Persistent scatterer interferometry (PSI) has the ability to acquire submeter-scale digital elevation model (DEM) and millimeter-scale deformation. A limitation to the application of PSI is that only single persistent scatterers (SPSs) are detected, and pixels with multiple dominant scatterers from different sources are discarded in PSI processing. Synthetic aperture radar (SAR) tomography is a promising technique capable of resolving layovers. In this paper, new approaches based on a novel two-tier network aimed at robust and efficient detection of persistent scatterers (PSs) are presented. The calibration of atmospheric phase screen (APS) and the detection of PSs can be jointly implemented in the novel two-tier network. A residue-to-signal ratio (RSR) estimator is proposed to evaluate whether the APS is effectively calibrated and to select reliable PSs with accurate estimation. In the first-tier network, a Delaunay triangulation network is constructed for APS calibration and SPS detection. RSR thresholding is used to adjust the first-tier network by discarding arcs and SPS candidates (SPSCs) with inaccurate estimation, yielding more than one main network in the first-tier network. After network adjustment, we attempt to establish reliable SPS arcs to connect the main isolated networks, and the expanded largest connected network is then formed with more manual structure information subtracted. Furthermore, rather than the weighted least square (WLS) estimator, a network decomposition WLS (ND-WLS) estimator is proposed to accelerate the retrieval of absolute parameters from the expanded largest connected network, which is quite useful for large network inversion. In the second-tier network, the remaining SPSs and all the double PSs (DPSs) are detected and estimated with reference to the expanded largest connected network. Compared with traditional two-tier network-based methods, more PSs can be robustly and efficiently detected by the proposed new approaches. Experiments on interferometric high resolution TerraSAR-X SAR images are given to demonstrate the merits of the new approaches.

The application of SAR tomography (TomoSAR) on the urban infrastructure and other man-made buildings has gained increasing popularity with the development of modern high-resolution spaceborne satellites. Urban tomography focuses on the separation of the overlaid targets within one azimuth-range resolution cell, and on the reconstruction of their reflectivity profiles. In this work, we build on the existing methods of compressive sensing (CS) and generalized likelihood ratio test (GLRT), and develop a multiple scatterers detection method named CS-GLRT to automatically recognize the number of scatterers superimposed within a single pixel as well as to reconstruct the backscattered reflectivity profiles of the detected scatterers. The proposed CS-GLRT adopts a two-step strategy. In the first step, an L1-norm minimization is carried out to give a robust estimation of the candidate positions pixel by pixel with super-resolution. In the second step, a multiple hypothesis test is implemented in the GLRT to achieve model order selection, where the mapping matrix is constrained within the afore-selected columns, namely, within the candidate positions, and the parameters are estimated by least square (LS) method. Numerical experiments on simulated data were carried out, and the presented results show its capability of separating the closely located scatterers with a quasi-constant false alarm rate (QCFAR), as well as of obtaining an estimation accuracy approaching the Cramer–Rao Low Bound (CRLB). Experiments on real data of Spotlight TerraSAR-X show that CS-GLRT allows detecting single scatterers with high density, distinguishing a considerable number of double scatterers, and even detecting triple scatterers. The estimated results agree well with the ground truth and help interpret the true structure of the complex or buildings studied in the SAR images. It should be noted that this method is especially suitable for urban areas with very dense infrastructure and man-made buildings, and for datasets with tightly-controlled baseline distribution.

With the increasing use of the strategy and group target attack method in the modern battlefield, multi-target inverse synthetic aperture radar (ISAR) imaging simultaneously with high efficiency draws more and more attention, which gives a promising prospect for aerospace target detection and recognition in the multi-target scenario. To overcome the shortcomings of traditional multi-target imaging with one beam at one pulse repetition time (PRT) based on phase array radar (PAR), this paper proposes a novel multi-target imaging waveform design method based on the newly full digital array radar (DAR). Firstly, we propose using radar waveform diversity with 2D orthogonality to realize multi-target ISAR imaging with high imaging quality and efficiency. Then, to meet the constant modulus requirement for maximizing the transmitting power, orthogonal frequency division multiplexing (OFDM) chirp theory is proposed to directly generate the transmit waveform instead of the traditional optimization method with the nonconvex problem for waveform design. Based on time-variant weighted and time diversity technology, a of group transmit waveforms is designed, which can form multiple beams simultaneously and make the signals arriving at different targets approximately orthogonal. Finally, simulations and experiments are carried out to demonstrate the effectiveness of the proposed method.

Effective utilization of airborne synthetic-aperture (Airborne SAR) imagery often requires precise location of each image pixel. Historically, the positioning of airborne SAR imagery either relies on the use of reliable reference points to determine the relative position of the image, or requires the precise motion information of the aircraft and the characteristics of the SAR data collection system as input to determine the absolute position of the image. However, for many applications, the accuracy of traditional positioning methods is not high due to the challenge in obtaining the accurate geographic positions of reliable reference points and the inaccuracy of the recorded aircraft motion information. This study introduces an airborne SAR image planar positioning approach based on the premise that the systematic positioning error of the dual-view airborne SAR images are relatively consistent. The suggested planar positioning method applies the positioning auxiliary parameters of the initial ground-range airborne SAR image to ascertain the transformation relationship between the target’s initial geographic position and pixel position, and it then uses the equivalent equation for the position of the homologue point to assess the systematic positioning error of the SAR image and determine the geographic position of a pixel in a digital SAR image. This approach has advantages over previous techniques in that it requires no precise geographic position information of the ground reference points, and on the basis of using the RD model to accomplish coarse positioning of four corners of SAR image, it no longer needs aircraft trajectory data. Tests were conducted using two airborne SAR images actually captured, and the experimental results indicate that the proposed method can achieve high precision planar positioning of dual-view airborne SAR images. Error sources are analyzed and recommendations are given to improve image positioning accuracy in future airborne SARs.

Spaceborne synthetic aperture radar (SAR) has been treated as a weather independent system for a long time. However, with the development of advanced SAR configurations, e.g., high resolution, bistatic, geosynchronous (GEO), the influence of tropospheric propagation error, which strongly depends on the weather, has begun to receive attention. In this paper, we focus on the effect of deterministic background tropospheric delay (BTD) during the image formation of GEO SAR. First, the decorrelation problems caused by the spatial variation and BTD are presented. Second, by combining with the SAR imaging geometry, the BTD error is decomposed as constant error, spatially variant error, and time variant error, the influences of which are analyzed under different circumstances. Third, an imaging method starting from the meteorological parameters and the GEO SAR systematic parameters is proposed to deal with the decorrelation problems. Finally, simulations with the dot-matrix targets are performed to validate the imaging method.

The spaceborne P-band fully polarimetric synthetic aperture radar (SAR) working system is highly susceptible to the scintillation effects induced by ionospheric irregularities due to its low carrier frequency. The scintillation phase error (SPE) is a dominant factor that leads to azimuth decorrelation. The aperture-dependent and spatial-varying characteristics of the SPE promote the complexity of the SPE estimation and compensation. In this paper, a methodology is described that compensates the SPE by estimating the Faraday rotation (FR) angle from fully polarimetric SAR data. The multi-aperture scheme is adopted, including the sub-aperture FR estimation, multi-aperture splicing, and overall compensation, to take the complicated characteristics of the aperture-dependent and spatial-varying SPE into account. The methodology is finally validated on simulated data derived from the airborne P-band SAR real data, and compared with an existing method. The new method does not need prior knowledge of the ionospheric height. Furthermore, its performance is investigated in relation to several key factors in different simulation conditions.