Lithium-ion batteries (LiBs) are a proven technology for energy storage systems, mobile electronics, power tools, aerospace, automotive and maritime applications. LiBs have attracted interest from academia and industry due to their high power and energy densities compared to other battery technologies. Despite the extensive usage of LiBs, there is a substantial fire risk associated with their use which is a concern, especially when utilised in electric vehicles, aeroplanes, and submarines. This review presents LiB hazards, techniques for mitigating risks, the suppression of LiB fires and identification of shortcomings for future improvement. Water is identified as an efficient cooling and suppressing agent and water mist is considered the most promising technique to extinguish LiB fires. In the initial stages, the present review covers some relevant information regarding the material constitution and configuration of the cell assemblies, and phenomenological evolution of the thermal runaway reactions, which in turn can potentially lead to flaming combustion of cells and battery assemblies. This is followed by short descriptions of various active fire control agents to suppress fires involving LiBs in general, and water as a superior extinguishing medium in particular. In the latter parts of the review, the phenomena associated with water mist suppression of LiB fires are comprehensively reviewed.
Fire is one of the most undesirable events onboard a ship. The engine room is one of the most critical spaces in the ship in terms of fire protection, as it includes machinery, hydrocarbon fuel systems, and different electrical equipment. With the phasing out of Halon 1301 as a fire suppressant over recent decades, there has been an intensive effort to explore the efficacy of water-mist spray in mitigating fires within machinery spaces. This exploration entails a comprehensive investigation through experimental and simulation studies aimed at identifying suppression mechanisms and evaluating their effectiveness. While experimental setups typically encompass measurements of gas temperature, thermal radiation heat flux, oxygen concentration, and fire extinction time, limited attention has been paid to quantifying the heat release rate (HRR), a crucial indicator of fire magnitude. Furthermore, research into shielded fire scenarios remains sparse, despite their significance in maritime fire dynamics. Addressing shielded fires with water mist proves particularly challenging due to the potential obstruction impeding the direct interaction between the fire source and the water droplets. In the existing literature, most of the computational fluid dynamics (CFD) modelling of fires and suppression was performed using a Fire Dynamics Simulator (FDS). Alternate studies were performed using FireFOAM. and very few employed FLUENT and other analogous software codes. In the majority of reported computational studies, the determination of HRR was typically relied upon for its calculation derived from the measured data of fuel mass loss rate. Moreover, certain studies were undertaken for numerical simulations without conducting thorough model validation, either by omitting validation altogether or solely validating against dry fire experiments (i.e., without water-mist suppression). This critical review of the literature has identified several notable research gaps in the context of extinguishing hydrocarbon fires utilising water-mist spray, warranting further investigations. Additionally, this review paper highlights recent advancements in both experimental and numerical investigations pertaining to the efficacy of water-mist fire-suppression systems in enclosed spaces regarding hydrocarbon fires.
A numerical investigation has been conducted to analyse the effect of wind on the vertical spread of fire through a front opening in a building’s external walls. The study utilises a building geometry established from previous experimental work conducted by the National Research Council of Canada (NRCC). A horizontal projection or a vertical spandrel is introduced above the opening of the compartment of fire origin. The purpose of the projection or spandrel is to inhibit the vertical spread of the fire, following the relevant requirements in the Australian National Construction Code (NCC). A computational fluid dynamics (CFD) package for fire-driven fluid flow, namely the Fire Dynamics Simulator (FDS), is employed to simulate the fire behaviour. The FDS model is validated against the NRCC’s experimental results, and a good agreement is achieved. Winds from three horizontal directions (front wind is normal to the opening, side wind is parallel to the opening, and back wind is from behind the building) have been investigated, with speeds ranging up to 10 m/s for each wind direction. Front wind speeds below 1 m/s are found to slightly enhance the vertical spread of the fire, while speeds exceeding 1 m/s are inclined to promote horizontal spread. The impact of side wind on the vertical fire spread was also found to vary with wind speed. The increase in the speed of back wind influences flame buoyancy, resulting in an augmented vertical fire spread. Furthermore, the numerical results reveal that a vertical spandrel of 1100 mm height is less effective in preventing vertical fire spread through openings, compared to a 1100 mm deep horizontal projection. The study suggests that the fire safety design in reducing the hazard of vertical fire spread through openings in buildings’ external walls could be further improved if the effect of wind is considered.