Ammonia (NH3) is not only expected to be used as a hydrogen energy carrier but also expected to become a carbon-free fuel. Methane (CH4) can be used as a combustion enhancer for improving the combustion intensity of NH3. In addition, it is important to understand the flame characteristics of NH3–air at elevated pressures and temperatures. The laminar flame speed of NH3–CH4–air is numerically investigated, where the mole fraction of CH4 ranges from 0 to 50% in binary fuels and the pressure and initial temperature are up to 10 atm and 1000 K, respectively. The calculated value from the Okafor mechanism is in excellent agreement with experimental data. The CH4 in the fuel affects the flame speed by changing the main species of free radicals in the flame; the high pressure not only increases the rate-limiting reaction rate in the flame but also reduces the amount of H, O, and OH radicals in the flame, so as to restrain the propagation of the flame. At a higher initial temperature, the faster flame speed is mainly due to the higher adiabatic flame temperature. The laminar flame speed correlation equation has a consistent trend with the simulation results, though with a slight underestimation at higher pressures and temperatures. It is a more effective way to calculate the laminar flame speeds of NH3–air for a given pressure and temperature.
The effects (chemical, thermal, transport, and radiative) of CO2 added to the fuel side and oxidizer side on the flame temperature and the position of the flame front in a one-dimensional laminar counterflow diffusion flame of methane/N2/O2 were studied. Overall CO2 resulted in a decrease in flame temperature whether on the fuel side or on the oxidizer side, with the negative effect being more obvious on the latter side. The prominent effects of CO2 on the flame temperature were derived from its thermal properties on the fuel side and its radiative properties on the oxidizer side. The results also highlighted the differences in the four effects of CO2 on the position of the flame front on different sides. In addition, an analysis of OH and H radicals and the heat release rate of the main reactions illustrated how CO2 affects the flame temperature.
Green ammonia has become an increasingly popular fuel in recent years because of its combustion process without carbon oxide release. Adding ammonia to methane fuel for co-combustion has become one of the important research topics in the current combustion field. In the present study, the CH4/NH3/Air counterflow diffusion flame was taken as the research object, and Chemkin-2019 R3 software was used to explore and analyze the flame extinction limit and chemical kinetics characteristics under different ammonia mixing ratios, initial pressures, and air preheating temperatures. It was obtained that the flame extinction stretch rate was decreased by increasing the NH3 mole fraction in the CH4/NH3 mixed fuel. The increase in pressure or air preheating temperature would accelerate the chemical reaction rate of each component in the combustion process, increase the flame extinction limit, and counteract the “stretching effect” of the flame, thus restraining the flame extinguishing phenomenon. The results of a path analysis show that the formation and consumption of OH had an important influence on flame extinction in the chain reaction. The net reaction rate of OH increases with increasing the initial pressure or air preheating temperature, which leads to an increase in flame intensity, combustion stability, and the extinction limit. Furthermore, the function curve between the reaction influences the RIF factor and the stretch rate of the first-to-ten reactions, affected by the heat release of flame combustion, was drawn and quantitatively analyzed. Eventually, a sensitivity analysis of the flame under different working conditions was completed, which found that promoting the forward reaction R39 H + O2<=>O + OH also promotes the positive combustion as a whole when the flame was near extinction. The sensitivity coefficient of R39 in the CH4/NH3/Air flame increases with the growing initial pressure. The increasing air preheating temperature was capable of switching the reaction of R248 NH2 + OH<=>NH + H2O in the CH4/NH3/Air flame from an inhibiting reaction to a promoting reaction, while decreasing the sensitivity coefficient of inhibiting the forward reaction R10 O + CH3<=>H + CH2O, R88 OH + HO2<=>O2 + H2O, and R271 H + NO + M<=>HNO + M. Thus, the inhibition effect of flame extinction was weakened, and the positive progress of combustion was promoted.
To study the laminar premixed flame characteristics of methane under an O2/CO2 atmosphere in high pressure, a new simplified chemical mechanism (44 steps and 19 species) was extracted from the GRI-Mech 3.0 mechanism. The sensitivity coefficient analysis method is used to retain the elementary reactions that have great influence on the target parameters and remove other secondary elementary reactions. Meanwhile, the closeness of the simplified mechanism initially obtained was verified. The results of the laminar burning velocities, the distribution of the main species, and the ignition delay time were compared between the two mechanisms for the premixed flame and the ignition process. Overall, the simplified mechanisms performed fairly well over a wide range of pressure, equivalence ratio, and fuel mixture composition.
A comprehensive numerical investigation of the uncoupled chemical, thermal, and transport effects of CO2 on the temperature of CH4/O2 counterflow diffusion flame under high pressure up to 5 atm was conducted. Three pairs of artificial species were introduced to distinguish the chemical effect, thermal effect, and the transport effect of CO2 on the flame temperature. The numerical results showed that both the chemical effect and the thermal effect of the CO2 dilution in the oxidizer side can decrease the flame temperature significantly, while the transport effect of CO2 can only slightly increase the flame temperature and can even be ignored. The reduction value of the temperature caused by the chemical effect of CO2 grows linearly, while that caused by the thermal effect increases exponentially. The and are defined to explain the temperature reduction percentage due to the chemical effect and the thermal effect of CO2 in the total temperature reduction caused by CO2 dilution, respectively. The decreases with the increase of the pressure, the strain rate, and the CO2 dilution ratio, while the behaves in the opposite manner. In the above conditions, the chemical effect plays a dominant role on the flame temperature reduction.