Electromagnetic radiation from communication and electronic devices, networks, systems and base stations has drawn concern due to excessive global usage with increasing power and operating frequency level. Numerous previous researches only focus on how the radiation from certain frequency ranges of particular devices could harm specific human organs and tissues, resulting in distinct symptoms. In this research, electromagnetic propagation and properties in 14 human organs and tissues were analyzed and investigated based on the organs and tissues’ electromagnetic and mechanical parameters, and chemical composition. Counting the organs and tissues as electromagnetic materials, their permittivity and conductivity, computed by a 4-Cole-Cole mode, directly respective to the operating frequency, are interrelated to wave behavior and hence influence the organs’ response. Tests were conducted in 1 GHz to 105 GHz system settings, covering most microwave frequency uses: 2.4 GHz of 4G-LTE, Wi-Fi, Bluetooth, ZigBee and the 5G ranges: 28 GHz of 5G-mmW and 95 GHz of 5G-IoT. Trial human organs and tissues were placed in the wave propagation direction of 2.4 GHz and 28 GHz dipole antennas, and a waveguide port operating from 95 to 105 GHz. The quantitative data on the effects of 5G penetration and dissipation within human tissues are presented. The absorbance in all organs and tissues is significantly higher as frequency increases. As the wave enters the organ-tissue model, the wavelength is shortened due to the high organ-tissue permittivity. Skin-Bone-Brain layer simulation results demonstrate that both electric and magnetic fields vanish before passing the brain layer at all three focal frequencies of 2.4 GHz, 28 GHz and 100 GHz.

Simple, instantaneous, contactless, multiple-point metamaterial-inspired microwave sensors, composed of multi-band, low-profile metamaterial-inspired antennas, were developed to detect and identify meningioma tumors, the most common primary brain tumors. Based on a typical meningioma tumor size of 5–20 mm, a higher operating frequency, where the wavelength is similar or smaller than the tumor target, is crucial. The sensors, designed for the microwave Ku band range (12–18 GHz), where the electromagnetic property values of tumors are available, were implemented in this study. A seven-layered head phantom, including the meningioma tumors, was defined using actual electromagnetic parametric values in the frequency range of interest to mimic the actual human head. The reflection coefficients can be recorded and analyzed instantaneously, reducing high electromagnetic radiation consumption. It has been shown that a single-band detection point is not adequate to classify the nonlinear tumor and head model parameters. On the other hand, dual-band and tri-band metamaterial-inspired antennas, with additional detecting points, create a continuous function solution for the nonlinear problem by adding extra observation points using multiple-band excitation. The point mapping values can be used to enhance the tumor detection capability. Two-point mapping showed a consistent trend between the S₁₁ value order and the tumor size, while three-point mapping can also be used to demonstrate the correlation between the S₁₁ value order and the tumor size. This proposed multi-detection point technique can be applied to a sensor for other nonlinear property targets. Moreover, a set of antennas with different polarizations, orientations, and arrangements in a network could help to obtain the highest sensitivity and accuracy of the whole system.

Circular polarization switching in helical metamaterial structures in the mid-infrared regime is numerically demonstrated. The low loss and broad transmission of right- and left-circularly polarized waves is found within the circular polarization switching bands. The switching behavior is maintained until the helix pitch or helix height reaches a quarter of the operating wavelength in the conventional and connected 4-layer planar helices, while the electromagnetic couplings among the four quarter helical parts conserve the 'helical-like' properties for the free-stand 4-layer planar helices, when the helix height is up to one eighth of the operating wavelength. These different helical orientations can be favorable in circular polarization switching and optical and light applications. Since the transmission switching bands are greater than 25% bandwidth, these switching designs could operate in the broadband spectral domain.

Tunable negative electromagnetic properties: permittivity, permeability, and refractive index, in mimic Chlorophyll metamaterial structures in the X-and Ku-band regimes are theoretically and numerically demonstrated. A very broad negative permeability covering the majority of the X-and Ku bands, from 8 GHz to 16 GHz, is observed, while five negative permittivity bands are found within the same range. The two aforementioned properties result in a broad, greater than 25% bandwidth, low-loss negative-refractive index transmission band. These negative electromagnetic properties can be effectively tailored within the low-loss multi-transmission and the high-loss multi-absorption bands in the operating frequency range by modifying the structure's tiller part or the artificial hydrophobic or Phytol tail. By focusing either on the transmission or the absorption bands, these passive always-on bio-inspired metamaterials could be utilized in microelectronic, communication and photonic, and optic devices.

A compact 15 mm × 15 mm multi-band metamaterial-inspiredprinted antenna, composed of a simple microstrip antenna and a metamaterial superstate, is developed to accommodate nowadays advanced wireless communication devices and networks, where multi-functional tasks are simultaneously performed in different frequency ranges efficiently. A quintuple homocentric circular split ring resonator is explicitly designed as a band enhancer metamaterial superstate. The metamaterial geometry and orientation associated with the antenna location and radiating are optimized for the greatest consequence, where the resonances electrically and magnetically couple with the antenna radiation, generating quintuple bands in the X band: 8–12 GHz. The main lobe directions indicate an excellent directional propagation. This metamaterial-inspired antenna was designed and fabricated using a low cost commercial FR4 substrate offering a good cost margin for potential mass production. Four of five bands have a gain greater than 6dBi, which can be improved by using low-loss substrate. The measured and simulated results are in good agreement.