Shallow bathymetry is important for ocean exploration, and the development of high-precision bathymetry inversion methods, especially for shallow waters with poor quality, is a major research aim. Synthetic aperture radar (SAR) image data benefit from a wide coverage, high measurement density, rapidity, and low consumption but are limited by low accuracy. Alternatively, multibeam data have low coverage and are difficult to obtain but have a high measurement accuracy. In this paper, taking advantage of the complementary properties, we use SAR image data as the content map and multibeam images as the migrated style map, applying the VGG19 neural network (optimizing the loss function formula) for bathymetric inversion. The model was universal and highly accurate for bathymetric inversion of shallow marine areas, such as turbid water in Taiwan. There was a strong correlation between bathymetric inversion data and measured data (R² = 0.8822; RMSE = 1.86 m). The relative error was refined by 9.22% over those of previous studies. Values for different bathymetric regions were extremely correlated in the region of 20–40 m. The newly developed approach is highly accurate over 20 m in the open ocean, providing an efficient, precise shallow bathymetry inversion method for complex hydrographic conditions.

Marine researchers rely heavily on ocean sound velocity, a crucial hydroacoustic environmental metric that exhibits large geographical and temporal changes. Nowadays, spatio-temporal series prediction algorithms are emerging, but their prediction accuracy requires improvement. Moreover, in terms of ocean sound speed, most of these models predict an ocean sound speed profile (SSP) at a single coordinate position, and only a few predict multi-spatial-scale SSPs. Hence, this paper proposes a new data-driven method called STA-Conv-LSTM that combines convolutional long short-term memory (Conv-LSTM) and spatio-temporal attention (STA) to predict SSPs. We used a 234-month dataset of monthly mean sound speeds in the eastern Pacific Ocean from January 2004 to June 2023 to train the prediction model. We found that using 24 months of SSPs as the inputs to predict the SSPs of the following month yielded the highest accuracy. The results demonstrate that STA-Conv-LSTM can achieve predictions with an accuracy of more than 95% for both single-point and three-dimensional scenarios. We compared it against recurrent neural network, LSTM, and Conv-LSTM models with optimal parameter settings to demonstrate the model’s superiority. With a fitting accuracy of 95.12% and the lowest root-mean-squared error of 0.8978, STA-Conv-LSTM clearly outperformed the competition with respect to prediction accuracy and stability. This model not only predicts SSPs well but also will improve the spatial and temporal forecasts of other marine environmental factors.

The multibeam echo sounder (MBES) is a key tool for acquiring high-precision seabed topographic data. However, measurement gaps resulting from its swath-based measurement mode are prevalent, severely compromising the completeness of seabed terrain modeling. To address this issue, this study first categorizes multibeam data gaps into two data degradation patterns with clear hydrographic survey backgrounds: “random degradation” and “rule-based degradation.” Based on this categorization, a highly realistic training dataset that closely matches actual conditions is constructed. To improve the reconstruction accuracy and topographic fidelity, a novel multibeam echo sounder data reconstruction model, the MBES-DDPM, is proposed. Based on the denoising diffusion probabilistic model (DDPM) framework, this model innovatively incorporates gravity anomaly data as prior knowledge. Then, with a designed multisource data fusion guidance mechanism, macro-topographic structural constraints are injected during the diffusion process. Furthermore, a targeted quantitative and qualitative evaluation system is established. The experimental results show that compared with the baseline methods, the MBES-DDPM achieves the best performance across various complex scenarios. Its restored results exhibit an average reduction in root mean square error of at least 34.21% and an average increase in peak signal-to-noise ratio of more than 3.71 dB. Furthermore, it achieves the highest reconstruction fidelity in teams of the terrain slope accuracy metrics. Thus, this research provides a new and reliable solution for accurately restoring large-scale MBES data.

Submarine sand waves are widespread on shallow continental shelves. Their complex morphology and potential mobility create challenges for engineering surveys, navigation safety, and seabed stability assessment. Multibeam surveys provide accurate bathymetry but are costly and spatially limited, whereas satellite-based methods offer broader coverage but remain challenging in complex sand wave fields. Here, we propose a spatial-sequential 2DCNN–LSTM model for retrieving submarine sand wave bathymetry from Sentinel-2 surface reflectance imagery. The model represents each target point as a sequence of local multispectral image patches, allowing convolutional layers to extract two-dimensional textural features and LSTM layers to learn profile-scale rhythmic continuity associated with sand wave morphology. The model was trained using multibeam bathymetry and applied to a large extrapolation area of approximately 4000 km² on the Taiwan Banks. Evaluation on the large extrapolated area against in situ bathymetric data achieved a root mean square error (RMSE) of 3.78 m, a mean absolute error (MAE) of 2.99 m, and a mean relative error (MRE) of 9.1%. The results demonstrate that sand wave-induced optical textures can provide useful information for broad-scale bathymetric reconstruction, although model performance remains dependent on image texture visibility controlled by hydrodynamic, illumination, and atmospheric conditions. This framework offers a cost-effective approach for satellite-based monitoring of large submarine sand wave fields, providing a new perspective for engineering applications.