Biosorbents are an alternative pollutant adsorbent, usually sourced from waste biomass and requiring little to no treatment. This makes them cheaper than conventional adsorbents. In this paper, green pea (Pisum sativum) haulm was used as a biosorbent for the adsorption of methylene blue dye. The potential application of pea haulm as a biosorbent has not been investigated before. Characterisation using scanning electron microscopy, infrared spectroscopy and thermal gravitational analysis showed the surface to be coarse, detected functional groups important for adsorption and identified the composition of key biomass components. The effects of particle size, contact time, agitation, dosage, solution pH, temperature and initial dye concentration on the removal of MB by pea haulm were investigated. Using the data from these studies, the best fitting kinetic and isotherm models were found and the thermodynamic properties were identified. The maximum theoretical adsorption capacity was 167 mg/g, which was relatively high compared to other recent biosorbent studies. The pseudo-second-order adsorption kinetic and Freundlich adsorption isotherm models were the best fitting models. The biosorption process was exothermic and spontaneous at low temperatures. It was concluded that pea haulm was an effective adsorbent of methylene blue and could perhaps find application in wastewater treatment.
Post-consumer plastic management, otherwise termed waste plastic (WP) management, is a great challenge in today’s world, mainly because of its characteristic biodegradation properties. The quantity of waste plastics correspondingly increases with the increase in demand for plastic use. Research has shown that this demand increases yearly. Most of these waste plastics include high-density polyethylene (HDPE), low-density polyethylene (LDPE), polyethylene terephthalate (PET) and polystyrene (PS). Potentially, these wastes are a wealth, and studies have explored that pyrolysis is a reputable mechanism to accomplish this. In this critical review, an extensive investigation on waste plastics thermal pyrolysis (WPTP) is carried out. The factors that affect the product’s yield and selectivity are discussed, and a comparative quality guarantee of WPTP is examined. This paper presents an assurance into the current findings of WPTP and reveals some common gaps and misconceptions surrounding this field, which are recommendable towards the support of further research work. The significant role of co-pyrolysis of plastics with biomass in this field is also emphasised, and a glimpse into the influence of mixed waste plastics in pyrolysis is presented.
With the increase in demand for plastic use, waste plastic (WP) management remains a challenge in the contemporary world due to the lack of sustainable efforts to tackle it. The increment in WPs is proportional to man’s demand and use of plastics, and these come along with environmental challenges. This increase in WPs, and the resulting environmental consequences are mainly due to the characteristic biodegradation properties of plastics. Landfilling, pollution, groundwater contamination, incineration, and blockage of drainages are common environmental challenges associated with WPs. The bulk of these WPs constitutes polyethene (PE), polyethene terephthalate (PET) and polystyrene (PS). Pyrolysis is an eco-friendly thermo-chemical waste plastic treatment solution for valuable product recovery, preferred over landfilling and incineration solutions. In this extensive review, a critical investigation on waste plastic catalytic pyrolysis (WPCP) is performed, including catalyst and non-catalyst applications to sustainably tackle WP management. Current catalysis techniques are revealed, and some comparisons are made where necessary. Common pyrolytic products and common shortcomings and errors related to WP catalysis were also identified. The benefits of catalysts and their applications to augment and optimise thermal pyrolysis are emphasised. With all these findings, and more, this paper provides reassurance on the significance of catalysis to industrial-scale applications and products and supports related WPCP research work concerning the environment and other beneficiaries.
This paper examines a novel approach to activated carbon (AC) production that uses pea waste (PW) and to what extent it is economically competitive with current production methods. Additionally, the outcome is to provide a detailed economic analysis to understand whether this process is viable. The focus of this production route and the economic analysis will be on a United Kingdom (UK) basis. The plant will be located within the north UK to minimise storage and transportation costs. It also has extensive links to other clusters of nearby industries that would produce from this process in air pollution control or wastewater treatments. The overall production process is detailed, and detailed equipment specifications, including the sizing of equipment and utility requirements, were also given. Material balance calculations are carried out to assess the performance and improve process design. An economic analysis is performed to study the potential of biomass-to-AC conversion costs and commercialisation viability. The project’s investment is about £100 million. The cost of the plant can be recovered from year 3 (mid) for the 20-year life of the plant. The Net Present Value (NPV) is based on cumulative cash flow. The NPV is calculated as GBP 4,476,137,297.79 for 2020, and the associated internal rate of return (IRR) and the return on investment (ROI) for the project are 55% and 52%, respectively.
The production of energy and chemicals from waste biomass is an attractive alternative by comparison with first-generation biofuels and fossil feedstocks. This paper investigates oil extraction from spent coffee grounds (SCG) by means of an advanced microwave process and compares this with a conventional Soxhlet extraction (SE) method. Microwave-assisted oil extraction (MAE) from SCG was performed over different durations, varying solvent volumes and extraction temperatures. It was found that each of these parameters had an effect on the process, with the largest yield being over 11.54 wt%, oil extracted in 10 min using 160 mL of hexane at 95 °C. In 10 min, MAE was successful in extracting more oil than SE. MAE achieved a 24-fold decrease in duration for the extraction compared with SE and used less solvent per gram of oil produced. It is proposed that a certain moisture content in the SCG would be beneficial to the extraction process and might it also play a role in the heating process. The extracted oil can be converted into biodiesel and biochemicals leaving the remaining solids suitable for processing into bioethanol, fertiliser, adsorptive material and fuel pellets. Graphic
Recycling of waste plastics has become vital due to the threat to the environment the huge piles of those wastes represent, with research revealing High-Density Polyethylene (HDPEs) as the most dominant waste plastics. Because of their dominance and significant environmental impact, this paper reports the economic potential of recycling HDPE waste plastic into liquid fuels via pyrolysis. A risk and benefit assessment are presented to highlight whether the process has reasonable potential prior to the analysis of its corresponding finances. Aspen HYSYS simulation models were used as the basis for the analysis. From this, preliminary cost estimations for the net present value (NPV) of the process, its economic viability, were determined. It is shown that 100 kg/h of waste is not financially sustainable. Retailing the fuel product at a competitive price of £60/barrel would ultimately bankrupt the business. This is a consequence of the extremely high production cost of £198.40/barrel inducing the complete absence of profitability. Furthermore, the operating expenditure is found to be the root cause of the consequential financial decline, totalling £1.46 million per annum. The two most detrimental expenditures for the production cost of the pyrolysis oils were the wages of the skilled operating labour and higher utility fees incurred by the extreme temperature conditions. In addition, an unrealistically optimistic sale price of £300/barrel was also applied to ascertain a positive economic incentive. Even with the increased retail price, the process’ profits are negligible and further highlight the detrimental effect of the undesirably high operational expenditures, once more signifying that the process should not commence in its current state. However, executing such a project in developing countries such as Sierra Leone, Senegal, or Kenya where utilities and manpower, among other operational components, are cheaper, is believed to complement the immense opportunity underlying pyrolysis oil production regarding production quantity and quality.