A 5G frame structure designed for efficient support of users with highly diverse service requirements is proposed. It includes support for mobile broadband data, mission-critical communication, and massive machine communication. The solution encompasses flexible multiplexing of users on a shared channel with dynamic adjustment of the transmission time interval in coherence with the service requirements per link. This allows optimizing the fundamental tradeoffs between spectral efficiency, latency, and reliability for each link and service flow. The frame structure is based on in-resource physical layer control signaling that follows the corresponding data transmission for each individual user. Comparison against the corresponding LTE design choices shows attractive benefits.

URLLC have the potential to enable a new range of applications and services: from wireless control and automation in industrial environments to self-driving vehicles. 5G wireless systems are faced by different challenges for supporting URLLC. Some of the challenges, particularly in the downlink direction, are related to the reliability requirements for both data and control channels, the need for accurate and flexible link adaptation, reducing the processing time of data retransmissions, and the multiplexing of URLLC with other services. This article considers these challenges and proposes state-of-the-art solutions covering different aspects of the radio interface. In addition, system-level simulation results are presented, showing how the proposed techniques can work in harmony in order to fulfill the ambitious latency and reliability requirements of upcoming URLLC applications.

The system requirements for IMT-A are currently being specified by the ITU. Target peak data rates of 1 Gb/s in local areas and 100 Mb/s in wide areas are expected to be provided by means of advanced MIMO antenna configurations and very high spectrum allocations (on the order of 100 MHz). For the downlink, OFDMA is unanimously considered the most appropriate technique for achieving high spectral efficiency. For the uplink, the LTE of the 3GPP, for example, employs SCFDMA due to its low PAPR properties compared to OFDMA. For future IMT-A systems, the decision on the most appropriate uplink access scheme is still an open issue, as many benefits can be obtained by exploiting the flexible frequency granularity of OFDMA. In this article we discuss the suitability of using OFDMA or SC-FDMA in the uplink for local area high-data-rate scenarios by considering as target performance metrics the PAPR and multiuser diversity gain. Also, new bandwidth configurations have been proposed to cope with the 100 MHz spectrum allocation. In particular, the PAPR analysis shows that a localized (not distributed) allocation of the resource blocks (RBs) in the frequency domain shall be employed for SC-FDMA in order to keep its advantages over OFDMA in terms of PAPR reduction. Furthermore, from the multiuser diversity gain evaluation emerges the fact that the impact of different RB sizes and bandwidth configurations is low, given the propagation characteristics of the assumed local area environment. For full bandwidth usage, OFDMA only outperforms SC-FDMA when the number of frequency multiplexed users is low. As the spectrum load decreases, instead, OFDMA outperforms SC-FDMA also for a high number of frequency multiplexed users, due to its more flexible resource allocation. In this contex different channel-aware scheduling algorithms have been proposed due to the resource allocation differences between the two blocks chemes.

Ultra-reliable low latency communication requires innovative resource management solutions that can guarantee high reliability at low latency. Grant-free random access, where channel resources are accessed without undergoing assignment through a handshake process, is proposed in 5G New Radio as an important latency reducing solution. However, this comes at an increased likelihood of collisions resulting from uncoordinated channel access. Novel reliability enhancement techniques are therefore needed. This article provides an overview of grant-free random access in 5G New Radio focusing on the ultra-reliable low latency communication service class, and presents two reliability-enhancing solutions. The first proposes retransmissions over shared resources, whereas the second proposal incorporates grant-free transmission with non-orthogonal multiple access where overlapping transmissions are resolved through the use of advanced receivers. Both proposed solutions result in significant performance gains, in terms of reliability as well as resource efficiency. For example, the proposed non-orthogonal multiple access scheme can support a normalized load of more than 1.5 users/slot at packet loss rates of ~ 10 ⁻⁵ a significant improvement over conventional grant-free schemes like slotted-ALOHA.

The continuous proliferation of applications requiring wireless connectivity will eventually result in latency and reliability requirements beyond what is achievable with current technologies. Such applications can for example include industrial control at the sensor-actuator level, intra-vehicle communication, fast closed loop control in intra-body networks and intra-avionics communication. In this article, we present the design of short range Wireless Isochronous Real Time (WIRT) in-X subnetworks aimed at life-critical applications with communication cycles shorter than 0:1 ms and outage probability below 10-6. Such targets are clearly beyond what is supported by the 5th Generation (5G) radio technology, and position WIRT as a possible 6th Generation (6G) system. WIRT subnetworks are envisioned to be deployed for instance in industrial production modules, robots, or inside vehicles.We identify technology components as well as spectrum bands for WIRT subnetworks and present major design aspects including frame structure and transmission techniques. The performance evaluation considering a dense scenario with up to 2 devices per m2 reveal that a multi-GHz spectrum may be required for ensuring high spatial service availability. The possibility of running WIRT as an ultra-wideband underlay system in the centimeter-wave spectrum region is also discussed. Aspects related to design of techniques for the control plane as well as enhancements to the presented design is the focus of our ongoing research.

The 6th Generation (6G) radio access technology is expected to support extreme communication requirements in terms of throughput, latency and reliability, which can only be achieved by providing capillary wireless coverage. In this paper, we present our vision for short-range low power 6G ‘in-X’ subnetworks, with the ‘X’ standing for the entity in which the cell is deployed, e.g., a production module, a robot, a vehicle, a house or even a human body. Such cells can support services that can be life-critical and that traditionally relied on wired systems. We discuss potential deployment options, as well as candidate air interface components and spectrum bands. Interference management is identified as a major challenge in dense deployments, which needs to handle also non-cellular types of interference like jamming attacks and impulsive noise. A qualitative example of interference-robust system design is also presented.