The research is focused on the dynamic compressive strength, impact toughness and the distribution law of fragmentation size for the plain concrete and the carbon nanofiber reinforced concrete with four fiber volume contents (0.1%, 0.2%, 0.3% and 0.5%) under impact load by using the Φ100 mm split-Hopkinson pressure bar. Based on the fractal theory and considering the micropore structure characteristics of the specimen, the impact of the strain rate and the dosage of carbon nanofibers on the dynamic mechanical performance of concrete is analyzed. According to the results, both the dynamic compressive strength and the impact toughness increase continuously with the improvement of the strain rate level at the same dosage of fiber, showing strong strain rate strengthening effect; at the same strain rate level, the impact toughness increases gradually with the increase in the fiber dosage, while the dynamic compressive strength tends to increase at first and then decrease; the distribution of the fragmentation size of concrete is a fractal in statistical sense, in general, the higher the strain rate level, the higher the number of fragments, the lower the size, and the larger the fractal dimension; the optimal dosage of carbon nanofibers to improve the dynamic compressive strength of concrete is 0.3%, and the pore structure characteristics of carbon nanofiber reinforced concrete exhibit obvious fractal features.
In the discrete element method, the damping coefficient, which is a key parameter for rational simulation, is uncertain and often chosen based on researchers experience. To make the physical model reflect the reality better, in this paper acoustic technology is used to calibrate the damping coefficient. Oscillogram of the acoustic wave generated by the collisions is analyzed and the calibrated damping coefficient is obtained to be 0.5. The calibrated parameters are used to simulate the random packing process of 2000 monosize spherical particles. The final packing density is 0.625, which is in accordance with the classic measurements quite well. Besides the obtained correct damping coefficient, in this paper both the usefulness of the physical model and the practicability of acoustic technology for detecting the collision time are also demonstrated precisely.
To explore the law of microwave deicing of carbon-fiber-modified concrete under the action of multiple factors and improve its application in pavement, in this study, we designed a test of the heat absorption and deicing effect of concrete under the action of multiple factors. We found that the law of heat absorption and deicing of CFRP is influenced by the coupling effect of fiber length and dosage, height (straight-line distance between the microwave receiving surface and bell component), initial temperature and ice cover. The temperature rises fastest when the fiber dosage is 0.2% and fiber length is 6 mm without ice. Further analysis of other factors shows that the deicing effect is optimal when the height is 40 mm, and the presence of ice on fiber-reinforced concrete weakens the microwave deicing efficiency, although the reduction is small. The test results of these two factors are in agreement with the simulation results and conform to expectations. The initial temperature has a considerable influence on the deicing efficiency. In practical applications, the deicing time should be adjusted according to the initial temperature in order to prevent the phenomenon of secondary icing when the heating time is too long. Based on heat generation and heat dissipation, the four stages of microwave deicing were analyzed, and the relationship with the temperature increase rate was deduced. It was proven that carbon fiber affected the deicing efficiency by changing the microwave absorption and reflection effect of concrete.
The mechanical properties of the static and dynamic compression of concrete eroded by a 15% sodium sulfate solution were explored with a 70-mm-diameter true triaxial static-dynamic comprehensive loading test system, and an analysis of the weakening mechanisms for the degree of macroscopic damage and microscopic surface changes of eroded concrete were conducted in combination with damage testing based on relevant acoustic characteristics and SEM scanning. The experience obtained in this paper is used to analyze and solve the problem that the bearing capacity of concrete buildings is weakened due to the decrease in durability under the special conditions of sulfate erosion. The results showed that, in a short time, the properties of concrete corroded by sulfate solution were improved to a certain extent due to continuous hydration. When the corrosion time was prolonged, the internal concrete structure was destroyed after it was eroded by sulfate, and its dynamic and static strength, deformability, and energy absorption were reduced to differing degrees, thus greatly inhibiting the overall mechanical performance of concrete; the dynamic compressive strength changed with strain that exhibited a significant strain rate effect; and, under the influence of sulfate erosion and hydration, the longitudinal wave velocity increased first and then decreased. The longitudinal wave velocity was slower than that of concrete under normal environment and distilled water immersion condition. SEM and acoustic wave analysis indicated that the internal concrete structure was destroyed after it was eroded by sulfate, and its dynamic and static strength, deformability, and energy absorption were reduced to differing degrees, thus greatly inhibiting the overall mechanical performance of concrete.
In order to explore the impact compression performance of aluminum oxide fiber concrete, the impact compression test of aluminum oxide fiber concrete with different contents is carried out by using the split Hopkinson pressure bar (SHPB) comprehensive test system with a diameter of 100 mm. Our intent was to explore the influence law of different contents of aluminum oxide fiber on the impact compression performance of concrete matrixes, and to optimize and establish a constitutive model based on damage theory and stress residue. The results show that adding alumina short-cut fiber to concrete changes its mechanical properties of impact compression to a certain extent. When the volume content of fiber is 0.2%, the characteristics of strength, deformation, and energy are the best, and the excess aluminum oxide fiber reduces the original performance due to agglomeration and other factors; the strength characteristics, peak deformation characteristics, and energy characteristics of aluminum oxide fiber concrete are significantly affected by strain rate and impact velocity. Based on the Zhu-Wang-Tang non-linear viscoelastic model (ZWT model), the complexity coefficient is optimized and the residual stress term is added to construct the prediction model of aluminum oxide fiber concrete. The parameters in the model have a good prediction effect on the stress-strain curve under different strain rates.
19 November 2025 in Construction and Building Materials