The rise of graphene as an innovative electronic material promoted the study and development of new 2-D materials. Among them, reduced graphene oxide (rGO) appears like an easy and cost-effective solution for the fabrication of thin-film transistors (TFTs). To understand the limits and possible application fields of rGO-based TFTs, a proper estimation of the device parameters is of extreme importance. In this work, liquid-gated ambipolar rGO-TFTs are characterized and a description of their working principle is given. Particular attention is paid toward the importance of the transistors’ OFF-state conductivity that was modeled as a resistance connected in parallel with the TFT. Thanks to this model, the main transistor parameters were extrapolated from rGO-TFTs with different levels of electrochemical reduction. The extracted parameters allowed understanding that rGO-TFTs have similar holes and electrons mobilities, and the more pronounced p-type behavior of the devices is due to a positive shift in the p-type and n-type threshold voltages.
Electrolyte-gated organic field-effect transistors (EGOFETs) have been fabricated using 6,13-Bis (triisopropyl-silylethynyl) pentacene (TIPS-pentacene) as an organic semiconductor active material. Despite the organic semiconductor being deposited in air by drop casting, our EGOFETs showed performance comparable with state-of-the-art technologies, and devices kept their functionalities while gated with saline solution at 37 °C for several days. In addition, the biocompatibility of the material was successfully investigated, promoting the use of TIPS-pentacene -based EGOFETs for biosensing applications.
A general equivalent circuit model for the metal/organic semiconductor (OSC)/liquid/metal system is presented. Each circuital element, representative of a physically observable phenomenon associated with the device working principle, is analyzed and discussed. Two case studies of electrochemical impedance spectroscopy of devices featuring NaCl (concentration of 0.1 M) and MilliQ water as liquid are reported, showing that both cases can be considered as a particular case of the general model presented in this paper. Experimental verification of the two practical cases is achieved by performing measurements onto electrodes coated by either an n-type or a p-type OSC deposited by sublimation or drop casting, respectively. The good agreement with the experimental data makes our model a useful tool for the characterization and failure analysis of electronic devices, such as water-gated transistors, electrophysiological interfaces, fuel cells, and others electrochemical systems.
Electrolyte-gated organic field-effect transistors (EGOFETs) were fabricated using 6,13-Bis(triisopropylsilylethynyl)pentacene (TIPS-Pentacene) as a p-type organic semiconductor. The devices were characterized as reference-less (RL) EGOFETs, and the self-polarization mechanism was studied. The fact that EGOFETs can exhibit field-effect behavior even without the gate electrode was demonstrated. This work provides useful guidelines for optimizing RL-EGOFET technology.