Agricultural tractors are highly fuel-consuming and soil/air polluting machines; thus, the introduction of new sustainable technologies, such as hybridization, can be very impactful for the development of electric hybrid agricultural tractors. These vehicles combine the classic internal combustion engine with an electric machine. This paper reports the modeling and simulation, conducted using a simulation software typically used for on-road vehicles, of a two-wheel-drive agricultural tractor in three different configurations: the conventional one, and the series and parallel electric-hybrid powertrains. The simulated task is the trailing of a “big square baler” during the process of straw wrapping and baling. The evaluation and the comparison of the fuel consumption, CO₂ emissions and the depth of discharge of the different configurations have been carried out to determine if it is possible to downsize the ICE while maintaining the same performance levels. This study highlights the fact that both the fuel consumption and the CO₂ emissions of series and parallel electric-hybrid agricultural tractors are ten times lower and five times lower than those of a traditional tractor, respectively. Furthermore, the presence of an electric machine allows a more precise speed profile tracking. This study points out that the hybridization of agricultural tractor powertrains is one of the most promising approaches for reducing pollutant emissions and fuel consumption.

Agricultural tractors are high fuel-consuming and polluting machines, thus the introduction of new sustainable technologies, as hybridization, can be very impactful for the development of electric hybrid agricultural tractors. These vehicles combine the classic internal combustion engine with an electric machine, to reduce the environmental impact and improve the efficiency. This paper reports the modeling and the simulation conducted, using a simulation software typically used for on-road vehicles, of a two wheel-drive agricultural tractor in three different configurations: the conventional one, the series and the parallel electric hybrid powertrain. The simulated task is the trailing of a big square baler during the process of straw wrapping and baling. The evaluation and the comparison of the fuel consumption, CO2 emissions and the depth of discharge of the different configurations has been carried out to determine if it is possible to downsize the ICE, maintaining the same performances. This study points out that the hybridization of agricultural tractors powertrains is one of the most promising approaches to reduce pollutant emissions and fuel consumption.

Nowadays, robust and efficient solid waste collection is crucial to motivate citizens to participate in the circular economy by sorting recyclable solid waste. Vocational vehicles, including garbage trucks, contribute significantly to CO${}_2$ emissions; therefore, it is strongly recommended, and in the European Union it is mandatory, to replace conventional-fuel-based garbage trucks with electric ones. For providing sustainable and energy-efficient solid waste collection with a heterogeneous fleet, in-depth mathematical computations are needed to support solving complex decision-making problems, including crew rostering and vehicle routing, because the distance and capacity of electric garbage trucks differ from conventional-fuel-based ones. However, the literature on solid waste collection using electric garbage trucks is still relatively scarce. The main contribution of this paper is developing an optimization problem for balancing travel distance assigned to each garbage truck of a heterogeneous fleet. The problem is based on specific requirements of the Municipal Solid Waste Management in Cracow, Poland, where the working time of routes is balanced and the total time of collection service can be minimized. For the problem, an MIP program was developed to generate optimal crew schedules, so that the hitherto network of segregated solid waste pickup nodes can be served using a heterogeneous fleet in which the share of electric garbage trucks is up to 30%. We study the impact of the changed composition of the fleet on modifications in crew rostering due to the shorter range of an electric vehicle compared to a conventional-fuel-based one.

This paper provides an analysis of a designed underground station infrastructure for vacuum tube high-speed trains for the planned mega transport hub in Poland. The potential of integrating the infrastructure of the station building with sealed low-pressure tubes system is analyzed. The Solidarity Transport Hub Poland is a planned mega hub to be located in Baranów Municipality, Poland, which is comprised of an airport, an airport city, a road, and railway infrastructure. It is to be integrated with the first route of vactrains in Poland. The aim of this paper is to design a hyperloop station building adequate for the advanced technology of low-pressure high-speed trains. Designing a hyperloop station is not trivial, due to technological aspects which have not been hitherto present in airport or railway planning and design, such as low-pressure zones or airlocks which determine possible passenger paths and evacuation roads. Both the mega airport and Polish hyperloop are in the planning stage, therefore, in this paper, available models and designs of the hyperloop station building and infrastructure are used in order to formulate recommendations for further development and identify critical issues related to the safety and reduction of passenger transit time. The main contribution of this paper is a model of the hyperloop station building which respects the principles of spatial planning and safety standards.

This paper critically assesses Business Process Management (BPM) education in Poland and provides evidence-based recommendations for improvement. Through a survey of 44 BPM educators, the study evaluates BPM lifecycle coverage, IT tool utilization, and incorporation of the Six Core Elements of BPM. The findings reveal a focus on process modeling and analysis, identifying gaps in the way the entire BPM lifecycle is addressed. Despite the utilization of various IT tools, there is a notable absence of coverage for emerging topics such as process mining, AI, and Robotic Process Automation. Only 12% of courses cover all Six Core Elements of BPM, and there is a critical gap in student education, which is the underrepresentation of the People and Culture elements. The paper concludes with a manifesto for greater alignment between academic education and industry needs through comprehensive BPM curricula, dedicated software tools, and more robust coverage of the strategic and governance aspects of BPM. This will bridge the gap between academic education and real-world BPM applications, so that graduates can be better prepared for the challenges of the modern business landscape, which can enhance the quality and effectiveness of BPM education, thereby aligning it with the evolving demands of the business environment and contributing to the growth and competitiveness of organizations in Poland.