A large variety of substances are used in building materials to improve their properties. In recent years, attention to organic additives used, for example, in renders, façade paints or roof sealing sheets has increased as these compounds have been detected in urban stormwater runoff and surface waters. In this paper, we show the extent of emissions induced by rain events in two study sites in Berlin. For this purpose, stormwater runoff from roofs, façades, and in storm sewers was sampled and analysed over a period of 1.5 years in two residential catchments. Results show that, in particular, the biocides diuron and terbutryn from façades, the root protection agents mecoprop and MCPA in bituminous sheeting, and zinc from roofs and façades reach concentrations in the stormwater sewer that exceed limit values for surface waters. Additionally, transformation products of the biocides were also detected. However, many other analysed substances were below the quantification limit or inconspicuous in their concentration levels. The emissions, modelled with the software COMLEAM, demonstrate that in urban areas the limit values in smaller surface waters are exceeded during wet weather. Furthermore, the orientation of the buildings to wind-driven rain is essential for the emitted load from façades. The calculated mass balances of both catchments show that a major portion of all substances remains on-site and infiltrates diffusely or in swales, while the remaining portion is discharged to stormwater sewers. For example, in one of the two study sites, <5% of diuron emissions are discharged to surface waters. Infiltration, in particular, is therefore a crucial pathway of pollution for soil and groundwater. Measures for source control are proposed to mitigate the leaching of environmentally relevant substances from construction materials.

Point-of-use ceramic filters are one of the strategies to address problems associated with waterborne diseases to remove harmful microorganisms in water sources prior to its consumption. In this study, development of adsorption-based ceramic depth filters composed of alumina platelets was achieved using spray granulation (calcined at 800 °C). Their virus retention performance was assessed using cartridges containing granular material (4 g) with two virus surrogates: MS2 and fr bacteriophages. Both materials showed complete removal, with a 7 log₁₀ reduction value (LRV) of MS2 up to 1 L. MgAl₂O₄-modified Al₂O₃ granules possessed a higher MS2 retention capacity, contrary to the shortcomings of retention limits in pure Al₂O₃ granules. No significant decline in the retention of fr occurred during filtration tests up to 2 L. The phase composition and morphology of the materials were preserved during filtration, with no magnesium or aluminum leakage during filtration, as confirmed by X-ray diffractograms, electron micrographs, and inductively coupled plasma-optical emission spectrometry. The proposed MgAl₂O₄-modified Al₂O₃ granular ceramic filter materials offer high virus retention, achieving the criterion for virus filtration as required by the World Health Organization (LRV ≥ 4). Owing to their high thermal and chemical stability, the developed materials are thus suitable for thermal and chemical-free regeneration treatments.

Buildings exposed to water can release undesirable substances which, once transported to environmental compartments, may cause unwanted effects. These exposure pathways need to be investigated and included in risk assessments to safeguard water quality and promote the sustainability of construction materials. The applied materials, exposure conditions, distribution routes and resilience of receiving compartments vary considerably. This demonstrates the need for a consistent concept that integrates knowledge of emission sources, leaching processes, transport pathways, and effects on targets. Such a consistent concept can serve as the basis for environmental risk assessment for several scenarios using experimentally determined emissions. Typically, a source–path–target concept integrates data from standardized leaching tests and models to describe leaching processes, the distribution of substances in the environment and the occurrence of substances at different points of compliance. This article presents an integrated concept for assessing the environmental impact of construction products on aquatic systems and unravels currently existing gaps and necessary actions. This manuscript outlines a source–path–target concept applicable to a large variety of construction products. It is intended to highlight key elements of a holistic evaluation concept that could assist authorities in developing procedures for environmental risk assessments and mitigation measures and identifying knowledge gaps.