This work presents a novel hydrothermally aided sol-gel method for preparation of mesoporous silica nanoparticles (MSNs) with a narrow particle size distribution and varied pore sizes. The method was carried out in alkaline media in presence of polyethylene glycol (PEG) and cetyltrimethylammonium chloride (CTAC) as dual templates and permitted the synthesis of spherical mesoporous silica with a high surface area (1011.42 m²/g). The MSN materials were characterized by FTIR, Thermogravimetric (TG), Nitrogen adsorption and desorption and Field emission scanning electron microscopic analysis (FESEM). The materials feasibility as solid phase adsorbent has been demonstrated using cationic dyes; Rhodamine B (RB) and methylene blue (MB) as models. Due to the large surface area and variable pore width, the adsorption behaviors toward cationic dyes showed outstanding removal efficiency and a rapid sorption rate. The adsorption isotherms of RB and MB were well-fitted to the Langmuir and Freundlich models, while the kinetic behaviours adhered closely to the pseudo-second-order pattern. The maximum adsorption capacities were determined to be 256 mg/g for MB and 110.3 mg/g for RB. The findings suggest that MSNs hold significant potential as solid-phase nanosorbents for the extraction and purification of dye pollutants, particularly in the analysis and treatment of effluents containing cationic dyes.

A downscaled solid phase (SPE) device applicable for sample preparation prior to ICP-MS monitoring, have been constructed making use of the lab on a chip concept. Standard photolithography and wet chemical etching were used to fabricate glass microfluidic devices accommodating three microchannels, each of them incorporating a defined section that could be packed with SPE materials; selective chelating resin. The microfluidic device was interfaced with the ICP-MS instrument throughout a low flow rate concentric nebuliser using a Teflon connector, and coupled with a flow injection manifold delivering samples and reagents via a manually operated splitting valve. The feasibility of the miniaturized prototype to perform SPE of trace metals was proved by analyzing trace metals, Cd, Co, and Ni, in seawater reference materials; CASS-2 and SLEW-1. The obtained result was in good agreement with the certified values. The device could be used as a remote miniaturized sample treatment for field work.

Aryl diazonium salt chemistry offers a robust and versatile approach for the modification of material surfaces via the covalent immobilization of reactive functional groups under mild conditions. In this study, this strategy was successfully applied to graft the chelating agent 4-(2-pyridylazo)resorcinol (PAR) onto Amberlite XAD-4 resin. Initially, 4-nitrobenzenediazonium tetrafluoroborate (NBDT) was covalently anchored onto the resin surface using hypophosphorous acid as a reducing catalyst to introduce aryl nitro groups. These nitro groups were subsequently reduced to aniline functionalities, enabling diazo coupling with PAR. The successful modification of the resin was confirmed by ATR-FTIR spectroscopy, thermogravimetric analysis (TGA), and X-ray photoelectron spectroscopy (XPS). The synthesized chelating resin exhibited sorption capacities of 0.152, 0.167, and 0.172 mM g⁻¹ for Co(II), Ni(II), and Cu(II), respectively. The functionalized resin was packed into standard SPE cartridges and employed as a selective sorbent for the extraction and preconcentration of trace metals from groundwater samples collected from Dhalamah Valley, Al-Madinah Al-Munawwarah, prior to quantification by inductively coupled plasma mass spectrometry (ICP-MS). These results demonstrate the effectiveness of rapid diazonium-based surface functionalization for the preparation of selective polymeric metal chelators suitable for the extraction of trace metals from complex groundwater matrices.

This study reports a facile synthesis for mesoporous silica nanoparticles (MSNs) chemically functionalized with a phenanthroline-2-carbaldehyde (PCA) chelating moiety and explore its potential as an efficient solid phase extraction (SPE) nano chelator for Pb, Cd, Ni, and Co ions from aqueous solutions. MSNs were prepared from a sodium silicate solution serving as a silica source and cetyltrimethylammonium chloride (CTAC) and polyethylene glycol (PEG) as structural directing agents, using a simple hydrothermally assisted sol-gel process. The PCA chelator was chemically anchored onto the MSN surfaces. This was done by straightforward transformation incorporation of an amino group via sialylation, followed by amide coupling. The obtained nano chelator was characterized using X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM), Fourier transform infrared (FTIR), thermogravimetric analysis (TGA), and Brunauer-Emmett-Teller (BET). The materials exhibited a rapid adsorption rate, and the equilibrium for the investigated heavy metals was achieved within 70 minutes. The ideal pH values for metal extraction were 5 for Cd and Co ions and 6.0 for Pb and Ni. The Langmuir model indicated the highest adsorption capacity of heavy metal ions in this order; Ni (132 mg/g), Co (130 mg/g), Pb (121 mg/g), and Cd (116 mg/g). The nano chelating resin demonstrated adequate applicability as a SPE sorbent to extract the targeted metal ion from wastewater reference material and wastewater real samples followed by quantification with inductively coupled plasma mass spectroscopy (ICPMS).

The accurate determination of trace metals in aqueous matrices necessitates robust sample preparation techniques that enable selective preconcentration of analytes while ensuring compatibility with subsequent instrumental analysis. Dispersive solid-phase extraction (d-SPE), a suspension-based variant of conventional solid-phase extraction (SPE), facilitates rapid sorbent–analyte interactions and enhances mass transfer efficiency through direct dispersion of the sorbent in the sample solution. This approach offers significant advantages over traditional column-based SPE, including faster extraction kinetics and greater operational simplicity. When supported by appropriately engineered sorbents, d-SPE exhibits considerable potential for the selective enrichment of trace metal analytes from complex aqueous matrices. In this work, a fibrous silica-based chelating material, DSA-KCC-1, was synthesized by grafting 3,5-Di-tert-butylsalicylaldehyde (DSA) onto aminopropyl-modified KCC-1. The dendritic KCC-1 scaffold enables fast dispersion and short diffusion pathways, while the immobilized phenolate–imine ligand introduces defined binding sites for transition-metal uptake. Characterization by FTIR, TGA, BET, FESEM/TEM, XRD, and elemental analysis confirmed the successfulness of functionalization and preservation of the fibrous mesostructured. Adsorption studies demonstrated chemisorption-driven interactions for Pb(II) and Co(II) from water, with Langmuir-type monolayer uptake and pseudo-second-order kinetic behavior. The nano-adsorbent exhibited a markedly higher affinity for Pb(II) than for Co(II), with maximum adsorption capacities of 99.73 and 66.26 mg g⁻¹, respectively. Integration of the DSA-KCC-1 nanosorbent into a d-SPE–ICP-OES workflow enabled the reliable determination of trace levels of the target ions, delivering low limits of detection, wide linear calibration ranges, and stable performance over repeated extraction cycles. Analysis of NIST CRM 1643d yielded results in good agreement with the certified values, while the method demonstrated high tolerance toward common coexisting ions. The combined structural features of the KCC-1 support and the Schiff-base ligand indicate the suitability of DSA-KCC-1 for d-SPE workflows and demonstrate the potential of this SPE format for selective preconcentration of trace metal ions in aqueous matrices.