighboring DEs, which highly influence the overall membrane system actuation and sensing characteristics. To effectively design soft cooperative systems based on DEs, these effects need to be systematically understood and modeled first. As a first step towards the development of soft cooperative DE systems, in this paper we present a finite element simulation approach for a 1-by-3 silicone array of DE units. After defining the system constitutive equations and the numerical assumptions, an extensive experimental campaign is conducted to calibrate and validate the model. The simulation results accurately predict the changes in force (actuation behavior) and capacitance (sensing behavior) of the different elements of the array, when their neighbors are subjected to different electro-mechanical loads. Quantitatively, the model reproduces the force and capacitance responses with an average fit higher than 93% and 92%, respectively. Finally, the validated model is used to perform parameter studies, aimed at highlighting how the array performance depends on a relevant set of design parameters, i.e. DE-DE spacing, DE-outer structure spacing, membrane pre-stretch, array scale, and electrode shape. The obtained results will provide important guidelines for the future design of cooperative actuator/sensor systems based on DE transducers.