The CALIPSO (Cloud-Aerosol Lidar and Infrared Pathfinder Satellite Observations) level 3 aerosol profile product reports globally gridded, quality-screened, monthly mean aerosol extinction profiles retrieved by CALIOP (the Cloud-Aerosol Lidar with Orthogonal Polarization). This paper describes the quality screening and averaging methods used to generate the version 3 product. The fundamental input data are CALIOP level 2 aerosol extinction profiles and layer classification information (aerosol, cloud, and clear-air). Prior to aggregation, the extinction profiles are quality-screened by a series of filters to reduce the impact of layer detection errors, layer classification errors, extinction retrieval errors, and biases due to an intermittent signal anomaly at the surface. The relative influence of these filters are compared in terms of sample rejection frequency, mean extinction, and mean aerosol optical depth (AOD). The “extinction QC flag” filter is the most influential in preventing high-biases in level 3 mean extinction, while the “misclassified cirrus fringe” filter is most aggressive at rejecting cirrus misclassified as aerosol. The impact of quality screening on monthly mean aerosol extinction is investigated globally and regionally. After applying quality filters, the level 3 algorithm calculates monthly mean AOD by vertically integrating the monthly mean quality-screened aerosol extinction profile. Calculating monthly mean AOD by integrating the monthly mean extinction profile prevents a low bias that would result from alternately integrating the set of extinction profiles first and then averaging the resultant AOD values together. Ultimately, the quality filters reduce level 3 mean AOD by −24 and −31 % for global ocean and global land, respectively, indicating the importance of quality screening.
9 February 2023 in Atmospheric Measurement Techniques
The accurate classification of aerosol types injected into the stratosphere is important to properly characterize their chemical and radiative impacts within the Earth climate system. The updated stratospheric aerosol subtyping algorithm used in the version 4.5 (V4.5) release of the Cloud Aerosol Lidar with Orthogonal Polarization (CALIOP) level 2 data products now delivers more comprehensive and accurate classifications than its predecessor. The original algorithm identified four aerosol subtypes for layers detected above the tropopause: volcanic ash, smoke, sulfate/other, and polar stratospheric aerosol (PSA). In the revised algorithm, sulfates are separately identified as a distinct, homogeneous subtype, and the diffuse, weakly scattering layers previously assigned to the sulfate/other class are recategorized as a fifth “unclassified” subtype. By making two structural changes to the algorithm and revising two thresholds, the V4.5 algorithm improves the ability to discriminate between volcanic ash and smoke from pyrocumulonimbus injections, improves the fidelity of the sulfate subtype, and more accurately reflects the uncertainties inherent in the classification process. The 532 nm lidar ratio for volcanic ash was also revised to a value more consistent with the current state of knowledge. This paper briefly reviews the previous version of the algorithm (V4.1 and V4.2) then fully details the rationale and impact of the V4.5 changes on subtype classification frequency for specific events where the dominant aerosol type is known based on the literature. Classification accuracy is best for volcanic ash due to its characteristically high depolarization ratio. Smoke layers in the stratosphere are also classified with reasonable accuracy, though during the daytime a substantial fraction are misclassified as ash. It is also possible for mixtures of ash and sulfate to be misclassified as smoke. The V4.5 sulfate subtype accuracy is less than that for ash or smoke, with sulfates being misclassified as smoke about one-third of the time. However, because exceptionally tenuous layers are now assigned to the unclassified subtype and the revised algorithm levies more stringent criteria for identifying an aerosol as sulfate, it is more likely that layers labeled as this subtype are in fact sulfate compared to those assigned the sulfate/other classification in the previous data release.
The Cloud–Aerosol Lidar with Orthogonal Polarization (CALIOP), on-board the Cloud–Aerosol Lidar and Infrared Pathfinder Satellite Observations (CALIPSO) platform, is an elastic backscatter lidar that has been providing vertical profiles of the spatial, optical, and microphysical properties of clouds and aerosols since June 2006. Distinguishing between feature types (i.e., clouds vs. aerosol) and subtypes (e.g., ice clouds vs. water clouds and dust aerosols from smoke) in the CALIOP measurements is currently accomplished using layer-integrated measurements acquired by co-polarized (parallel) and cross-polarized (perpendicular) 532 nm channels and a single 1064 nm channel. Newly developed deep machine learning (DML) semantic segmentation methods now have the ability to combine observations from multiple channels with texture information to recognize patterns in data. Instead of focusing on a limited set of layer integrated values, our new DML feature classification technique uses the full scope of range-resolved information available in the CALIOP attenuated backscatter profiles. In this paper, one of the convolutional neural networks (CNN), SegNet, a fast and efficient DML model, is used to distinguish aerosol subtypes directly from the CALIOP profiles. The DML method is a 2D range bin-to-range bin aerosol subtype classification algorithm. We compare our new DML results to the classifications generated by CALIOP’s 1D layer-to-layer operational retrieval algorithm. These two methods, which take distinctly different approaches to aerosol classification, agree in over 60% of the comparisons. Higher levels of agreement are found in homogeneous scenes containing only a single aerosol type (i.e., marine, stratospheric aerosols). Disagreement between the two techniques increases in regions containing mixture of different aerosol types. The multi-dimensional texture information leveraged by the DML method shows advantages in differentiating between aerosol types based on their classification scores, as well as in distinguishing vertical distributions of aerosol types within individual layers. However, untangling mixtures of aerosol subtypes is still challenging for both the DML and operational algorithms.
16 November 2021 in Journal of Geophysical Research: Atmospheres
This study presents seasonal trends in marine tropospheric aerosol arising from the interplay between physical and biological processes in the Western Antarctic Peninsula (WAP). Remote sensing‐based studies focused on aerosol distribution and links to chlorophyll‐a concentration and sea ice predominantly use passive sensor retrievals of aerosol optical properties. However, these data are subject to cloud presence, signal uncertainties, and lack of retrievals in high latitude wintertime. To address these concerns, we have developed a method of quantifying tropospheric marine aerosol with the NASA Cloud‐Aerosol Lidar and Infrared Pathfinder Satellite Observation (CALIPSO), which we term marine aerosol optical depth (MAOD). MAOD may be retrieved in nighttime conditions of high‐latitude winter and is devoid of cloud contamination, thereby advancing upon prior aerosol optical depth (AOD) measurements linked with biogenic aerosol. To examine trends in tropospheric marine aerosol, we undertook a multi‐year remote sensing analysis in the Bellingshausen Sea from 2006 to 2018. A seasonal increase in MAOD was observed alongside a seasonal increase in chl‐a and sea ice melt, suggesting a biogenic component to aerosol presence. To the best of our knowledge, this study is also the first to further distinguish a late winter to early spring temporal MAOD signal, likely tied to an aerosol source from either venting of biogenic aerosol from breaks in sea ice or to sea spray/salt aerosol resulting from pulses in wind speed. Our work extends upon previous findings of AOD in polar environments and now more fully characterizes interactions during polar winter.
The Lidar on the Cloud-Aerosol Lidar and Infrared Pathfinder Satellite Observations (CALIPSO) mission, makes robust measurements of dust and has generated a record that is significant both seasonally and interannually. We exploit this record to determine the properties of dust emanating from different source types during sand and dust storms (SDS). We use the relevant browsed images to describe the characteristics of the SDS layers qualitatively and the average properties quantitatively. In particular, we examine dust optical depths, dust layer frequencies, and layer heights during three sandstorms. The data are screened by using standard CALIPSO quality-assurance flags, cloud aerosol discrimination (CAD) scores, overlying features, and layer properties. To evaluate the effects of the SDS origin, phenomena such as morphology, vertical extent, and size of the dust layers, we compare probability distribution functions of the layer integrated volume depolarization ratios, geometric depths, and integrated attenuated color ratios as a function of source type. This study includes 17 individual dust storm cases observed near the city of Kuwait from three categories of sources: single source, combined sources, and unspecified sources. The strongest dust storms occurred in the summer months. The dust layers reached the highest altitudes for the combined cases. The layer top altitudes were approximately 3 km for the SDS from unspecified and single sources whereas the layer top altitudes averaged 4.1 km for the SDS from combined sources. Particles from single and combined sources recorded depolarization ratios of 0.22 and 0.23, respectively, whereas the depolarization ratios of SDS particles from unspecified sources were noticeably lower at 0.17. SDS from single sources resulted in the highest average AOD (0.66) whereas the SDS from combined sources and unspecified sources resulted in AODs of 0.41 and 0.28, respectively. Winter dust layers were disorganized, especially at night when the boundary layer was weak. The most well-organized layers close to the ground were observed in the daytime during the summer months.