Sipontina Croce

Dr. Sipontina Croce

orcid

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
27 August 2021 in Actuators
Verified
Journal Article
Open access
PDF file
SCSipontina Croce
Sipontina Croce
JNJulian Neu
Julian Neu
JHJonas Hubertus
Jonas Hubertus
Stefan SeeleckeStefan Seelecke
Stefan Seelecke
GSGuenter Schultes
Guenter Schultes
Gianluca RizzelloGianluca Rizzello
Gianluca Rizzello
Due to their unique combination of features such as large deformation, high compliance, lightweight, energy efficiency, and scalability, dielectric elastomer (DE) transducers appear as highly promising for many application fields, such as soft robotics, wearables, as well as micro electro-mechanical systems (MEMS). To generate a stroke, a membrane DE actuator (DEA) must be coupled with a mechanical biasing system. It is well known that nonlinear elements, such as negative-rate biasing springs (NBS), permit a remarkable increase in the DEA stroke in comparison to standard linear springs. Common types of NBS, however, are generally manufactured with rigid components (e.g., steel beams, permanent magnets), thus they appear as unsuitable for the development of compliant actuators for soft robots and wearables. At the same time, rigid NBSs are hard to miniaturize and integrate in DE-based MEMS devices. This work presents a novel type of soft DEA system, in which a large stroke is obtained by using a fully polymeric dome as the NBS element. More specifically, in this paper we propose a model-based design procedure for high-performance DEAs, in which the stroke is maximized by properly optimizing the geometry of the biasing dome. First, a finite element model of the biasing system is introduced, describing how the geometric parameters of the dome affect its mechanical response. After conducting experimental calibration and validation, the model is used to develop a numerical design algorithm which finds the optimal dome geometry for a given DE membrane characteristics. Based on the optimized dome design, a soft DEA prototype is finally assembled and experimentally tested.

29 June 2022 in Smart Materials and Structures
Verified
Journal Article
Open access
SCSipontina Croce
Sipontina Croce
JNJulian Neu
Julian Neu
Giacomo MorettiGiacomo Moretti
Giacomo Moretti
JHJonas Hubertus
Jonas Hubertus
GSGünter Schultes
Günter Schultes
Gianluca RizzelloGianluca Rizzello
Gianluca Rizzello
Dielectric elastomer (DE) transducers are suitable candidates for the development of compliant mechatronic devices, such as wearable smart skins and soft robots. If many independently-controllable DEs are closely arranged in an array-like configuration, sharing a common elastomer membrane, novel types of cooperative and soft actuator/sensor systems can be obtained. The common elastic substrate, however, introduces strong electro-mechanical coupling effects among neighboring DEs, which highly influence the overall membrane system actuation and sensing characteristics. To effectively design soft cooperative systems based on DEs, these effects need to be systematically understood and modeled first. As a first step towards the development of soft cooperative DE systems, in this paper we present a finite element simulation approach for a 1-by-3 silicone array of DE units. After defining the system constitutive equations and the numerical assumptions, an extensive experimental campaign is conducted to calibrate and validate the model. The simulation results accurately predict the changes in force (actuation behavior) and capacitance (sensing behavior) of the different elements of the array, when their neighbors are subjected to different electro-mechanical loads. Quantitatively, the model reproduces the force and capacitance responses with an average fit higher than 93% and 92%, respectively. Finally, the validated model is used to perform parameter studies, aimed at highlighting how the array performance depends on a relevant set of design parameters, i.e. DE-DE spacing, DE-outer structure spacing, membrane pre-stretch, array scale, and electrode shape. The obtained results will provide important guidelines for the future design of cooperative actuator/sensor systems based on DE transducers.

27 March 2023 in Actuators
Verified
Journal Article
Open access
PDF file
Stefan SeeleckeStefan Seelecke
Stefan Seelecke
JNJulian Neu
Julian Neu
SCSipontina Croce
Sipontina Croce
JHJonas Hubertus
Jonas Hubertus
GSGünter Schultes
Günter Schultes
Gianluca RizzelloGianluca Rizzello
Gianluca Rizzello
This paper presents results of the first phase of “Dielectric Elastomer Cooperative Microactuator Systems” (DECMAS), a project within the German Research Foundation Priority Program 2206, “Cooperative Multistable Multistage Microactuator Systems” (KOMMMA). The goal is the development of a soft cooperative microactuator system combining high flexibility with large-stroke/high-frequency actuation and self-sensing capabilities. The softness is due to a completely polymer-based approach using dielectric elastomer membrane structures and a specific silicone bias system designed to achieve large strokes. The approach thus avoids fluidic or pneumatic compo-nents, enabling, e.g., future smart textile applications with cooperative sensing, haptics, and even acoustic features. The paper introduces design concepts and a first soft, single-actuator demonstrator along with experimental characterization, before expanding it to a 3 × 1 system. This system is used to experimentally study coupling effects, supported by finite element and lumped parameter simulations, which represent the basis for future cooperative control methods. Finally, the paper also introduces a new methodology to fabricate metal-based electrodes of sub-micrometer thickness with high membrane-straining capability and extremely low resistance. These electrodes will enable further miniaturization towards future microscale applications.

20 November 2020 in Proceedings
Verified
Conference Paper
Open access
PDF file
JNJulian Neu
Julian Neu
SCSipontina Croce
Sipontina Croce
JHJonas Hubertus
Jonas Hubertus
GSGuenter Schultes
Guenter Schultes
Gianluca RizzelloGianluca Rizzello
Gianluca Rizzello
Stefan SeeleckeStefan Seelecke
Stefan Seelecke
Dielectric elastomer (DE) technology opens up the possibility of constructing novel lightweight and energy-efficient mechatonic systems, whose design can be tailored to several applications. Numerous types of DE actuator (DEA) configurations, capable of high-force, high-speed, and high-stroke, have been presented in the recent literature. One relevant example is represented by membrane DEAs. This type of actuator consists of a DE film pre-loaded with a mechanical bias. In case the biasing element shows a negative slope (i.e., stiffness) in its force-displacement characteristic, the stroke of the resulting DEA can be significantly magnified. Conventional negative-stiffness biasing systems are based on pre-compressed metal beams, thus they appear as unsuitable for miniaturization to the meso- or micro-scale, as well as for the design of completely flexible actuators for wearable and soft robotics applications. To overcome those issues, a new, novel, full polymer-based DEA configuration is introduced in this work. The core element is the biasing system, which is based on a compliant silicone dome. This type of bias presents a negative stiffness region within its mechanical characteristic; thus, it can serve as a flexible alternative to metal-based biasing systems. It will be shown how the force-displacement characteristic of the dome can be geometrically tuned to match the ones of the DE. In this way, a large actuation stroke can be achieved with a full polymer-based design. After discussing system design and manufacturing, the actuator element is assembled. Finally, experimental stroke characterization is performed.

7 November 2025 in Actuators
Verified
Journal Article
Open access
PDF file
JNJulian Neu
Julian Neu
SCSipontina Croce
Sipontina Croce
ASAndrej Schagaew
Andrej Schagaew
Stefan SeeleckeStefan Seelecke
Stefan Seelecke
Gianluca RizzelloGianluca Rizzello
Gianluca Rizzello
This work introduces two cooperative dielectric elastomer actuator (DEA) array designs, enabling comparison between a fully soft, wearable-oriented system and a rigid, high-performance platform. The soft silicone-based array achieves strokes up to 1.9 mm and maintains 44% displacement under strong bending, demonstrating suitability for haptic feedback in wearable applications. The rigid prototype, based on thermoformed buckling beams, provides strokes up to 2.8 mm, reduced hysteresis, improved stability, and reproducible fabrication, while allowing fine-tuning of preload conditions. Experiments revealed frequency-dependent coupling, enabling stimulation of defective actuators via neighboring elements and amplification of single-element strokes through cooperative excitation. Furthermore, self-sensing effects were exploited for error detection. These results underline the potential of DEA arrays for decentralized control, fault-tolerant actuation, and future applications in soft robotics and wearable systems.

20 November 2020 in Proceedings
Verified
Conference Paper
Open access
PDF file
SCSipontina Croce
Sipontina Croce
JNJulian Neu
Julian Neu
JHJonas Hubertus
Jonas Hubertus
Stefan SeeleckeStefan Seelecke
Stefan Seelecke
GSGünter Schultes
Günter Schultes
Gianluca RizzelloGianluca Rizzello
Gianluca Rizzello
Recent advances in miniaturized actuators and sensors have enabled the development of cooperative systems, in which a complex global task is achieved through the joint collaboration of several microunits. Achieving system miniaturization while maintaining the desired actuation/sensor and cooperative functionality, however, is generally quite challenging from a practical point of view. Smart material transducers based on dielectric elastomer (DE) membranes represent a technology with great potential for the design of high-performance microactuator systems. By designing a miniaturized array of DE taxels, their simultaneous actuation and sensing capabilities can be used to develop large deformation, energy-efficient, multi-functional, and cooperative systems. In addition, the high flexibility of DE material makes the developed system highly suitable for new application fields, such as wearables and soft robotics. To properly design, optimize, and control cooperative DE systems, accurate mathematical models need to be developed first. In this paper, we present a novel physics-based model for an array of three DE actuator taxels. Such a model represents the first step towards the development, optimization, and control of a complex cooperative matrix actuator. Through the proposed model, it is possible to describe the coupling existing between the DE elements, and predict how such coupling effects influence the complete system performance. After presenting the model, the effect of geometrical parameters on the spatial coupling response is studied by means of numerical simulations.