Hsi-Hsun Tsai

Prof. Hsi-Hsun Tsai

Ming Chi University of Technology, Taiwan
orcid

Research Focus & Metrics

Academic Career Length

31Years (1996-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
2 June 2022 in Polymers
Verified
Journal Article
Open access
PDF file
Hsi-Hsun TsaiHsi-Hsun Tsai
Hsi-Hsun Tsai
SWShao-Jung Wu
Shao-Jung Wu
YWYu-De Wu
Yu-De Wu
WHWei-Zheng Hong
Wei-Zheng Hong
Unlike that of glycol-modified Poly(ethylene terephthalate) (PETG), the crystallinity of PET can be post-adjusted to enhance the mechanical properties of 3D-printed parts such as food-contact tableware and bio-implants. The aforementioned PET material could be 3D printed to produce the desired parts for performance evaluation before mass production by injection molding. In this study, using differential scanning calorimetry (DSC), we examined the pellets, extruded filament, and printed specimen to identify variations in melting and crystalline temperatures, as well as crystallinity. It was also shown by Thermogravimetric Analyzer (TGA) that the addition of talcum powder increased the thermal stability of filament and resulted in an interaction between the fillers and polymer matrix. The crystallinities of the filament and printed specimen were then compared with the yield strengths and Young’s moduli to confirm the effects of the decreased molecular weight of the extruded PET filament. The talcum powder effectively improved the viscosity of the PET melted during the extrusion process for the filament and then enhanced the crystallinity of the PET, thereby achieving a significantly higher Young’s modulus. The printed PET specimen presented an excellent yield strength of 25 MPa and ductile properties with strain-at-break values of 30%, successfully indicating potential applications in food-contact tableware and bio-implants.

1 July 1998 in Journal of Materials Processing Technology
Verified
Journal Article
Closed access
Hsi-Hsun TsaiHsi-Hsun Tsai
Hsi-Hsun Tsai
HHH. Hocheng
H. Hocheng

25 August 2022 in Polymers
Verified
Journal Article
Open access
PDF file
Hsi-Hsun TsaiHsi-Hsun Tsai
Hsi-Hsun Tsai
SWShao-Jung Wu
Shao-Jung Wu
JLJia-Wei Liu
Jia-Wei Liu
SCSin-He Chen
Sin-He Chen
JLJui-Jung Lin
Jui-Jung Lin
PVC injection molding has constrained temperature and shear rate owing to its temperature sensitivity and high viscosity, as well as its low conductivity. Many challenges are associated with the PVC injection molding process used for producing PVC fittings with a multi-cavity mold. Once filling imbalance occurs, the gates and/or runner of the mold should be changed by machine tools, which is time- and cost-intensive. Using Moldex3D and the Taguchi method, this study reveals an approach to eliminate imbalanced filling of multi-cavity molds for PVC injection molding. The injection rate optimization of the filling stage is successfully verified to reduce the imbalance. Furthermore, the temperatures of the molded PVC fittings are only slightly increased by the change in injection rate. The temperatures of fittings in the filling and packing are lower than the degradation temperature of PVC. This approach may help technicians to obtain pilot-run samples for the optimization of molding parameters and ensure degradation-free PVC molding.

4 February 2022 in Polymers
Verified
Journal Article
Open access
PDF file
Hsi-Hsun TsaiHsi-Hsun Tsai
Hsi-Hsun Tsai
YLYi Lin Liao
Yi Lin Liao
The investigation of plastic pallet molding, assisted by a sequential valve gate system, has not yet been performed due to the limitations of the pallet scale. Furthermore, at present, the application of recycled plastics by chemical industries has become extremely popular around the world. This study aimed to determine pallet flatness experimentally and numerically using recycled polypropylene with a large-scale pallet. Short-shot testing on injection molding was performed to obtain short-shot samples for confirmation of the flow front during simulated filling. The real injected pallet profile, which was measured by an ATOS, was compared after confirmation to the numerical profile of the pallet. The pallet’s flatness was accurately compared to the real experimental and numerical results. By adjusting the temperature of the cooling channel within the cavity plate to 55 °C, the flatness of the pallet achieved by the newly proposed sequential valve gate-opening scheme was about 7 mm, which meets the height directional warpage standard determined by the pre-set sequential scheme. The numerical flatness is in line with existing flatness values for pallets. Furthermore, the proposed cooling temperature gives the highest yield in terms of pallet molding from the perspective of the stakeholders.

14 April 2014 in Journal of Intelligent Material Systems and Structures
Verified
Journal Article
Closed access
HLHong-Chen Lai
Hong-Chen Lai
Hsi-Hsun TsaiHsi-Hsun Tsai
Hsi-Hsun Tsai
KHKuo-Yung Hung
Kuo-Yung Hung
HFHui-Ping Feng
Hui-Ping Feng
The purpose of this study was to explore the properties of sintered hydroxyapatite specimens for developing a suitable hydroxyapatite target and a fabrication process for the radio frequency sputtering of implants. Using a compound surface treatment of sand blasting and acid etching followed by hydroxyapatite radio frequency sputtering, this work planned to develop a commercial dental implant system in the near future. First, in addition to producing hydroxyapatite parts using hot isostatic pressing, this study examined the properties of hydroxyapatite parts produced through cold pressing followed by sintering in vacuum and air. The experimental results showed that the index of crystallization, density, and Vickers hardness of the parts sintered in air were more favorable than those of parts sintered in vacuum, and that the parts sintered in vacuum could crack or break. Second, hydroxyapatite sputtering was performed on the hot isostatic pressing–produced and cold pressing–produced targets on titanium dental implant surfaces at power levels of 50 and 90 W. The results showed no cracks in the cold pressing–produced hydroxyapatite targets when the sintering condition was at 1050 °C. By contrast, cracks occurred in the hot isostatic pressing hydroxyapatite targets at a relative density in excess of 93.35%. Observing scanning electron microscopy cross-sectional images revealed that the sputtering deposition rate was approximately 0.456 nm/min at the sputtering power level of 50 W and 1.139 nm/min at 90 W.

26 April 2021 in Advances in Polymer Technology
Verified
Journal Article
Open access
PDF file
CCChun-Der Cheng
Chun-Der Cheng
Hsi-Hsun TsaiHsi-Hsun Tsai
Hsi-Hsun Tsai
YLYi-Ling Liao
Yi-Ling Liao
Plastic pallets are essential devices for the transport of industrial products within containers and can be made from recycled plastics to be more environmentally friendly. However, numerous thin reinforcing ribs are required to mold such large-size pallets, thereby requiring a large-scale injection-molding machine. Many filling gates can reduce the welding lines to enhance the structural strength of the pallet to achieve injection molding using a lower locking force machine. This study simulated the production of recycled polypropylene plastic pellets using a 3500-ton super-large injection-molding machine and the Moldex3D package to derive the flow analysis of the moldability. The PTC Creo software is used to construct plastic pallets ( ), filled by twelve gates using a baffle cooling system. During the four-stage filling of the sequential valve gate system, the flow front spreads from the central gate to the four corners of the pallet, decreasing the number of welding lines, with an average filling pressure of 19.23 MPa by a sequential valve gate scheme which is approximately 65% of the concurrent valve gate opening scheme. The maximum clamping force by this sequential valve gate opening scheme in the molding of plastic pallet is 874.6 tons, only half of the one by concurrent valve gate opening scheme. The average welding angle was 85.7° in the concurrent valve gate opening scheme, with smaller angles than that of the sequential gates controlled scheme. The maximum temperatures during the filling by the two schemes with the concurrent valve gates opened and the sequential gates controlled were 230.5 and 232.5°C, respectively. The sequential valve gate opening scheme’s warpages are smaller than the ones by the concurrent valve gate opening scheme. The warpages of the pallet by the sequential valve gate system are smaller than the ones by the concurrent valve gate system. A higher temperature of the cooling channel and a medium level of cooling time result in lower warpage of the pallet.
1