This paper reports two experimental fires conducted at field-scale in Corsica, across a particular mountain shrubland. The orientation of the experimental plots was chosen in such a way that the wind was aligned along the main slope direction in order to obtain a high intensity fire. The first objective was to study the high intensity fire behavior by evaluating the propagation conditions related to its speed and intensity, as well as the geometry of the fire front and its impact on different targets. Therefore, an experimental protocol was designed to determine the properties of the fire spread using UAV cameras and its impact using heat flux gauges. Another objective was to study these experiments numerically using a fully physical fire model, namely FireStar3D. Numerical results concerning the fire dynamics, particularly the ROS, were also compared to other predictions of the FireStar2D model. The comparison with experimental measurements showed the robustness of the 3D approach with a maximum difference of 5.2% for the head fire ROS. The fire intensities obtained revealed that these experiments are representative of high intensity fires, which are very difficult to control in the case of real wildfires. Other parameters investigated numerically (flame geometry and heat fluxes) were also in fairly good agreement with the experimental measurements and confirm the capacity of FireStar3D to predict surface fires of high intensity.

A safe separation distance (SSD) needs to be considered during firefighting activities (fire suppression or people evacuation) against wildfires. The SSD is of critical interest for both humans and assets located in the wildland–urban interfaces (WUI). In most cases, the safety zone models and guidelines assume a flat terrain and only radiant heating. Nevertheless, injuries or damage do not result exclusively from radiant heating. Indeed, convection must be also considered as a significant contribution of heat transfer, particularly in the presence of the combined effects of sloping terrain and a high wind velocity. In this work, a critical case study is considered for the village of Sari-Solenzara in Corsica (France). This site location was selected by the operational staff since high-intensity fire spread is likely to occur in the WUI during wind-blown conditions. This study was carried out for 4 m high shrubland, a sloping terrain of 12° and a wind speed of 16.6 m/s. The numerical simulations were performed using a fully physical fire model, namely, FireStar2D, to investigate a case of fire spreading, which is thought to be representative of most high wildfire risk situations in Corsica. This study is based on the evaluation of the total (radiative and convective) heat flux received by two types of targets (human bodies and buildings) located ahead of the fire front. The results obtained revealed that the radiation was the dominant heat transfer mode in the evaluation of the SSD. In addition, the predictions were consistent with the criterion established by the operational experts, which assumes that in Corsica, a minimum SSD of 50 m is required to keep an equipped firefighter without injury in a fuelbreak named ZAL. This numerical work also provides correlations relating the total heat flux to the SSD.

This study investigates the effectiveness of immersive audiovisual simulations in eliciting emotional responses and replicating the psychological and cognitive demands of high-risk operational environments, particularly in firefighting scenarios. Conducted in two successive phases, the research first employed a pilot study involving 90 participants (45 firefighters and 45 students) who were exposed to a controlled audiovisual simulation. Emotional responses were assessed using the Differential Emotion Scale (DES), the Emotion Regulation Questionnaire (ERQ), and the Perceived Stress Scale (PSS). The second phase involved an immersive room experiment with 36 firefighters, where the same audiovisual stimulus was presented in a fully immersive environment, integrating interactive decision-making tasks to enhance ecological validity. The findings indicate that both methods effectively elicited the targeted emotional responses, including stress, fear, anger, and serenity, with firefighters exhibiting greater emotional regulation and adaptive coping strategies compared to students. The immersive room environment significantly amplified emotional engagement, resulting in stronger emotional responses from the first scene onward. These results underscore the potential of immersive training tools in preparing emergency responders for high-stress situations by strengthening psychological resilience, improving emotional regulation, and optimizing decision-making under pressure. The study contributes to advancing evidence-based training methodologies in emergency response, public safety, and crisis management, emphasizing the importance of integrating immersive technologies into professional training programs.

The behavior of a grassland fire propagating downstream of a forest canopy has been simulated numerically using the fully physics-based wildfire model FIRESTAR3D. This configuration reproduces quite accurately the situation encountered when a wildfire spreads from a forest to an open grassland, as can be the case in a fuel break or a clearing, or during a prescribed burning operation. One of the objectives of this study was to evaluate the impact of the presence of a canopy upstream of a grassfire, especially the modifications of the local wind conditions before and inside a clearing or a fuel break. The knowledge of this kind of information constitutes a major element in improving the safety conditions of forest managers and firefighters in charge of firefighting or prescribed burning operations in such configurations. Another objective was to study the behavior of the fire under realistic turbulent flow conditions, i.e., flow resulting from the interaction between an atmospheric boundary layer (ABL) with a surrounding canopy. Therefore, the study was divided into two phases. The first phase consisted of generating an ABL/canopy turbulent flow above a pine forest (10 m high, 200 m long) using periodic boundary conditions along the streamwise direction. Large Eddy Simulations (LES) were carried out for a sufficiently long time to achieve a quasi-fully developed turbulence. The second phase consisted of simulating the propagation of a surface fire through a grassland, bordered upstream by a forest section (having the same characteristics used for the first step), while imposing the turbulent flow obtained from the first step as a dynamic inlet condition to the domain. The simulations were carried out for a wind speed that ranged between 1 and 12 m/s; these values have allowed the simulations to cover the two regimes of propagation of surfaces fires, namely plume-dominated and wind-driven fires.

This paper presents a research program called CP2DIMG conducted at the Federation of Environment and Society Research at the University of Corsica. The goal of CP2DIMG is to better understand the influence of emotions on operational personnel’s decision-making, aiming to test training systems dedicated to individuals facing high stress during their professional activities. This type of training system is intended to enhance emotional and mental resilience, thereby improving decision-making ability in uncertain situations under the influence of emotions related to the event. For implementation, the method will be tailored to the specificities of two categories of operational personnel: firefighters and municipal police officers. The expected results will address significant demands from operational professionals in the Mediterranean region for firefighting safety but also for large-scale or highly complex interventions. This study fully integrates into the challenges of the Mediterranean region: forest management, risk prevention plans, and preparedness of local actors responsible for crisis management. Furthermore, individuals responsible for crisis management, including local government officials and risk management and security personnel, will be able to use the obtained results for effective decision-making.

This work is devoted to a theoretical and numerical study of the dynamics of a two-phase system vapour bubble in equilibrium with its liquid phase under translational vibrations in the absence of gravity. The bubble is initially located in the container centre. The liquid and vapour phases are considered as viscous and incompressible. Analysis focuses on the vibrational conditions used in experiments with the two-phase system SF $_6$ in the MIR space station and with the two-phase system para-Hydrogen (p-H $_2$ ) under magnetic compensation of Earth's gravity. These conditions correspond to small-amplitude high-frequency vibrations. Under vibrations, additionally to the forced oscillations, an average displacement of the bubble to the wall is observed due to an average vibrational attraction force related to the Bernoulli effect. Vibrational conditions for SF $_6$ correspond to much smaller average vibrational force (weak vibrations) than for p-H $_2$ (strong vibrations). For weak vibrations, the role of the initial vibration phase is crucial. The difference in the behaviour at different initial phases is explained using a simple mechanical model. For strong vibrations, the average displacement to the wall stops when the bubble reaches a quasi-equilibrium position where the resulting average force is zero. At large vibration velocity amplitudes this position is near the wall where the bubble performs only forced oscillations. At moderate vibration velocity amplitudes the bubble average displacement stops at a finite distance from the wall, then large-scale damped oscillations around this position accompanied by forced oscillations are observed. Bubble shape oscillations and the parametric resonance of forced oscillations are also studied.