Ayman A. Althuwayb

Dr. Ayman A. Althuwayb

Jouf University
orcid

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
21 October 2020 in IEEE Access
Verified
Journal Article
Open access
Mohammad AlibakhshikenariMohammad Alibakhshikenari
Mohammad Alibakhshikenari
FBFatemeh Babaeian
Fatemeh Babaeian
Bal VirdeeBal Virdee
Bal Virdee
SASonia Aissa
Sonia Aissa
Leyre AzpilicuetaLeyre Azpilicueta
Leyre Azpilicueta
Ernesto LimitiErnesto Limiti
Ernesto Limiti
Nowadays synthetic aperture radar (SAR) and multiple-input-multiple-output (MIMO) antenna systems with the capability to radiate waves in more than one pattern and polarization are playing a key role in modern telecommunication and radar systems. This is possible with the use of antenna arrays as they offer advantages of high gain and beamforming capability, which can be utilized for controlling radiation pattern for electromagnetic (EM) interference immunity in wireless systems. However, with the growing demand for compact array antennas, the physical footprint of the arrays needs to be smaller and the consequent of this is severe degradation in the performance of the array resulting from strong mutual-coupling and crosstalk effects between adjacent radiating elements. This review presents a detailed systematic and theoretical study of various mutual-coupling suppression (decoupling) techniques with a strong focus on metamaterial (MTM) and metasurface (MTS) approaches. While the performance of systems employing antenna arrays can be enhanced by calibrating out the interferences digitally, however it is more efficient to apply decoupling techniques at the antenna itself. Previously various simple and cost-effective approaches have been demonstrated to effectively suppress unwanted mutual-coupling in arrays. Such techniques include the use of defected ground structure (DGS), parasitic or slot element, dielectric resonator antenna (DRA), complementary split-ring resonators (CSRR), decoupling networks, P.I.N or varactor diodes, electromagnetic bandgap (EBG) structures, etc. In this review, it is shown that the mutual-coupling reduction methods inspired By MTM and MTS concepts can provide a higher level of isolation between neighbouring radiating elements using easily realizable and cost-effective decoupling configurations that have negligible consequence on the array’s characteristics such as bandwidth, gain and radiation efficiency, and physical footprint.

24 March 2021 in Sensors
Verified
Journal Article
Open access
PDF file
RARammah Alahnomi
Rammah Alahnomi
ZAHRILADHA ZAKARIAZAHRILADHA ZAKARIA
ZAHRILADHA ZAKARIA
ZYZulkalnain Mohd Yussof
Zulkalnain Mohd Yussof
Ayman A. AlthuwaybAyman A. Althuwayb
Ayman A. Althuwayb
AAAmmar Alhegazi
Ammar Alhegazi
NRNorhanani Abd Rahman
Norhanani Abd Rahman
Recent developments in the field of microwave planar sensors have led to a renewed interest in industrial, chemical, biological and medical applications that are capable of performing real-time and non-invasive measurement of material properties. Among the plausible advantages of microwave planar sensors is that they have a compact size, a low cost and the ease of fabrication and integration compared to prevailing sensors. However, some of their main drawbacks can be considered that restrict their usage and limit the range of applications such as their sensitivity and selectivity. The development of high-sensitivity microwave planar sensors is required for highly accurate complex permittivity measurements to monitor the small variations among different material samples. Therefore, the purpose of this paper is to review recent research on the development of microwave planar sensors and further challenges of their sensitivity and selectivity. Furthermore, the techniques of the complex permittivity extraction (real and imaginary parts) are discussed based on the different approaches of mathematical models. The outcomes of this review may facilitate improvements of and an alternative solution for the enhancement of microwave planar sensors’ normalized sensitivity for material characterization, especially in biochemical and beverage industry applications.

26 October 2020 in Journal of Infrared, Millimeter, and Terahertz Waves
Verified
Journal Article
Open access
PDF file
Mohammad AlibakhshikenariMohammad Alibakhshikenari
Mohammad Alibakhshikenari
BVBal S. Virdee
Bal S. Virdee
Ayman A. AlthuwaybAyman A. Althuwayb
Ayman A. Althuwayb
SASonia Aïssa
Sonia Aïssa
CSChan H. See
Chan H. See
ELErnesto Limiti
Ernesto Limiti
This paper presents the results of a study on improving the performance parameters such as the impedance bandwidth, radiation gain and efficiency, as well as suppressing substrate loss of an innovative antenna for on-chip implementation for millimetre-wave and terahertz integrated-circuits. This was achieved by using the metamaterial and the substrate-integrated waveguide (SIW) technologies. The on-chip antenna structure comprises five alternating layers of metallization and silicon. An array of circular radiation patches with metamaterial-inspired crossed-shaped slots are etched on the top metallization layer below which is a silicon layer whose bottom surface is metalized to create a ground plane. Implemented in the silicon layer below is a cavity above which is no ground plane. Underneath this silicon layer is where an open-ended microstrip feedline is located which is used to excite the antenna. The feed mechanism is based on the coupling of the electromagnetic energy from the bottom silicon layer to the top circular patches through the cavity. To suppress surface waves and reduce substrate loss, the SIW concept is applied at the top silicon layer by implementing the metallic via holes at the periphery of the structure that connect the top layer to the ground plane. The proposed on-chip antenna has an average measured radiation gain and efficiency of 6.9 dBi and 53%, respectively, over its operational frequency range from 0.285–0.325 THz. The proposed on-chip antenna has dimensions of 1.35 × 1 × 0.06 mm3. The antenna is shown to be viable for applications in millimetre-waves and terahertz integrated-circuits.

13 May 2021 in Scientific Reports
Verified
Journal Article
Open access
PDF file
Mohammad AlibakhshikenariMohammad Alibakhshikenari
Mohammad Alibakhshikenari
BVBal S. Virdee
Bal S. Virdee
SSShahram Salekzamankhani
Shahram Salekzamankhani
SASonia Aïssa
Sonia Aïssa
CSChan H. See
Chan H. See
ELErnesto Limiti
Ernesto Limiti
This paper presents the results of a study on developing an effective technique to increase the performance characteristics of antenna arrays for sub-THz integrated circuit applications. This is essential to compensate the limited power available from sub-THz sources. Although conventional array structures can provide a solution to enhance the radiation-gain performance however in the case of small-sized array structures the radiation properties can be adversely affected by mutual coupling that exists between the radiating elements. It is demonstrated here the effectiveness of using SIW technology to suppress surface wave propagations and near field mutual coupling effects. Prototype of 2 × 3 antenna arrays were designed and constructed on a polyimide dielectric substrate with thickness of 125 μm for operation across 0.19–0.20 THz. The dimensions of the array were 20 × 13.5 × 0.125 mm3. Metallization of the antenna was coated with 500 nm layer of Graphene. With the proposed technique the isolation between the radiating elements was improved on average by 22.5 dB compared to a reference array antenna with no SIW isolation. The performance of the array was enhanced by transforming the patch to exhibit metamaterial characteristics. This was achieved by embedding the patch antennas in the array with sub-wavelength slots. Compared to the reference array the metamaterial inspired structure exhibits improvement in isolation, radiation gain and efficiency on average by 28 dB, 6.3 dBi, and 34%, respectively. These results show the viability of proposed approach in developing antenna arrays for application in sub-THz integrated circuits.

30 December 2022 in IEEE Access
Verified
Journal Article
Open access
Ayman A. AlthuwaybAyman A. Althuwayb
Ayman A. Althuwayb
Mohammad AlibakhshikenariMohammad Alibakhshikenari
Mohammad Alibakhshikenari
Bal VirdeeBal Virdee
Bal Virdee
Nasr RashidNasr Rashid
Nasr Rashid
KKKhaled Kaaniche
Khaled Kaaniche
Francisco FalconeFrancisco Falcone
Francisco Falcone
This article presents a sub-6GHz ISM-band flexible wearable MIMO antenna array for wireless body area networks (WBANs) and biomedical telemetry devices. The array is based on metasurface inspired technology. The antenna array consists of 2×2 matrix of triangular-shaped radiation elements that were realized on 0.8 mm thick Rogers RT/duroid 5880 substrate. Radiation characteristics of the array are enhanced by isolating the surface current interaction between the individual radiators in the array. This is achieved by inserting an electromagnetic bandgap (EBG) decoupling structure between the radiating elements. The radiating elements were transformed into a metasurface by etching sub-wavelength slots inside them. The periodic arrangement of slots acts like resonant scatterers that manipulate the electromagnetic response of the surface. Results confirm that by employing the decoupling structure and sub-wavelength slots the isolation between the radiators is significantly improved (>34.8 dB). Moreover, there is an improvement in the array’s fractional bandwidth, gain and the radiation efficiency. The optimized array design for operation over 5.0-6.6 GHz has an average gain and efficiency of 10 dBi and 83%, respectively. Results show that the array’s performance is not greatly affected by a certain amount of bending. In fact, the antenna maintains a gain between 8.65-10.5 dBi and the efficiency between 77-83%. The proposed MIMO antenna array is relatively compact, can be easily fabricated on one side of a dielectric material, allows easy integration with RF circuitry, is robust, and maintains its characteristics with some bending. These features make it suitable for various wearable applications and biomedical telemetry devices.

18 October 2021 in Journal of Physics D: Applied Physics
Verified
Journal Article
Open access
PDF file
INIram Nadeem
Iram Nadeem
Mohammad AlibakhshikenariMohammad Alibakhshikenari
Mohammad Alibakhshikenari
FBFatemeh Babaeian
Fatemeh Babaeian
Ayman A. AlthuwaybAyman A. Althuwayb
Ayman A. Althuwayb
BVBal S. Virdee
Bal S. Virdee
ELErnesto Limiti
Ernesto Limiti