Chaiyong Soemphol

Chaiyong Soemphol


Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
24 December 2021 in Applied System Innovation
Verified
Journal Article
Open access
PDF file
ANAdisorn Nuan-On
Adisorn Nuan-On
NANiwat Angkawisittpan
Niwat Angkawisittpan
NPNawarat Piladaeng
Nawarat Piladaeng
CSChaiyong Soemphol
Chaiyong Soemphol
A detection system for water adulteration in honey is proposed. It consists of a modified SMA-connector sensor and a vector network analyzer. A modified SMA-connector sensor is applied to measure complex relative permittivity, electrical conductivity, and phase constant of honey samples with the open-ended method. The system is tested in the frequency range of 0.5–4.0 GHz at the sample temperature of 25 °C. The relationships between the complex relative permittivity, electrical conductivity, the phase constant, and the honey samples with different concentrations (0–30%w/w) are determined. The experimental results show that the real part of the complex relative permittivity is significantly proportional in honey samples with adulteration of water in the range of 0–30%w/w. The frequency of 0.6 GHz is a suitable frequency for detection with a real part of complex relative permittivity as an indicator. The frequency of 3.74 GHz is an appropriate frequency for detection with electrical conductivity as in indicator while the frequency of 4.0 GHz is suitable for detection with phase constant as an indicator. In addition, the data are analyzed with regression analysis. This technique is also performed on natural latex samples to determine the dry rubber content. The frequency of 0.5 GHz is a suitable frequency with a real part of complex relative permittivity as an indicator while the frequency of 4.0 GHz is a suitable frequency with an imaginary part of complex relative permittivity, electrical conductivity, and phase constant as the indicators. The results demonstrate that it is possible to apply this technique to determine the dry rubber content in the natural latex samples as well.

1 March 2024 in International Journal of Power Electronics and Drive Systems (IJPEDS)
Verified
Journal Article
Open access
PDF file
PPPiyapat Panmuang
Piyapat Panmuang
CPChonlatee Photong
Chonlatee Photong
CSChaiyong Soemphol
Chaiyong Soemphol
The booming electric vehicle industry seeks fast charging solutions to address the safety risks posed by high-power charging, including thermal runaway and other safety issues. This study investigates the impact of combining liquid with thermoelectric cooling on battery thermal management. A series of experiments were conducted using various thermal batteries, liquid flow rates and batteries temperature thermoelectric. The experimental results compared air cooling (AC), water cooling (WC), and thermoelectric cooling (TEC) with different water flow (WF) rate in system and revealed that TEC with WF at 4.0 l/min was the best cooling system. This system can decrease the temperature by about 41-52% from the maximum temperature at discharge rates of 1.0, 1.5, 2.0, 2.5, and 3.0 °C. However, TEC with WF 1.0 and 2.0 l/min can effectively lower the temperature and reduce energy consumption compared to other cooling systems, while still maintaining the battery temperature within appropriate ranges.

1 March 2023 in Indonesian Journal of Electrical Engineering and Computer Science
Verified
Journal Article
Open access
PDF file
PPPeeradapath Parametpisit
Peeradapath Parametpisit
PPPiyapat Panmuang
Piyapat Panmuang
ASAmornthep Sonsilphong
Amornthep Sonsilphong
CSChaiyong Soemphol
Chaiyong Soemphol
Due to the effects of the change in temperature that have resulted in dramatic changes in the livelihoods of crickets. Hence, the implementation of cooling technologies is an important factor for alleviating these negative consequences. This research presents the experimentally investigate the feasibility of employing a thermoelectric cooler in combination with an evaporative air-cooling system for two-spotted cricket (Gryllus bimaculatus) rearing process. The proposed cooling system has been installed to reduce the temperature that appropriate for the cricket rearing. The experimental results show that the product air temperature of cricket rearing pens with thermoelectric evaporative air-cooling system decreases form ambient air. The average temperature of the cricket rearing pens with thermoelectric evaporative air-cooling system is 29.66 °C, with the highest temperature at 31.40 °C. While the average temperature of the cricket rearing pens without thermoelectric evaporative air-cooling system is 33.75 °C, with the highest temperature at 37.10 °C. Furthermore, this research also shows that this proposed system can improve cricket survival rate. The crickets that reared in the prototype system have a survival rate of 88.5%, while survival rate of crickets in an uncontrolled pen is 67.2%. This paper provides a potential of applying thermoelectric evaporative air-cooling for cricket farming.

1 October 2025 in Bulletin of Electrical Engineering and Informatics
Verified
Journal Article
Open access
PDF file
CSChaiyong Soemphol
Chaiyong Soemphol
TTTaweesak Thongsan
Taweesak Thongsan
SNSakuntala Ninkaew
Sakuntala Ninkaew
PPPiyapat Panmuang
Piyapat Panmuang
Air pollution has become a global issue due to rapid urbanization and industrialization. Air quality monitoring is essential for mitigating the adverse effects of air pollution on public health and the environment. This study presents a solar-powered internet of thing (IoT)-based air quality monitoring system designed for autonomous operation in outdoor settings. The prototype integrates an ESP32 microcontroller with low-cost sensors for PM2.5, PM10, temperature, humidity, and heat index. Powered by a solar panel and battery, the system ensures off-grid functionality, while Wi-Fi transmission to the Blynk platform, enables real-time visualization, historical record storage, and instant user access through mobile dashboards. The system was calibrated against reference instruments and deployed for 14 consecutive days. Results confirmed stable data transmission and reliable performance that suitability for outdoor use without reliance on grid power under real-world conditions. Furthermore, correlation analysis showed a strong relationship between PM2.5 and PM10, and moderate associations with humidity. Regression analysis further identified humidity and heat index as the most significant predictors, while temperature exhibited only minor influence. These findings demonstrate the feasibility of a low-cost, portable, and energy-autonomous IoT monitoring system, providing accurate real-time insights to support evidence-based air quality management.

1 September 2024 in Nano Express
Verified
Journal Article
Open access
CSChaiyong Soemphol
Chaiyong Soemphol
TDThananchai Dasri
Thananchai Dasri
This report presents a mostly numerical investigation of solar absorptance enhancement in PSCs through solving partial differential equations. The designed structural device comprised five layers of the transparent conducting contact (ITO), the electron transport layer (TiO2), the active layer (CH3NH3PBI3) embedding with plasmonic silver nanoparticles (AgNPs), the hole transporting layer (NiO), and the back reflectors (Ag). The calculation results showed that the device performance was highly dependent on the particle size of AgNP, structural formation and the location of the AgNPs. Overall, the optimum particle radius was r = 10 nm , located at the middle of the activated layer z = 0 nm , a 2-dimensional array of 2 × 2 particles per unit cell and an interparticle distance of 4 nm were achieved for the AgNPs in the active layer (AL) of the PSCs with the highest optical enhancement of η = 1.24 .

1 January 2025 in Indonesian Journal of Electrical Engineering and Computer Science
Verified
Journal Article
Open access
PDF file
SCSirinya Chaila
Sirinya Chaila
CSChaiyong Soemphol
Chaiyong Soemphol
The optimization of nutrient management is crucial for successful soilless plant cultivation, where precise control of fertilizer application significantly impacts plant growth. This research addresses the challenge of developing an effective nutrient control system tailored for soilless cultivation by focusing on regulating electrical conductivity (EC) levels in nutrient solutions. The proposed system utilizes mathematical models and linear regression techniques to manage the nutrient solution mixing ratio. To ensure accuracy, sensors were calibrated, achieving a 99.59% accuracy rate for pH measurement and 95.25% for EC measurement. Experimental validation of the system demonstrated that, with a target EC range of 1.5-2.3 mS/cm, a 10 L solution volume yielded a maximum error rate of 1.75% and an average error of 0.95%. In contrast, a 50 L solution volume showed a slight increase in maximum error rate to 2.89% and an average error of 2.08%. These results highlight the system’s capability to precisely adjust EC levels using a defined linear regression model for AB liquid fertilizer ratios. In conclusion, the developed system effectively controls nutrient levels, demonstrating its potential for enhancing nutrient management in hydroponic farming applications.