The transition to oxy-fuel combustion power cycles is a prospective way to decrease carbon dioxide emissions into the atmosphere from the energy sector. To identify which technology has the highest efficiency and the lowest emission level, a thermodynamic analysis of the semiclosed oxy-fuel combustion combined cycle (SCOC-CC), the E-MATIANT cycle, and the Allam cycle was carried out. The modeling methodology has been described in detail, including the approaches to defining the working fluid properties, the mathematical models of the air separation unit, and the cooled gas turbine cycles’ calculation algorithms. The gas turbine inlet parameters were optimized using the developed modeling methodology for the three oxy-fuel combustion power cycles with CO2 recirculation in the inlet temperature at a range of 1000 to 1700 °C. The effect of the coolant flow precooling was evaluated. It was found that a decrease in the coolant temperature could lead to an increase of the net efficiency up to 3.2% for the SCOC-CC cycle and up to 0.8% for the E-MATIANT cycle. The final comparison showed that the Allam cycle’s net efficiency is 5.6% higher compared to the SCOC-CC cycle, and 11.5% higher compared with the E-MATIANT cycle.
Our paper analyzes the issue of managing structural and technological modernization of the Russian power utilities industry based on the basic criteria of sustainable development. We have chosen coal-fired generation and its defining technologies as the main subject for our analysis. Key points of the Russian power utilities development strategy that has been drawn up to 2030 are compared against the basic principles of sustainable development. Moreover, a mathematical economic model is proposed to justify the choice of coal-fired power plant technology from the standpoint of economic, social, and environmental efficiency.
30 September 2018 in Entrepreneurship and Sustainability Issues
The transition to the use of supercritical carbon dioxide as a working fluid for power generation units will significantly reduce the equipment′s overall dimensions while increasing fuel efficiency and environmental safety. Structural and parametric optimization of S–CO2 nuclear power plants was carried out to ensure the maximum efficiency of electricity production. Based on the results of mathematical modeling, it was found that the transition to a carbon dioxide working fluid for the nuclear power plant with the BREST–OD–300 reactor leads to an increase of efficiency from 39.8 to 43.1%. Nuclear power plant transition from the Rankine water cycle to the carbon dioxide Brayton cycle with recompression is reasonable at a working fluid temperature above 455 °C due to the carbon dioxide cycle′s more effective regeneration system.
The Rankine cycle is widely used for electricity production. Significant weight and size characteristics of the power equipment working on superheated steam are the main disadvantages of such power plants. The transition to supercritical carbon dioxide (S-CO2) working fluid is a promising way to achieve a significant reduction in equipment metal consumption and to increase energy efficiency. This paper presents the results of thermodynamic analysis of S-CO2 thermal power plants (TPPs) utilizing the heat of combustion products of an energy boiler. It was found that the net efficiency of the developed S-CO2 TPP with a pulverized coal-fired boiler reached 49.2% at an initial temperature of 780 °C, which was 2% higher compared to the efficiency level of steam turbine power plants (STPPs) at a similar turbine inlet temperature.
The paper is concerned with the problem of the development of high-temperature steam turbine power plants with ultra-supercritical (USC) initial parameters. One of the main disadvantages of the USC power unit’s creation is high price due to the application of expensive heat-resistant materials for boiler, live and reheat steam pipelines in turbines. To solve this problem, the following technical improvements to reduce the application of the heat-resistant materials and equipment metal consumption are proposed: horizontal boiler layout, high temperature steam turbine with a cooling system, oxy-hydrogen combustion chambers, and two-tier low-pressure turbine. The influence of the above-mentioned solutions on the high-temperature steam turbine power plant efficiency was estimated using thermodynamic analysis. The promising equipment design was developed based on the results of numerical and experimental research. The analysis of the proposed solutions’ influence upon the economic parameters of a high-temperature power facility was investigated based on the developed cost analysis model, which included the equipment metal and manufacturing expenses. The introduction of all the mentioned cost reduction methods led to a decrease in the facility’s price by RUB 10.5 billion or 15%. The discounted payback period was reduced from 27.5 to 10 years and the net present value increased by RUB 9.6 billion or 16 times.