Carbon fiber reinforced polycarbonate (CF/PC) composites have attracted attention for their excellent performances. However, their performances are greatly affected by environmental factors. In this work, the composites were exposed to hydrothermal aging to investigate the effects of a hot and humid environment. The mechanical properties of CF/PC composites with different aging times (0, 7, 14, 21, 28, 35, and 42 days) were analyzed. It was demonstrated that the storage modulus of CF/PC composites with hot water aged for seven days has the highest value in this sampling period and frequency. Through the solid particle erosion experiment, it was found that the hydrothermal aging causes the deviation of the maximum erosion angle of composites, indicating the composites underwent ductile–brittle transformation. Furthermore, the crack and cavity resulting from the absorption of water was observed via the scanning electron microscope (SEM). This suggested that the hydrothermal aging leads to the plasticization and degradation of CF/PC composites, resulting in a reduction of corrosion resistance.
14 October 2023 in Journal of Materials Chemistry A
In some high-altitude areas, solid particle erosion and ice accretion on the wind turbine blades may reduce the power generation efficiency. In view of this, a flexible thermoplastic polyurethane@carbon nanotube/graphene nanoplatelet composite film with rapid electrothermal deicing performance and excellent solid particle erosion resistance was prepared via a simple “spray-hot pressing” method. With a low filler content (2 wt%), the film can heat up to 96.5 °C at 9 V, showing a rapid deicing (150 s). Additionally, it exhibits outstanding photothermal performance (reaching 74.2 °C at 100 mW cm−2) that can assist in deicing and anti-icing. Furthermore, the solid particle erosion resistance has been improved with a low erosion rate of 0.20%. Due to the unique sandwich structure, the film has a high tensile strength and elongation at break, reaching 48.5 MPa and 795.0%, respectively. This work provides a simple approach to protect wind turbine blades in extreme environments.
Thermoplastic polycarbonate (PC) has attracted tremendous attention due to its superior recyclability and environmental friendliness compared with thermosetting resins. In this work, thermoplastic polycarbonate was used as the matrix material and the solid particle erosion resistance of carbon fiber reinforced polycarbonate (CF/PC) composites, as well as the influence of solid particle erosion on the mechanical properties of composites were studied systematically. The results indicated that the maximum erosion angle for CF/PC is 30°, and samples are easier to be eroded when impacted in parallel direction to CF than the vertical. In addition, after 2 min solid particle erosion, the tensile strength and the maximum load decreased by 11.9% and 11.8% respectively, and flexural properties of all samples declined (flexural modulus by 49%, flexural strength and maximum load by 14.6%, flexural strain by 11.9%). Finally, an excellent EMI shielding effectiveness (SE) of around 40 dB over 12 GHz to 18 GHz was achieved for composites. Due to the destruction of CF/PC composite structure and the reduction of its thickness, its EMI shielding effectiveness was greatly decreased to 28 dB after sand erosion.