It is known that the macroscopic properties of multilayer polymer films are largely dominated by the diffuse interphase formed via interfacial diffusion between neighboring layers. However, not much is known about the origin of this effect. In this work, we reveal the role of interfacial diffusion and the diffuse interphase development in multilayer polymer films, based on a compatible poly(vinylidene fluoride) (PVDF)/poly(methyl methacrylate) (PMMA) system fabricated by forced assembly micro-/nanolayer coextrusion. Interestingly, the layer morphology is found to prevail in all investigated multilayer films, even for the nanolayered system where the interdiffusion is substantial. It is also demonstrated that, in the presence of macromolecular and geometrical confinements, interfacial diffusion significantly alters the crystalline morphology and microstructure of the resulting micro-/nanolayered films, which leads to quantitatively different dielectric and rheological properties. More importantly, the combination of dielectric relaxation spectroscopy and energy dispersive X-ray analysis further reveals that multiple diffuse interphases with various length scales exist in the multilayer structures. The presence of these multiple interphases is explained in terms of a proposed physical picture for the interdiffusion of fast-mode mechanism occurring in coextrusion process, and their length scales (i.e., interphase thicknesses) are further mapped quantitatively. These findings provide new insights into the effects of interfacial diffusion and diffuse interphases, towards tailoring interfaces/interphases in micro-/nanolayered polymer structures and for their advanced applications.
10 December 2021 in ACS Sustainable Chemistry & Engineering
Carbon fiber reinforced polycarbonate (CF/PC) composites have attracted attention for their excellent performances. However, their performances are greatly affected by environmental factors. In this work, the composites were exposed to hydrothermal aging to investigate the effects of a hot and humid environment. The mechanical properties of CF/PC composites with different aging times (0, 7, 14, 21, 28, 35, and 42 days) were analyzed. It was demonstrated that the storage modulus of CF/PC composites with hot water aged for seven days has the highest value in this sampling period and frequency. Through the solid particle erosion experiment, it was found that the hydrothermal aging causes the deviation of the maximum erosion angle of composites, indicating the composites underwent ductile–brittle transformation. Furthermore, the crack and cavity resulting from the absorption of water was observed via the scanning electron microscope (SEM). This suggested that the hydrothermal aging leads to the plasticization and degradation of CF/PC composites, resulting in a reduction of corrosion resistance.
The multilayer coextrusion process is known to be a reliable technique for the continuous fabrication of high-performance micro-/nanolayered polymeric products. Using laminar flow conditions to combine polymer pairs, one can produce multilayer films and composites with a large number of interfaces at the polymer-polymer boundary. Interfacial phenomena, including interlayer diffusion, interlayer reaction, interfacial instabilities, and interfacial geometrical confinement, are always present during multilayer coextrusion depending on the processed polymers. They are critical in defining the microstructural development and resulting macroscopic properties of multilayered products. This paper, therefore, presents a comprehensive review of these interfacial phenomena and illustrates systematically how these phenomena develop and influence the resulting physicochemical properties. This review will promote the understanding of interfacial evolution in the micro-/nanolayer coextrusion process while enabling the better control of the microstructure and end use properties.
21 September 2023 in ACS Sustainable Chemistry & Engineering