Damian Joachimiak

Dr. Damian Joachimiak

orcid

Research Focus & Metrics

Academic Career Length

13Years (2014-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
5 November 2020 in Energies
Verified
Journal Article
Open access
PDF file
DJDamian Joachimiak
Damian Joachimiak
AFAndrzej Frąckowiak
Andrzej Frąckowiak
This paper focuses on the analysis of the gas flow in the axisymmetric mini gap bounded by the surface of the top of the labyrinth seal tooth and the surface of the body. It includes the results of experimental research and numerical calculations. Experimental research focused on the analysis of gas flow for six clearance heights in a wide range of pressure drops. Based on this research, we determined the mass flow in the clearance. Using the Saint-Venant equation, we determined the flow coefficient versus the pressure ratio upstream and downstream from the seal. Flow coefficients for various clearance heights obtained from the experiment can be divided into two data groups, the values of which differ significantly. To explain changes in the value of the gas flow coefficient for selected clearance heights, numerical analysis of the said gas flow was performed using the Fluent software. This analysis allowed us to explain the reason for the variability of the flow coefficient. This research can be the basis for determining the change of seal integrity during operation for staggered and stepped seals.

24 November 2021 in Energies
Verified
Journal Article
Open access
PDF file
DJDamian Joachimiak
Damian Joachimiak
This paper presents a novel method of labyrinth seals design. This method is based on CFD calculations and consists in the analysis of the phenomenon of gas kinetic energy carry-over in the seal chambers between clearances. The design method is presented in two variants. The first variant is designed for seals for which it is impossible to change their external dimensions (length and height). The second variant enables designing the seal geometry without changing the seal length and with a slight change of the seal height. Apart from the optimal distribution of teeth, this variant provides for adjusting chambers geometry to flow conditions. As the result of using both variants such design of the seal geometry with respect to leakage is obtained which enables achieving kinetic energy dissipation as uniform as possible in each chamber of the seal. The method was developed based on numerical calculations and the analysis of the flow phenomena. Calculation examples included in this paper show that the obtained reduction of leakage for the first variant ranges from 3.4% to 15.5%, when compared with the initial geometry. The relation between the number of seal teeth and the leakage rate is also analyzed here. The second variant allows for reduction of leakage rate by 15.4%, when compared with the geometry with the same number of teeth. It is shown that the newly designed geometry reveals almost stable relative reduction of leakage rate irrespective of the pressure ratio upstream and downstream the seal. The efficiency of the used method is proved for various heights of the seal clearance.

1 September 2016 in Archives of Thermodynamics
Verified
Journal Article
Open access
PDF file
DJDamian Joachimiak
Damian Joachimiak
PKPiotr Krzyślak
Piotr Krzyślak
The paper discusses thermodynamic phenomena accompanying the flow of gas in a slotted seal. The analysis of the gas flow has been described based on an irreversible adiabatic transformation. A model based on the equation of total enthalpy balance has been proposed. The iterative process of the model aims at obtaining such a gas temperature distribution that will fulfill the continuity equation. The model allows for dissipation of the kinetic energy into friction heat by making use of the Blasius equation to determine the friction coefficient. Within the works, experimental research has been performed of the gas flow in a slotted seal of slot height 2 mm. Based on the experimental data, the equation of local friction coefficient was modified with a correction parameter. This parameter was described with the function of pressure ratio to obtain a mass flow of the value from the experiment. The reason for taking up of this problem is the absence of high accuracy models for calculating the gas flow in slotted seals. The proposed model allows an accurate determination of the mass flow in a slotted seal based on the geometry and gas initial and final parameters.

8 May 2024 in Energy
Verified
Journal Article
Closed access
DJDamian Joachimiak
Damian Joachimiak
MJMagda Joachimiak
Magda Joachimiak
AFAndrzej Frąckowiak
Andrzej Frąckowiak

27 June 2017 in Polish Maritime Research
Verified
Journal Article
Open access
PDF file
DJDamian Joachimiak
Damian Joachimiak
PKPiotr Krzyślak
Piotr Krzyślak
Steam turbines are used as propulsion components in not only power plants but also on merchant and naval ships. The geometry of the steam turbine seals changes throughout the machine life cycle. The rate of deterioration of these seals, in turn, affects heavily the efficiency of the thermal machine. However, the literature overview does not provide any research reports on flow phenomena occurring in heavily deteriorated seals. The paper describes the course and results of investigations into a model straight through labyrinth seal composed of 4 discs, each with the slot height of 2 mm. The investigations have been conducted with air as the working medium. Changes of gas flow parameters due to wear were analysed. Based on the experimental data, more intensive leakage was observed as the result of the increased slot height. The static pressure distribution along the examined segment was measured. The experimentally recorded distribution differed remarkably from the theoretical assumptions. Another part of the experimental research focused on comparing the gas velocities at points situated upstream of the first and second seal disc. The velocity measurements were carried out using a constant temperature wire probe. This part of the investigations provided opportunities for analysing the influence of seal wear on gas flow conditions in the seal segment. The paper compares the results of the experimental research with those obtained using the CFX software. The presented results of velocity distributions provide a clear picture of the nature of the gas flow in the seal, which enables its analysis.

1 June 2015 in Archives of Thermodynamics
Verified
Journal Article
Open access
PDF file
DJDamian Joachimiak
Damian Joachimiak
PKPiotr Krzyślak
Piotr Krzyślak
Paper presents the results of experimental and numerical research of a model segment of a labyrinth seal for a different wear level. The analysis covers the extent of leakage and distribution of static pressure in the seal chambers and the planes upstream and downstream of the segment. The measurement data have been compared with the results of numerical calculations obtained using commercial software. Based on the flow conditions occurring in the area subjected to calculations, the size of the mesh defined by parameter y+ has been analyzed and the selection of the turbulence model has been described. The numerical calculations were based on the measurable thermodynamic parameters in the seal segments of steam turbines. The work contains a comparison of the mass flow and distribution of static pressure in the seal chambers obtained during the measurement and calculated numerically in a model segment of the seal of different level of wear