Phase fading is a critical issue that hinders phase retrieval in the phase-sensitive optical time-domain reflectometry (ϕ-OTDR). This paper introduces a novel approach for mitigating fading effects by implementing a three-layer structure multiplexing (TLSM) technique. The TLSM method is based on multiple pulses detection, trace decomposition and spatial multiplexing to create independent sub-components, which are then re-combined by rotated vector summation (RVS) method. Additionally, a Kalman filter is employed to eliminate the phase mismatching among these sub-components. Experimental results demonstrate a fading-free interrogation in a 40-km fiber sensing range and distorted vibration signal can be corrected. The demodulated amplitude trough could be improved by 35.2 dB. Large-sample testing confirms no occurrence of fading throughout the entire 40 km sensing range, indicating the high reliability of this method.
The performances and cost of the phase-sensitive optical time-domain reflectometry (Φ-OTDR) systems are heavily influenced by the lasers used. Traditionally, Φ-OTDR systems rely on highly coherent ultra-narrow linewidth lasers (NLL). This paper proposes a Φ-OTDR system that utilizes self-mixing interferometry to mitigate the impact of laser phase noise and a triple-frequency scheme to achieve fading-free detection over 40 km. The proposed scheme employs an inexpensive fixed wavelength distributed feedback semiconductor laser (DFB-SL) with a 93 kHz linewidth as the light source and successfully mitigates the noise floor by 8 to 22 dB within a range of 35 km compared to the performance of conventional systems. Leveraging the high-power output of the DFB-SL, the proposed scheme eliminates the need for an online erbium-doped optical fiber amplifier (EDFA) and achieves fading-free detection over 10 km. The results in this study offer a practical solution to address the bottleneck issue of laser phase noise in Φ-OTDR systems and contribute to the development of cost-effective systems and on-chip integration, eliminating the requirement for NLL and online amplifiers.
In this letter, a resolution enhancement and signal-to-noise ratio (SNR) improvement scheme for digital optical frequency comb (DOFC)-based Brillouin optical time-domain analysis (BOTDA) ultrafast distributed sensing employing a pump pulse array is proposed. Based on the properties of the time-invariant linear system and the cyclic revolution theorem, experimental results indicate that its spatial resolution reaches 10.24 m while the frequency uncertainty is below 2 MHz over a 9.5 km fiber. Moreover, the response time is only 209.6 μs and the temperature measurement error is less than 0.52 °C.
6 March 2026 in Journal of Optical Communications and Networking
Integrated sensing and communication (ISAC) systems enable communication while concurrently endowing optical fiber with sensing capability, utilizing telecommunication networks to detect signals such as traffic. Multi-core fiber provides abundant exploitable spatial channels for ISAC systems. This work proposes a space division multiplexing distributed acoustic sensing (SDM-DAS) scheme for ISAC. By leveraging multi-component sensing signals transmitted through multiple fiber cores, SDM-DAS achieves a sensing sensitivity of 1.78p ε /Hz at 10 km under a spatial resolution of 20 m. It also demonstrates a 10 dB suppression in fading noise and a detection bandwidth three times greater than that of conventional DAS. The system employs space and wavelength division multiplexing to enable co-propagation of communication and sensing signals within individual cores of a 16.5 km field-deployed seven-core fiber, achieving real-time traffic transmission with a net capacity of 117 Tb/s. Experimental results show that the setup introduces no inter-core crosstalk and does not degrade the bit error rate of the concurrently operating communication system. Furthermore, the proposed ISAC system integrating SDM-DAS successfully detects vibration signals from vehicular traffic and metro operations in real-world field deployment.
26 March 2026 in Journal of Optical Communications and Networking
The exponential growth of information has accelerated the development of telecommunications infrastructure, particularly submarine communication cables. These cables not only handle massive international data transmission but also hold potential as a network for submarine earthquake monitoring. The integration of sensing technology and communications in submarine optical cable networks enables this dual functionality. In this work, we propose a novel, to our knowledge, method for submarine earthquake location estimation utilizing linear earthquake wavefronts detected through integrated sensing and communication (ISAC) submarine cables. By converting cables into dense earthquake arrays and analyzing wavefront characteristics, our approach achieves a minimum comprehensive localization error of (±0.02435 ∘ N, ±0.05025 ∘ E) compared to the official references, translating to a comprehensive error of ±6.19km. The incorporation of submarine earthquake location estimation into communication networks based on submarine optical cables offers a cost-effective solution to the long-standing issue of sparse ocean earthquake networks while providing essential earthquake data for submarine exploration and imaging.
Optical fibers can carry data while also supporting sensing based on Rayleigh backscatter. A single continuous quadrature phase-shift keying orthogonal frequency-division multiplexing (QPSK-OFDM) waveform supports communication and distributed acoustic sensing without sensing bursts, zero padding, or separate wavelength or time resources, but the cyclic prefix (CP) duration must exceed the fiber round-trip delay. For backscatter sensing, polarization combining and subband combining suppress polarization fading and Rayleigh fading, respectively. Over 5.9 km, the system achieves a 2.50 m spatial resolution, a 7.915 kHz sensing sampling rate, and a 69.4 p ε /Hz noise floor. Forward transmission at 208.95 Mb/s yields no observed bit errors and a root mean square error vector magnitude (RMS EVM) of −27.00 dB.