Costs and toxicity concerns are at the center of a heated debate regarding the implementation of perovskite solar cells (PSCs) into commercial products. The first bottleneck could be overcome by eliminating the top metal electrode (generally gold) and the underlying hole transporting material and substituting both with one single thick layer of conductive carbon, as in the so‐called carbon‐based PSCs (C‐PSCs). The second issue, related to the presence of lead, can be tackled by resorting to other perovskite structures based on less toxic metallic components. An interesting case is that of the double perovskite Cs2AgBiBr6, which at present still lacks the outstanding optoelectronic performances of the lead‐based counterparts but is very stable to environmental factors. In this work, the processing of carbon electrodes onto Cs2AgBiBr6‐based C‐PSCs was reported, starting from an additive‐free isopropanol ink of a carbon material obtained from the hydrothermal recycling of waste tires and employing a high‐throughput ultrasonic spray coating method in normal environmental conditions. Through this highly sustainable approach that ensures a valuable step from an end‐of‐life to an end‐of‐waste status for used tires, devices were obtained delivering a record open circuit voltage of 1.293 V, which might in the future represent ultra‐cheap solutions to power the indoor Internet of Things ecosystem.
The need to develop sustainable energy solutions is an urgent requirement for society, with the additional requirement to limit dependence on critical raw materials, within a virtuous circular economy model. In this framework, it is essential to identify new avenues for light‐conversion into clean energy and fuels exploiting largely available materials and green production methods. Metal oxide semiconductors (MOSs) emerge among other species for their remarkable environmental stability, chemical tunability, and optoelectronic properties. MOSs are often key constituents in next generation energy devices, mainly in the role of charge selective layers. Their use as light harvesters is hitherto rather limited, but progressively emerging. One of the key strategies to boost their properties involves doping, that can improve charge mobility, light absorption and tune band structures to maximize charge separation at heterojunctions. In this review, effective methods to dope MOSs and to exploit the derived benefits in relation to performance enhancement in different types of devices are identified and critically compared. The work is focused specifically on the best opportunities coming from the use of non‐critical raw materials, so as to contribute in defining an economically feasible roadmap for light conversion technologies based on these highly stable and widely available compounds.
The race to the future generation of low‐cost photovoltaic devices continuously takes on added momentum with the appearance of novel practical solutions for the fabrication of perovskite solar cells (PSCs), a paradigm technology for ultracheap light‐to‐electricity conversion. Much has been done in the past few years toward defining standard protocols for the assessment of their efficiency and stability, aiming at achieving a worldwide consensus on the issue, that will allow reliable reporting of new data. While this is undoubtedly a step ahead toward commercialization of these devices, it also often triggers researchers to test record architectures using benchmark configurations, mainly for what regards the ancillary layers that extract electrical charges from the photoexcited perovskite. In particular, the mostly used hole‐transporting material (HTM) is the small‐molecule spiro‐OMeTAD, which is also well known to be the origin of PSC degradation after prolonged operation. Herein, it is aimed to remark the huge impact of the HTM on PSC performance, recalling major issues associated with the conventional spiro‐based one and providing an overview of state‐of‐the‐art alternatives. Finally, possible scenarios for the future development of smart HTMs are also envisioned, as charge‐extracting layers, with a real active role in ensuring PSC operational stability.
1 January 2019 in Solar Energy Materials and Solar Cells