With the increasing use of the strategy and group target attack method in the modern battlefield, multi-target inverse synthetic aperture radar (ISAR) imaging simultaneously with high efficiency draws more and more attention, which gives a promising prospect for aerospace target detection and recognition in the multi-target scenario. To overcome the shortcomings of traditional multi-target imaging with one beam at one pulse repetition time (PRT) based on phase array radar (PAR), this paper proposes a novel multi-target imaging waveform design method based on the newly full digital array radar (DAR). Firstly, we propose using radar waveform diversity with 2D orthogonality to realize multi-target ISAR imaging with high imaging quality and efficiency. Then, to meet the constant modulus requirement for maximizing the transmitting power, orthogonal frequency division multiplexing (OFDM) chirp theory is proposed to directly generate the transmit waveform instead of the traditional optimization method with the nonconvex problem for waveform design. Based on time-variant weighted and time diversity technology, a of group transmit waveforms is designed, which can form multiple beams simultaneously and make the signals arriving at different targets approximately orthogonal. Finally, simulations and experiments are carried out to demonstrate the effectiveness of the proposed method.

Distributed radar array brings several new forthcoming advantages in aerospace target detection and imaging. The two-dimensional distributed array avoids the imperfect motion compensation in coherent processing along slow time and can achieve single snapshot 3D imaging. Some difficulties exist in the 3D imaging processing. The first one is that the distributed array may be only in small amount. This means that the sampling does not meet the Nyquist sample theorem. The second one refers to echoes of objects in the same beam that will be mixed together, which makes sparse optimization dictionary too long for it to bring the huge computation burden in the imaging process. In this paper, we propose an innovative method on 3D imaging of the aerospace targets in the wide airspace with sparse radar array. Firstly, the case of multiple targets is not suitable to be processed uniformly in the imaging process. A 3D Hough transform is proposed based on the range profiles plane difference, which can detect and separate the echoes of different targets. Secondly, in the subsequent imaging process, considering the non-uniform sparse sampling of the distributed array in space, the migration through range cell (MTRC)-tolerated imaging method is proposed to process the signal of the two-dimensional sparse array. The uniformized method combining compressed sensing (CS) imaging in the azimuth direction and matched filtering in the range direction can realize the 3D imaging effectively. Before imaging in the azimuth direction, interpolation in the range direction is carried out. The main contributions of the proposed method are: (1) echo separation based on 3D transform avoids the huge amount of computation of direct sparse optimization imaging of three-dimensional data, and ensures the realizability of the algorithm; and (2) uniformized sparse solving imaging is proposed, which can remove the difficulty cause by MTRC. Simulation experiments verified the effectiveness and feasibility of the proposed method.

The ground moving-target indication (GMTI) technique can detect civil and military moving targets, which means that this technique has received much attention. Strong clutter background suppression is one of the critical problems in this application. However, the detection performance in heterogeneous environment can be degraded due to the inaccurate estimation of the clutter covariance matrix (CCM). In this paper, we propose a robust GMTI method using a spaceborne dual-platform synthetic aperture radar (SAR) system, which can obtain highly accurate CCM in nonuniform clutter. Firstly, the accurate CCM is estimated based on the SAR image obtained by the former platform. Then, space–time adaptive processing (STAP) is carried out using the obtained the CCM. Finally, the detection threshold is set according to the estimated CCM and detection is executed accurately. Compared with the traditional CCM estimation method in STAP using the clutter nearby the cell under test, this method directly estimates the CCM using the clutter of the cell under test, which can avoid CCM estimation mistakes in heterogeneous clutter environment. The clutter can be whitened and depressed more effectively. Additionally, with the accurate threshold acquired from the CCM, the detection probability can be effectively improved under a certain false-alarm criterion. Based on simulation data, GMTI experiments in a heterogeneous environment such as clutter with strong pollution, junction zone of hot and cold clutter, and clutter with nonuniform power are carried out; the results show that the moving targets can be effectively detected with the proposed method.

Keywords: Envelope Alignment, Phase Compensation, ISAR, Joint Processing Range envelope alignment and phase compensation are spilt into two isolated parts in the classical methods of translational motion compensation in Inverse Synthetic Aperture Radar (ISAR) imaging. In classic method of the rotating object imaging, the two reference points of the envelope alignment and the Phase Difference (PD) estimation are probably not the same point, making it difficult to uncouple the coupling term by conducting the correction of Migration Through Resolution Cell (MTRC). In this paper, an improved approach of joint processing which chooses certain scattering point as the sole reference point is proposed to perform with utilizing the Prominent Point Processing (PPP) method. With this end in view, we firstly get the initial image using classical methods from which a certain scattering point can be chose. The envelope alignment and phase compensation using the selected scattering point as the same reference point are subsequently conducted. The keystone transform is thus smoothly applied to further improve imaging quality. Both simulation experiments and real data processing are provided to demonstrate the performance of the proposed method compared with classical method.