Osamah Sabah Barrak

Dr. Osamah Sabah Barrak


Research Focus & Metrics

Academic Career Length

11Years (2016-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 January 2022 in Materials Research
Verified
Journal Article
Open access
SHSafaa M Hassoni
Safaa M Hassoni
OBOsamah Sabah Barrak
Osamah Sabah Barrak
MIMuammar Ibrahim Ismail
Muammar Ibrahim Ismail
SHSabah Khammass Hussein
Sabah Khammass Hussein

19 June 2024 in International Journal of Applied Mechanics and Engineering
Verified
Journal Article
Open access
MHMahmood Mohammed Hamzah
Mahmood Mohammed Hamzah
OBOsamah Sabah Barrak
Osamah Sabah Barrak
IAIsam Tareq Abdullah
Isam Tareq Abdullah
AHAws Abdulillah Hussein
Aws Abdulillah Hussein
SHSabah Khammass Hussein
Sabah Khammass Hussein
Resistance spot welding (RSW) is an important fusion welding process used in many applications, including storage tanks, pipes, and medical tools. For this, should be improved the joints and developing the process parameters and through this research will be discussed the results and concept development. Herein, 1 mm-thick AISI 316 austenitic stainless steel was welded by RSW, and the effect of the welding process parameters, such as “welding current, pulses, squeeze time, and welding time”, on the mechanical properties, nugget diameter (ND), and microstructure of AISI 316 were investigated. As a result, there was a direct relationship between shear-tensile force and ND. The maximum shear-tensile force (12.5 kN) was obtained using 7500 A, 3 pulses, 1.8 s squeeze time, and 1 s welding time. The ND was maximized using 7500 A, 3 pulses, 1.6 s squeeze time, and 0.8 s welding time. The DOE analysis gives an indication about the relation between the parameters and ND on the hand and the parameters and shear strength on the other hand. The microstructure was investigated by optical microscopy, revealing the presence of martensitic, widmanstatten austenite, and ferrite structures.

8 April 2023 in Journal of Techniques
Verified
Journal Article
Open access
PDF file
OBOsamah Sabah Barrak
Osamah Sabah Barrak
OTOsamah Fattah Taresh
Osamah Fattah Taresh
MHMahmood Mohammed Hamzah
Mahmood Mohammed Hamzah
RSRusul Ahmed Shakir
Rusul Ahmed Shakir
A hot press process was used as a technique to pound a polyamide type of polymer of a thickness (2mm) to stainless steel AISI 316L of the thickness (1mm). A hybrid joint of dissimilar material was accomplished by a hot press bonding process. During the joining process, three different parameters of process were used: processing temperature of 175, 170 and 165°C, processing pressure of 3, 6 and 9 bar and time of 1.5, 3 and 4.5 min. The surface of stainless steel was prepared and treated by a mechanical treatment (surface grinding) to improve the wettability to increase the shear strength. A shear tensile, scanning electron microscope (SEM) and energy dispersive spectrometry (EDS) tests were used to investigate and examine the joint (bounding) specimens. The Minitab program was used to analyze the effect of the parameters of the joining process on the joint properties. The maximum and minimum values of shear force are exhibited at a processing temperature of 165°C, applied pressure of 6 bars and processing time of 1.5 minutes; the minimum shear force was found to be 675 N, while the maximum shear force was 2182 N at a processing temperature of 175°C, applied pressure of 6 bars and processing time of 3 minutes. The tested joints failed by an interfacial shear and necking in the polymer side with a ductile fracture. The joining process occurred through a mechanical interlocking between the molten polymer and the treated surface of the steel specimen. The average thickness of the joining line for the tested specimens was 8µm.

20 January 2024 in Journal of Techniques
Verified
Journal Article
Open access
PDF file
OBOsamah Sabah Barrak
Osamah Sabah Barrak
SCSami Chatti
Sami Chatti
SBSlim Ben-Elechi
Slim Ben-Elechi
Resistance spot welding (RSW) was used to fabricate Similar joints of low-carbon steel AISI 1005 in lap joint design RSW. Evaluate the welding current, squeeze time, welding time, and hold time, which affects resistance spot welding. A tensile-shear force fracture test was used to assess the mechanical properties Using a universal tensile testing machine. The microstructure of the fusion zone was examined using a scanning electron microscope (SEM). According to the data, the shear strength values increased as the welding current increased. Additionally, it was shown that most failures occurred closer to the fusion zone (FZ). The primary cause is the crystal lattice's strained distortion, which weakens the nearby region of the fusion zone.

1 July 2020 in IOP Conference Series: Materials Science and Engineering
Verified
Conference Paper
Open access
OBOsamah Sabah Barrak
Osamah Sabah Barrak
MSMursal Luaibi Saad
Mursal Luaibi Saad
Marwan T. MezherMarwan T. Mezher
Marwan T. Mezher
SHSabah Khammass Hussein
Sabah Khammass Hussein
MHMahmood Mohammed Hamzah
Mahmood Mohammed Hamzah
The objective of this work is using a hot press technique to join a hybrid structure of aluminum alloy AA6061-T6 sheet of 1mm thickness together with polyamide PA sheet of 2mm thickness. The aluminum alloy specimen was pre-holed with two holes of 5mm diameter. The joining process was carried out with a lap joint configuration. Three different process parameters of the joining process were used: temperature (164, 172 and180°C), pressure (4, 7 and 10 bar) and time (1, 2.5 and 4 min.). The joints were tested by a shear test, macrostructure and scanning electron microscope (SEM) inspection. The design of the experiments (DOE) method was used to analysis the effect of the process parameters on the joint shear force. The DOE optimized the shear force of the joint with a maximum value of 1565 N at 177.5°C 4bar and 3.5min. The SEM examination indicated that the joining mechanism occurred by re-solidified the PA through the internal surface of the aluminum hole.

1 June 2022 in International Journal of Applied Mechanics and Engineering
Verified
Journal Article
Open access
PDF file
MSMohammed Helan Sar
Mohammed Helan Sar
MRMunaf Hashim Ridha
Munaf Hashim Ridha
IHImad M. Husain
Imad M. Husain
OBOsamah Sabah Barrak
Osamah Sabah Barrak
SHSabah Khammass Hussein
Sabah Khammass Hussein
The resistance spot welding (RSW) method was used to join aluminum alloy AA 1050 and copper alloy UNS C50100 sheets. Mechanical properties of the joints were examined. The influence of welding process parameters on tensile shear force of the joints was discussed. The design of experiments (DOE) method was used to analyze the influence of welding parameters on the mechanical properties of the joints. Three RSW parameters were used: welding current, squeeze time, and welding time. The results showed that the joint shear stress increased with increasing the welding current until a value of 12000 Amp. Then the shear stress decreased. The tensile shear stress increased with increasing the welding and squeeze time. As a consequence, it can be possible to weld copper with aluminum by RSW.