This work presents a novel hydrothermally aided sol-gel method for preparation of mesoporous silica nanoparticles (MSNs) with a narrow particle size distribution and varied pore sizes. The method was carried out in alkaline media in presence of polyethylene glycol (PEG) and cetyltrimethylammonium chloride (CTAC) as dual templates and permitted the synthesis of spherical mesoporous silica with a high surface area (1011.42 m2/g). The MSN materials were characterized by FTIR, Thermogravimetric (TG), Nitrogen adsorption and desorption and Field emission scanning electron microscopic analysis (FESEM). The materials feasibility as solid phase adsorbent has been demonstrated using cationic dyes; Rhodamine B (RB) and methylene blue (MB) as models. Due to the large surface area and variable pore width, the adsorption behaviors toward cationic dyes showed outstanding removal efficiency and a rapid sorption rate. The adsorption isotherms of RB and MB were well-fitted to the Langmuir and Freundlich models, while the kinetic behaviours adhered closely to the pseudo-second-order pattern. The maximum adsorption capacities were determined to be 256 mg/g for MB and 110.3 mg/g for RB. The findings suggest that MSNs hold significant potential as solid-phase nanosorbents for the extraction and purification of dye pollutants, particularly in the analysis and treatment of effluents containing cationic dyes.
The accurate determination of trace metals in aqueous matrices necessitates robust sample preparation techniques that enable selective preconcentration of analytes while ensuring compatibility with subsequent instrumental analysis. Dispersive solid-phase extraction (d-SPE), a suspension-based variant of conventional solid-phase extraction (SPE), facilitates rapid sorbent–analyte interactions and enhances mass transfer efficiency through direct dispersion of the sorbent in the sample solution. This approach offers significant advantages over traditional column-based SPE, including faster extraction kinetics and greater operational simplicity. When supported by appropriately engineered sorbents, d-SPE exhibits considerable potential for the selective enrichment of trace metal analytes from complex aqueous matrices. In this work, a fibrous silica-based chelating material, DSA-KCC-1, was synthesized by grafting 3,5-Di-tert-butylsalicylaldehyde (DSA) onto aminopropyl-modified KCC-1. The dendritic KCC-1 scaffold enables fast dispersion and short diffusion pathways, while the immobilized phenolate–imine ligand introduces defined binding sites for transition-metal uptake. Characterization by FTIR, TGA, BET, FESEM/TEM, XRD, and elemental analysis confirmed the successfulness of functionalization and preservation of the fibrous mesostructured. Adsorption studies demonstrated chemisorption-driven interactions for Pb(II) and Co(II) from water, with Langmuir-type monolayer uptake and pseudo-second-order kinetic behavior. The nano-adsorbent exhibited a markedly higher affinity for Pb(II) than for Co(II), with maximum adsorption capacities of 99.73 and 66.26 mg g−1, respectively. Integration of the DSA-KCC-1 nanosorbent into a d-SPE–ICP-OES workflow enabled the reliable determination of trace levels of the target ions, delivering low limits of detection, wide linear calibration ranges, and stable performance over repeated extraction cycles. Analysis of NIST CRM 1643d yielded results in good agreement with the certified values, while the method demonstrated high tolerance toward common coexisting ions. The combined structural features of the KCC-1 support and the Schiff-base ligand indicate the suitability of DSA-KCC-1 for d-SPE workflows and demonstrate the potential of this SPE format for selective preconcentration of trace metal ions in aqueous matrices.
Aromatic amines such as 3-chloroaniline (3-CA) are toxic, persistent, and environmentally relevant water contaminants. Their reliable determination in aqueous systems has therefore become increasingly important. The monitoring of trace levels of these pollutants in complex water matrices typically necessitates a preconcentration step, most achieved via solid-phase extraction (SPE). However, conventional SPE sorbents often suffer from limited surface reactivity and slow adsorption kinetics, which compromise their performance at ultra-low concentrations. In contrast, nanomaterials offer a promising upgrade due to their high surface area, tunable chemistry, and rapid mass transfer behavior. In this work, mesoporous silica nanoparticles (MSNs) were synthesized via a green sol–gel route from sodium silicate precursor using polyethylene glycol template and then chemically functionalized with bisphenol A (BPA) to produce BPA-MSNs with π-rich and hydrogen-bonding active sites. Characterization using XRD, BET, FTIR, SEM/EDX, and TGA confirmed the successful synthesis and surface modification of the nanosorbent. BPA-MSNs achieved a maximum adsorption capacity of 30.2 mg/g toward 3-CA, fitting Langmuir and Jovanovic isotherm models. Kinetic analysis followed a pseudo-first-order model, indicating physisorption enhanced by π–π stacking and hydrogen bonding. The optimized dispersive SPE (D-SPE) method allowed a low detection limit (LOD = 0.016 mg/L), recovery of 73–85%, and precision below 5.3% RSD in tap, bottled, synthetic municipal wastewater and groundwater samples. The sorbent retained >90% efficiency over five reuse cycles, demonstrating strong potential as a reusable nanosorbent for preconcentration and remediation of aromatic amines in and treatment water analysis.
Mesoporous silica nanoparticles (MSNs) are promising nanomaterials for many applications, including water remediation, owing to their high surface area, tunable mesoporosity, and modifiable silanol-rich surfaces. However, their conventional synthesis often relies on costly tetraethyl orthosilicate (TEOS), cationic surfactants, organic solvents, and energy-intensive hydrothermal processing. Herein, a facile sustainable room-temperature sol–gel route is reported using inexpensive sodium silicate as the silica source, L-ascorbic acid as a mild biodegradable acid catalyst, and a binary nonionic surfactant system, Triton X-100/polysorbate 80, as the structure-directing template. The method replaces alkoxysilanes and hazardous cationic templates and eliminates external heating. It enables the production of uniform spherical MSNs with a locally ordered mesoporous structure, high specific surface area up to 551.5 m2 g−1, and large pore volume up to 1.98 cm3 g−1. The adsorption capability of the optimized MSNs as nano-adsorbents was demonstrated using amoxicillin (AMX) as a model pharmaceutical contaminant. The optimized sample showed maximum AMX uptake at pH 5.0, followed pseudo-second-order kinetics, and fitted the Langmuir isotherm with a monolayer capacity of 91.3 mg g−1. In spiked water matrices, the optimized MSNs recovered 88.5% and 84.4% of AMX from tap water spiked at 10 and 50 mg L−1, respectively, and 83.5% and 81.0% from synthetic municipal wastewater spiked at the same concentrations, with RSD values below 5%. The adsorbent further retained 94% of its initial capacity after five adsorption–desorption cycles. This work establishes a scalable green route for producing high-quality MSNs and demonstrates the feasibility of the resulting silanol-rich mesoporous nano-adsorbents for pharmaceutical micropollutant removal, while also indicating their potential suitability as carrier platforms for drug-delivery applications.
Polyethylene terephthalate (PET) is currently the most widely used type of plastic. PET plastic benefits include that it is lightweight, safe, cheap, and recyclable. Drinking water is an important route for human exposure to contaminants. One method of exposure is through leaching of antimony (Sb) from polyethylene terephthalate PET plastic. Antimony is a toxic element which causes harmful symptoms such as respiratory irritation, dysphagia, vomiting and eye and mucous membrane irritation. Leaching of antimony from three commercially available PET plastics was investigated in this study. The potential leaching of Sb was observed under different pH values, temperatures, and storage times. In this study, elemental mapping using scanning electron microscopy–energy dispersive x-ray spectroscopy (SEM–EDX) and inductively coupled plasma–optical emission spectrometry (ICP–OES) were employed to determine the weight percentages of antimony (Sb) on the inner surfaces of the PET plastic. The results revealed the presence of Sb in PET material, with significantly higher concentrations in PET 3, measured at 0.844 μg/L. Temperature and pH were investigated as factors influencing Sb leaching over time. The concentrations of Sb in bottled water ranged from 0.02 to 2.14 μg/L at different temperatures (25, 40, 50, or 60°C) and from 0.02 to 1.9 μg/L at pH values (6.5, 7, or 7.5) over 200 days. The maximum Sb concentrations reaching 2.14 μg/L at 60°C after 200 days, exceeded the Japanese limit of 2.00 μg/L. These findings highlight the potential health risks associated with Sb leaching from PET bottles, particularly under elevated temperature and low pH conditions.