Geoff West

Dr. Geoff West


Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
25 November 2020 in Metals
Verified
Journal Article
Open access
PDF file
CYCHING KIAT YONG
CHING KIAT YONG
Gregory GibbonsGregory Gibbons
Gregory Gibbons
CWChow Cher Wong
Chow Cher Wong
GWGeoff West
Geoff West
This paper reviews state of the art additive manufactured (AM) IN718 alloy intended for high-temperature applications. AM processes have been around for decades and have gained traction in the past five years due to the huge economic benefit this brings to manufacturers. It is crucial for the scientific community to look into AM IN718 applicability in order to see a step-change in production. Microstructural studies reveal that the grain structure plays a significant role in determining the fatigue lifespan of the material. Controlling IN718 respective phases such as the ϒ’’, δ and Laves phase is seen to be crucial. Literature reviews have shown that the mechanical properties of AM IN718 were very close to its wrought counterpart when treated appropriately. Higher homogenization temperature and longer ageing were recommended to dissolve the damaging phases. Various surface enhancement techniques were examined to find out their compatibility to AM IN718 alloy that is intended for high-temperature application. Laser shock peening (LSP) technology stands out due to the ability to impart low cold work which helps in containing the beneficial compressive residual stress it brings in a high-temperature fatigue environment.

15 November 2020 in Metallurgical and Materials Transactions A
Verified
Journal Article
Open access
PDF file
SJSharhid Jabar
Sharhid Jabar
JSJohn A. Siefert
John A. Siefert
MSMartin Strangwood
Martin Strangwood
GWGeoff West
Geoff West
The quantification of key microstructural parameters as a function of aging or creep exposure time is commonplace in the assessment of 9Cr Creep Strength Enhanced Ferritic (CSEF) power-plant steels. In these studies, the sample is either assumed chemically homogenous at the micro-scale or that a material average will be achieved by collecting enough images at random locations. In this paper, the micro-scale chemical homogeneity of two ex-service boiler components, a pipe and a forging, are quantitatively assessed using high sensitivity chemical mapping from µ-XRF. The compositional variation was as expected most pronounced in the larger elements Mo and Nb, where a > 20 pct difference in composition was present between positively and negatively segregated areas. The effect of this micro-segregation on local variations in Laves phase particle characteristics was investigated using SEM images. This showed a factor of two difference in the number of particles and the area coverage between positively and negatively Mo-segregated regions. This result was consistent with the thermodynamic equilibrium predictions of the phase content based on the observed level of segregation.

12 October 2020 in Metallurgical and Materials Transactions A
Verified
Journal Article
Open access
PDF file
MBMaria Balart
Maria Balart
XHXinjiang Hao
Xinjiang Hao
SMSamuel Marks
Samuel Marks
GWGeoff West
Geoff West
Marc WalkerMarc Walker
Marc Walker
CDClaire Davis
Claire Davis
Powders produced by air-melted gas atomization (AMGA) and vacuum induction gas atomization (VIGA) from Ti-V microalloyed 316L and Al-V microalloyed 17-4PH stainless steels along with their feedstock material and Hot Isostatically Pressed (HIP’d) products have been examined. Inclusion characteristics and development through process along with changes in grain size have been characterized. The main findings are that a thin oxide film forms on the powder surface, thicker for the 316L powder than the 17-4PH powder as indicated by XPS analysis of selected powder precursors, and large inclusions (predominantly oxides) are also observed on the 316L powder. This results in a high number of inclusions, including more complex two-phase inclusions, on the prior particle boundaries in the HIP’d material. Grain growth occurs during HIPping of the 316L powders with some evidence of inclusions locally pinning boundaries. In the vacuum-melted powder, smaller Ti-rich inclusions are present which give more grain boundary pinning than in the air-melted powder where Ti was lost from the material during melting. Consideration has also been made to determine the variation of Ti and V microalloying elements and residual Cu through processing. It was found that Ti was lost during air melting but partly retained after vacuum melting leading to the presence of fine and complex Ti-containing precipitates which provided grain boundary pinning during HIPping and heat treatment. V was retained in the melt by the use of both AMGA and VIGA processes, and therefore available for precipitation during HIPping. Residual Cu was retained during both air and vacuum melting and was associated with Mn S and Mn O S inclusions overwhelmingly outweighing that of Mn O inclusions in the two HIP’d 316L samples.

29 July 2024 in ChemRxiv
Verified
Preprint
Open access
PDF file
XXXiangdong Xu
Xiangdong Xu
WHWilliam Howland
William Howland
DMDaniel Martín-Yerga
Daniel Martín-Yerga
CCCole Cadaram
Cole Cadaram
DHDeiaa Harraz
Deiaa Harraz
YSYogesh Surendranath
Yogesh Surendranath
Thermochemical redox catalysis is critical to a wide array of key chemical transformations and is known to be sensitive to catalyst surface structure. Yet there exist limited operando tools for quantitatively imaging heterogeneities in catalytic rate across a surface. Since many thermochemical redox reactions can proceed via the coupling of electrochemical half-reactions, electrochemical microscopies can, in principle, be used to image heterogeneities in thermochemical redox catalysis. Herein, we develop a methodology for imaging variations in the rate of thermochemical redox catalysis using electrochemical microscopy. Using Pt-catalyzed aerobic oxidation of formic acid oxidation as a test reaction, scanning electrochemical cell microscopy (SECCM) imaging reveals grain-dependent variations in catalytic rate for the underlying oxygen reduction and formic acid oxidation half-reactions, implying inter-grain cooperativity during ensemble thermochemical catalysis via lateral current flows that galvanically couple disparate active sites. Tafel analysis of current-potential profiles in the presence of both reactants reveals the nature of cross-talk between the two half-reactions and provides quantitative spatially-resolved images of catalytic rates for the net thermochemical reaction. These studies establish a methodology for using electrochemical microscopy to image thermochemical catalysis and expose how electrochemical half-reactions couple and interact across surface structures to enable redox transformations.

3 February 2025 in Materials
Verified
Journal Article
Open access
PDF file
CCChun-Liang Chen
Chun-Liang Chen
FHFang-Yu Huang
Fang-Yu Huang
GWGeoff West
Geoff West
This study investigates the effects of nano-oxide dispersoids on microstructural evolution, phase formation, and mechanical properties of W-Mo-Ti alloys reinforced with AlCoCrFeNi2.1 during mechanical alloying. An EBSD/EDS analysis confirmed the formation of different phases, including the tungsten matrix, FCC reinforcement phase, Al2O3, and (Al,Cr) oxide. Y2O3 particles played a crucial role in refining the microstructure, promoting a uniform dispersion of the reinforcement phase and oxide particles in the tungsten model alloys. Mechanical testing demonstrates that the Y2O3-containing alloy exhibits improved hardness with prolonged milling, attributed to the refinement in the microstructure. In contrast, the Y2O3-free alloy shows reduced hardness due to the agglomeration of reinforcement phases surrounded by an (Al,Cr) oxide layer. The model tungsten alloys exhibit brittle behavior in compression tests, which can be attributed to the presence of (Al,Cr) oxide layers weakening the interfacial bonding and limiting plastic deformation.

12 May 2025 in ChemRxiv
Verified
Preprint
Open access
PDF file
SVSundeep Vema
Sundeep Vema
JGJames Gott
James Gott
HYHao Yin
Hao Yin
ARAshley Roach
Ashley Roach
GWGeoff West
Geoff West
CGClare Grey
Clare Grey
Solid-state batteries promise high energy storage with enhanced safety but suffer from contact loss at the lithium (Li) metal anode-solid electrolyte interface as Li is stripped into the ionically-conducting solid electrolyte. Contrary to the prevailing view that the contact loss arises from void formation in the Li metal at this interface, we demonstrate, in cells with garnet electrolytes, that it instead arises from the deposition of insulating impurities from within the electrode onto the interface. These impurities form a porous layer, and an imposed stack pressure is required for Li to creep through the pores of this layer. This proposed mechanism is supported by our experimental observations that no voids are present on the interface and by our finding that contact loss persists at stack pressures that are sufficiently high to collapse any voids in the Li. Theoretical models developed using the impurity deposition mechanism are in excellent agreement with measurements. This finding has significant implications for improving the design of all solid-state batteries including the development of anode-free cells for which impurities within the electrode are expected to be substantially reduced.