Marwan T. Mezher

Mr. Marwan T. Mezher

Universidade de Vigo, Vigo, Galicia, Spain
orcid

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
6 May 2024 in Materials
Verified
Journal Article
Open access
PDF file
Marwan T. MezherMarwan T. Mezher
Marwan T. Mezher
Alejandro PereiraAlejandro Pereira
Alejandro Pereira
Tomasz TrzepiecińskiTomasz Trzepieciński
Tomasz Trzepieciński
JAJorge Marcos Acevedo
Jorge Marcos Acevedo
The automobile industry relies primarily on spot welding operations, particularly resistance spot welding (RSW). The performance and durability of the resistance spot-welded joints are significantly impacted by the welding quality outputs, such as the shear force, nugget diameter, failure mode, and the hardness of the welded joints. In light of this, the present study sought to determine how the aforementioned welding quality outputs of 0.5 and 1 mm thick austenitic stainless steel AISI 304 were affected by RSW parameters, such as welding current, welding time, pressure, holding time, squeezing time, and pulse welding. In order to guarantee precise evaluation and experimental analysis, it is essential that they are supported by a numerical model using an intelligent model. The primary objective of this research is to develop and enhance an intelligent model employing artificial neural network (ANN) models. This model aims to provide deeper knowledge of how the RSW parameters affect the quality of optimum joint behavior. The proposed neural network (NN) models were executed using different ANN structures with various training and transfer functions based on the feedforward backpropagation approach to find the optimal model. The performance of the ANN models was evaluated in accordance with validation metrics, like the mean squared error (MSE) and correlation coefficient (R2). Assessing the experimental findings revealed the maximum shear force and nugget diameter emerged to be 8.6 kN and 5.4 mm for the case of 1–1 mm, 3.298 kN and 4.1 mm for the case of 0.5–0.5 mm, and 4.031 kN and 4.9 mm for the case of 0.5–1 mm. Based on the results of the Pareto charts generated by the Minitab program, the most important parameter for the 1–1 mm case was the welding current; for the 0.5–0.5 mm case, it was pulse welding; and for the 0.5–1 mm case, it was holding time. When looking at the hardness results, it is clear that the nugget zone is much higher than the heat-affected zone (HZ) and base metal (BM) in all three cases. The ANN models showed that the one-output shear force model gave the best prediction, relating to the highest R and the lowest MSE compared to the one-output nugget diameter model and two-output structure. However, the Levenberg–Marquardt backpropagation (Trainlm) training function with the log sigmoid transfer function recorded the best prediction results of both ANN structures.

6 March 2024 in Metals
Verified
Journal Article
Open access
PDF file
Marwan T. MezherMarwan T. Mezher
Marwan T. Mezher
DIEGO CAROUDIEGO CAROU
DIEGO CAROU
Alejandro PereiraAlejandro Pereira
Alejandro Pereira
The resistance spot welding (RSW) process is still widely used to weld panels and bodies, particularly in the automotive, railroad, and aerospace industries. The purpose of this research is to examine how RSW factors such as welding current, welding pressure, welding time, holding time, squeezing time, and pulse welding affect the shear force, micro-hardness, and failure mode of spot welded titanium sheets (grade 2). Resistance spot welded joints of titanium sheets with similar and dissimilar thicknesses of 1–1 mm, 0.5–0.5 mm, and 1–0.5 mm were evaluated. The experimental conditions were arranged using the design of experiments (DOE). Moreover, artificial neural network (ANN) models were used. Different training and transfer functions were tested using the feed-forward backpropagation approach to find the optimal ANN model. According to the experimental results, the maximum shear force was 5.106, 4.234, and 4.421 kN for the 1–1, 0.5–0.5, and 1–0.5 mm cases, respectively. The hardness measurements showed noticeable improvement for the welded joints compared to the base metal. The findings revealed that the 0.5–0.5 mm case gives the highest nugget and heat-affected zone (HAZ) hardness compared to other cases. Moreover, different failure modes like pull-out nugget, interfacial, and partial failure between the pull-out nugget and interfacial failure were noticed. The ANN outcomes based on the mean squared error (MSE) and coefficient of determination (R2) as validation metrics demonstrated that using the Levenberg–Marquardt (Trainlm) training function with the log sigmoid transfer function (Logsig) gives the best prediction, where R2 and MSE values were 0.98433 and 0.01821, respectively.


1 July 2020 in IOP Conference Series: Materials Science and Engineering
Verified
Conference Paper
Open access
OBOsamah Sabah Barrak
Osamah Sabah Barrak
MSMursal Luaibi Saad
Mursal Luaibi Saad
Marwan T. MezherMarwan T. Mezher
Marwan T. Mezher
SHSabah Khammass Hussein
Sabah Khammass Hussein
MHMahmood Mohammed Hamzah
Mahmood Mohammed Hamzah
The objective of this work is using a hot press technique to join a hybrid structure of aluminum alloy AA6061-T6 sheet of 1mm thickness together with polyamide PA sheet of 2mm thickness. The aluminum alloy specimen was pre-holed with two holes of 5mm diameter. The joining process was carried out with a lap joint configuration. Three different process parameters of the joining process were used: temperature (164, 172 and180°C), pressure (4, 7 and 10 bar) and time (1, 2.5 and 4 min.). The joints were tested by a shear test, macrostructure and scanning electron microscope (SEM) inspection. The design of the experiments (DOE) method was used to analysis the effect of the process parameters on the joint shear force. The DOE optimized the shear force of the joint with a maximum value of 1565 N at 177.5°C 4bar and 3.5min. The SEM examination indicated that the joining mechanism occurred by re-solidified the PA through the internal surface of the aluminum hole.

15 July 2022 in Periodica Polytechnica Mechanical Engineering
Verified
Journal Article
Closed access
PDF file
Marwan T. MezherMarwan T. Mezher
Marwan T. Mezher
BKBéla Kovács
Béla Kovács
Incremental sheet forming (ISF) is an innovative cold forming operation and has enticed great interests owing to its flexibility and capability to manufacture various complex 3D shapes with low costs and minimum requirements. Single point incremental forming (SPIF) is the most popular type of ISF process and has high quality and less occurrence of defects for the formed products if the operating parameters are achieved and evaluated with high precision. In this study, the impact of tool diameter and forming angle on the forming force, thickness distribution, thinning ratio, effective plastic strain, forming depth and fracture behaviour was explored. AA1050 aluminium alloy and DC04 carbon steel were employed to produce a truncated cone in accordance with the SPIF process. A 3D finite element model was required to achieve a well-established investigation. The SPIF of a truncated cone numerical model was adopted to build a model with the same conditions as of the experimental work with aid of ANSYS software version 18 through using the workbench LS-DYNA model. The sheet metal modelling was carried out in accordance the Cowper Symonds power law hardening by taking the behaviour of the material as elastic–plastic, and the anisotropic properties were assumed to simulate the plasticity behaviour for two sheet metals. Results indicate that the DC04 carbon steel has a higher forming force, minimum thickness and lower thinning ratio compared with AA1050 aluminium alloy under the same operating conditions.

20 December 2024 in Materials
Verified
Journal Article
Open access
PDF file
Marwan T. MezherMarwan T. Mezher
Marwan T. Mezher
Alejandro PereiraAlejandro Pereira
Alejandro Pereira
Tomasz TrzepiecińskiTomasz Trzepieciński
Tomasz Trzepieciński
Resistance spot-welded joints are crucial parts in contemporary manufacturing technology due to their ubiquitous use in the automobile industry. The necessity of improving manufacturing efficiency and quality at an affordable cost requires deep knowledge of the resistance spot welding (RSW) process and the development of artificial neural network (ANN)- and machine learning (ML)-based modelling techniques, apt for providing essential tools for design, planning, and incorporation in the welding process. Tensile shear force and nugget diameter are the most crucial outputs for evaluating the quality of a resistance spot-welded specimen. This study uses ML and ANN models to predict shear force and nugget diameter responses to RSW parameters. The RSW analysis was executed on similar and dissimilar AISI 304 and grade 2 titanium alloy joints with equal and unequal thicknesses. The input parameters included welding current, pressure, welding duration, squeezing time, holding time, pulse welding, and sheet thickness. Linear regression, Decision tree, Support vector machine (SVM), Random forest (RF), Gradient-boosting, CatBoost, K-Nearest Neighbour (KNN), Ridge, Lasso, and ElasticNet machine learning algorithms, along with two different structures of Multilayer Perceptron, were utilized for studying the impact of the RSW parameters on the shear force and nugget diameter. Different validation metrics were applied to assess each model’s quality. Two equations were developed to determine the shear force and nugget diameter based on the investigation parameters. The current research also presents a prediction of the Relative Importance (RI) of RSW factors. Shear force and nugget diameter predictions were examined using SHapley (SHAP) Additive Explanations for the first time in the RSW field. Trainbr as the training function and Logsig as the transfer function delivered the best ANN model for predicting shear force in a one-output structure. Trainrp with Tansig made the most accurate predictions for nugget diameter in a one-output structure and for shear force and diameter in a two-output structure. Depending on validation metrics, the Random forest model outperformed the other ML algorithms in predicting shear force or nugget diameter in a one-output model, while the Decision tree model gave the best prediction using a two-output structure. Linear regression made the worst ML predictions for shear force, while ElasticNet made the worst nugget diameter forecasts in a one-output model. However, in two-output models, Lasso made the worst predictions.