The main aim of this study was a survey of micropollutants in stormwater runoff of Berlin (Germany) and its dependence on land-use types. In a one-year monitoring program, event mean concentrations were measured for a set of 106 parameters, including 85 organic micropollutants (e.g., flame retardants, phthalates, pesticides/biocides, polycyclic aromatic hydrocarbons (PAH)), heavy metals and standard parameters. Monitoring points were selected in five catchments of different urban land-use types, and at one urban river. We detected 77 of the 106 parameters at least once in stormwater runoff of the investigated catchment types. On average, stormwater runoff contained a mix of 24 µg L⁻¹ organic micropollutants and 1.3 mg L⁻¹ heavy metals. For organic micropollutants, concentrations were highest in all catchments for the plasticizer diisodecyl phthalate. Concentrations of all but five parameters showed significant differences among the five land-use types. While major roads were the dominant source of traffic-related substances such as PAH, each of the other land-use types showed the highest concentrations for some substances (e.g., flame retardants in commercial area, pesticides in catchment dominated by one family homes). Comparison with environmental quality standards (EQS) for surface waters shows that 13 micropollutants in stormwater runoff and 8 micropollutants in the receiving river exceeded German quality standards for receiving surface waters during storm events, highlighting the relevance of stormwater inputs for urban surface waters.

The effect of combined sewer overflow (CSO) control measures should be validated during operation based on monitoring of CSO activity and subsequent comparison with (legal) requirements. However, most CSO monitoring programs have been started only recently and therefore no long-term data is available for reliable efficiency control. A method is proposed that focuses on rainfall data for evaluating the effectiveness of CSO control measures. It is applicable if a sufficient time-series of rainfall data and a limited set of data on CSO discharges are available. The method is demonstrated for four catchments of the Berlin combined sewer system. The analysis of the 2000–2007 data shows the effect of CSO control measures, such as activation of in-pipe storage capacities within the Berlin system. The catchment, where measures are fully implemented shows less than 40% of the CSO activity of those catchments, where measures have not yet or not yet completely been realised.

A large variety of substances are used in building materials to improve their properties. In recent years, attention to organic additives used, for example, in renders, façade paints or roof sealing sheets has increased as these compounds have been detected in urban stormwater runoff and surface waters. In this paper, we show the extent of emissions induced by rain events in two study sites in Berlin. For this purpose, stormwater runoff from roofs, façades, and in storm sewers was sampled and analysed over a period of 1.5 years in two residential catchments. Results show that, in particular, the biocides diuron and terbutryn from façades, the root protection agents mecoprop and MCPA in bituminous sheeting, and zinc from roofs and façades reach concentrations in the stormwater sewer that exceed limit values for surface waters. Additionally, transformation products of the biocides were also detected. However, many other analysed substances were below the quantification limit or inconspicuous in their concentration levels. The emissions, modelled with the software COMLEAM, demonstrate that in urban areas the limit values in smaller surface waters are exceeded during wet weather. Furthermore, the orientation of the buildings to wind-driven rain is essential for the emitted load from façades. The calculated mass balances of both catchments show that a major portion of all substances remains on-site and infiltrates diffusely or in swales, while the remaining portion is discharged to stormwater sewers. For example, in one of the two study sites, <5% of diuron emissions are discharged to surface waters. Infiltration, in particular, is therefore a crucial pathway of pollution for soil and groundwater. Measures for source control are proposed to mitigate the leaching of environmentally relevant substances from construction materials.

In Berlin, Germany, the demand for enhanced protection of the environment and the growing economic pressure have led to an increased application of control concepts within the sewage system. A global control strategy to regulate the pumpage of the combined sewage system to the treatment plant was developed and evaluated in a theoretical study. The objective was to reduce CSO. In this paper an extension of the existing control algorithm by information from online rainfall measurement and radar nowcasting is described. The rainfall information is taken into account by two additive terms describing the predicted volume from rainfall runoff. On the basis of numerical simulation the potential of these two complementary forecast terms in the global control algorithm to further reduce CSO is evaluated. The investigations are based on long-time simulations that are conducted with the dynamic flow routing model InfoWorks for three subcatchments of the Berlin drainage system. The results show that at the current Berlin system a CSO reduction of only 0.8% is possible. The effect of the forecast terms is limited by operational constraints. Limits are set to both, the delivery from each individual pump station and the total pumpage to the treatment plant.

Data play an important role in water-related research. Based on experiences in data collection and data processing in water-related research this paper proposes – both from a computer scientist's and an environmental engineer's point of view – a set of rules for data handling: Rule 1: Protect raw data; Rule 2: Save metadata; Rule 3: Use databases; Rule 4: Separate data from processing; Rule 5: Use programming; Rule 6: Avoid redundancy; Rule 7: Be transparent; Rule 8: Use standards and naming conventions. Applying these rules (i) increases the quality of data and results, (ii) allows to prepare data for long-term usage and make data accessible to different people, (iii) makes data processing transparent and results reproducible, and (iv) saves – at least in the long run – time and effort. With this contribution the authors would like to start a discussion about best data handling practices and present a first checklist of data handling and data processing for practitioners and researchers working in the water sector.