Although electric vehicles (EVs) are becoming a promising alternative for ground transportation, the issue of limited battery energy hinders its market penetration. Accurate prediction of electrical energy consumption along a given route would significantly relieve drivers’ anxieties and build their confidence in EVs. A high-fidelity energy estimation relies on an accurate velocity forecast. To this end, this article proposes a novel hybrid deterministic-stochastic methodology that utilizes inputs encompassing the route information, the driver’s characteristics, and the traffic flow’s uncertainties to predict the EV’s future velocity profile and energy consumption. The method comprises two components: a deterministic machine-learning-based transformer network and a stochastic Markov-chain Monte Carlo (MCMC) algorithm. Real-world EV data collected in four routes of different lengths and features are used to evaluate the method. The results demonstrate the enhanced performance of the approach in both velocity prediction and energy consumption estimation, compared to two popular baseline algorithms.
18 April 2023 in IEEE Transactions on Intelligent Vehicles
The uncertainties of driver's behavior seriously affect road safety and bring significant challenges to the human-machine cooperative control. This paper proposes a human-machine shared control framework considering driver's time-varying characteristics to improve the co-driving cooperation performance. Firstly, the driving intention is introduced to describe the driver's involvement level through using Gauss-Bernoulli restricted Boltzmann machine method. And the index of driving ability is proposed to evaluate driver skills based on path-tracking errors. Then, a novel human-machine authority allocation strategy is designed by combining the two driving behavior characteristics and used to construct the driver-vehicle interaction system. Subsequently, a T-S fuzzy robust state-feedback shared control system is developed considering time-varying driver behaviors and vehicle states. Finally, the proposed shared steering system is validated by the driver-in-the-loop test bench. The results show that the proposed control method can reduce human-machine conflicts and has obvious superiority in improving performance of driving comfort, path tracking, and vehicle stability for the co-driving vehicles.
16 February 2022 in IEEE/ASME Transactions on Mechatronics
Traditional automated vehicle path-tracking algorithms require plant models to derive the respective control laws. However, the accurate vehicle model is difficult to obtain due to the complex tire-road interaction, time-varying parameters, and unknown disturbances. Consequently, data-driven controllers, which do not rely on a predefined plant model, have become increasingly popular. Notably, the model-free control (MFC), which expresses the derivatives of a controlled output as the sums of an amplified control input and an offset term, provides a straightforward solution to ground vehicle path tracking. Despite its ease of use, the control gain tuning of MFC remains largely a trial-and-error process, which could be both painstaking and poorly performing. Existing adaptive gain-tuning methods either rely on the command at the last step to iteratively update the control gain at the current step, or try to simultaneously identify the control gain and the offset term. However, they could yield chattering or unbounded control gains. To provide a new perspective for the MFC control gain tuning while improving MFC's control performance, we integrate MFC with the extremum-seeking control (ESC). ESC updates the control gain of MFC in real time to progressively enhance the control performance of MFC. Simulink–CarSim simulations and scaled car field tests demonstrate the effectiveness of the proposed extremum-seeking-based adaptive model-free controller.
25 January 2022 in IEEE Transactions on Intelligent Vehicles
Backlash phenomena have haunted control engineers for ages. Concerning the ground vehicle path-tracking control system design, the steering systems backlash attribute is often overlooked. If not properly compensated, the backlash nonlinearity tends to provoke unfavorable consequences including erroneous positioning of the road-wheel steering angle, response chattering, limit-cycle-like oscillations, and delays. This paper pioneers to employ an adaptive inverse controller to offset the dynamics of the steering systems backlash. Overall, the path-following objective is accomplished via a novel trio-loop control architecture, which decomposes the tracking objectives into kinematic, vehicular lateral dynamics, and steering backlash compensation sub-levels. All adaptive control laws are robustified by means of -modifications. Hardware-in-the-loop experimental results are presented to demonstrate the superiorities of the proposed solution.
29 April 2020 in IEEE Transactions on Intelligent Transportation Systems
Trajectory following of autonomous vehicle is a challenging task because of the multiple constraints imposed on the plant. Therefore, Model Predictive Control (MPC) is becoming prevail in vehicle motion control as it can explicitly handle system constraints. However, MPC, grounded in real-time iterative optimization, entails a considerable computational burden for current electronic control units. To mitigate the MPC execution load, a popular strategy is to linearize the original (nonlinear) system around the current working point and then design a Linear Time-Varying MPC (LTVMPC). Nevertheless, the successive linearization introduces extra modeling errors, which may impair the control performance. Indeed, if the plant model satisfies the `differential flatness' condition, it can be exactly linearized to the Brunovsky's canonical form. In contrast to the LTV model, this newly appeared linear form reserves all the nonlinear features of the native plant model. Based on this equivalent linear system, a Flatness Model Predictive Controller (FMPC) can be formulated. FMPC on the one hand, improves the control performance over an LTVMPC because it avoids extra modeling errors from the local linearization. On the other hand, it entails a much lighter computational load versus a nonlinear MPC thanks to its linear nature. Real-time simulations conducted on a hardware-in-the-loop system indicate the advantages of the proposed FMPC in autonomous vehicle trajectory following.
Cellulose degradation is one of the major bottlenecks of a consolidated bioprocess that employs cellulolytic bacterial cells as catalysts to produce biofuels from cellulosic biomass. In this study, we investigated the spatial and temporal dynamics of cellulose degradation byCaldicellulosiruptfor obsidiansis, which does not produce cellulosomes, andClostridium thermocellum, which does produce cellulosomes. Results showed that the degradation of either regenerated or natural cellulose was synchronized with biofilm formation, a process characterized by the formation and fusion of numerous crater-like depressions on the cellulose surface. In addition, the dynamics of biofilm formation were similar in both bacteria, regardless of cellulosome production. Only the areas of cellulose surface colonized by microbes were significantly degraded, highlighting the essential role of the cellulolytic biofilm in cellulose utilization. After initial attachment, the microbial biofilm structure remained thin, uniform and dense throughout the experiment. A cellular automaton model, constructed under the assumption that the attached cells divide and produce daughter cells that contribute to the hydrolysis of the adjacent cellulose, can largely simulate the observed process of biofilm formation and cellulose degradation. This study presents a model, based on direct observation, correlating cellulolytic biofilm formation with cellulose degradation.