Maria Balart

Dr. Maria Balart

BCAST Brunel University, London, UK

Research Focus & Metrics

Academic Career Length

13Years (2014-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
30 May 2016 in Metals
Verified
Journal Article
Open access
PDF file
MBMaria Balart
Maria Balart
JPJayesh Patel
Jayesh Patel
Zhongyun FanZhongyun Fan
Zhongyun Fan
This paper reports the current status of Mg melt protection in view to identify near-future challenges, but also opportunities, for Mg melt protection of Mg-Al based alloys. The goal is to design and manufacture sustainable Mg alloys for resource efficiency, recycling and minimising waste. Among alternative cover gas technologies for Mg melt protection other than SF6: commercially available technologies containing―HFC-134a, fluorinated ketone and dilute SO2―and developed technologies containing solid CO2, BF3 and SO2F2, can potentially produce toxic and/or corrosive by-products. On the other hand, additions of alkaline earth metal oxides to Mg and its alloys have developed a strong comparative advantage in the field of Mg melt protection. The near-future challenges and opportunities for Mg-Al based alloys include optimising and using CO2 gas as feedstock for both melt protection and grain refinement and TiO2 additions for melt protection.

16 April 2015 in International Journal of Cast Metals Research
Verified
Journal Article
Closed access
MBMaria Balart
Maria Balart
JPJayesh Patel
Jayesh Patel
FGF. Gao
F. Gao
Zhongyun FanZhongyun Fan
Zhongyun Fan
The effects of additions of P and Ag, as well as the de-embrittling elements of copper—B, Mg, Ca, Ti and Zr—in concentrations of 0.085–0.5 wt-% to give some variations in contents within and outside of the DHP specification limits on grain size structure have been investigated under TP-1 casting conditions. Columnar to equiaxed transition has been observed with combined additions of 0.1%Ag–0.069%P; 0.4%Zr–0.039%P and with an addition of 0.5%B and, to a lesser extent, with an addition of 0.1%P and with combined additions of 0.4%Ag–0.030%P and 0.085%Ti–0.039%P. In contrast, 0.085% additions of Mg, Ca and Zr to DHP-Cu as well as 0.4%Ti to Cu failed to achieve grain refinement. Excessive coarsening of equiaxed grains has been observed with additions of 0.085–0.17%B, 0.4%Mg, 0.4%Ca and 0.5%P. Those results suggest making the maximum additions of P of 400 ppm and of Ag of 150 ppm to DHP-Cu for grain size control.

7 August 2019 in Metallography, Microstructure, and Analysis
Verified
Journal Article
Open access
PDF file
MBMaria Balart
Maria Balart
FGFeng Gao
Feng Gao
JPJayesh Patel
Jayesh Patel
FMFabio Miani
Fabio Miani
By utilizing data from the literature, we examine the effects of superheat and solute additions on the grain size (as measured by columnar grain length) in binary copper alloys. Our investigation provides support for an Arrhenius-like behavior of the superheat on the grain size. We also find a correlation between the columnar grain length at a constant degree of superheat and the variation of the reciprocal of the true growth restriction factor (1/Q) with P, Mg, Mn, Pb, and Sn solute additions to be a power of law of 1/3, which gave a better fit than a linear one.

27 April 2014 in International Journal of Cast Metals Research
Verified
Journal Article
Closed access
MBMaria Balart
Maria Balart
Zhongyun FanZhongyun Fan
Zhongyun Fan
The surface of stagnant Mg–Al based alloy melts has been exposed to air: AZ31 alloy, at 640°C for 10 min and at 650°C for 10 s; AM60B alloy at 650°C for 10 s and AJ62 alloy at 690°C for 10 s. After oxidising, the samples were sand quenched. The macroscopic morphology of the surfaces exhibited regions of non-nodular growth (in a layer manner) and regions of nodular growth. The microscopic morphology of the surfaces and the nature of the surface reaction products have been analysed using field emission gun (FEG)–SEM and X-ray diffraction (XRD) techniques, respectively. FEG–SEM results revealed that all these morphologies, namely, sponge-like, nodular and layer, were porous and, therefore, were non-protective with respect to evaporation and oxidation of Mg, Zn and Sr. XRD results indicated that in all these regions, MgO was the main oxidation product along with traces of AlN. Additionally, traces of ZnO were found in the non-nodular and nodular regions of AZ31 alloy containing 1·16 wt-%Zn for both oxidation conditions and, in the nodular region of AM60B alloy containing 0·05 wt-%Zn, relative to a more vigorous reaction condition. This trace ZnO content reflected the Zn levels of the three magnesium alloys investigated and the oxidation conditions. Traces of SrO were found in the nodular region of AJ62 alloy containing 2·5 wt-%Sr, relative to a more vigorous reaction condition.

4 May 2015 in International Journal of Cast Metals Research
Verified
Journal Article
Closed access
MBMaria Balart
Maria Balart
JPJayesh Patel
Jayesh Patel
Zhongyun FanZhongyun Fan
Zhongyun Fan
The viability of grain refining phosphorus deoxidised, high residual phosphorus Cu (DHP-Cu) by particle inoculation through the formation of in situ Zr, Ti, Nb, La, Ce, Gd and Nd oxide particles, additions of WC and NbB2 particles as well as additions of Ti+B, Zr+B, Al+B and Ca+B with the purpose of forming in situ boride particles have been investigated under TP-1 casting conditions. Nominal additions of P in the range of 300–690 wt ppm and of Ag of 150 wt ppm have also been explored. In comparison, it appears that it is more difficult to grain refine DHP-Cu by particle inoculation than it is by the combined addition of P+Ag solute elements to a residual content of 396 ppm P and 143 ppm Ag (and having very low contents of Ti, Zr, Al, Ca and B microalloying elements) for the conditions studied.

12 October 2020 in Metallurgical and Materials Transactions A
Verified
Journal Article
Open access
PDF file
MBMaria Balart
Maria Balart
XHXinjiang Hao
Xinjiang Hao
SMSamuel Marks
Samuel Marks
GWGeoff West
Geoff West
Marc WalkerMarc Walker
Marc Walker
CDClaire Davis
Claire Davis
Powders produced by air-melted gas atomization (AMGA) and vacuum induction gas atomization (VIGA) from Ti-V microalloyed 316L and Al-V microalloyed 17-4PH stainless steels along with their feedstock material and Hot Isostatically Pressed (HIP’d) products have been examined. Inclusion characteristics and development through process along with changes in grain size have been characterized. The main findings are that a thin oxide film forms on the powder surface, thicker for the 316L powder than the 17-4PH powder as indicated by XPS analysis of selected powder precursors, and large inclusions (predominantly oxides) are also observed on the 316L powder. This results in a high number of inclusions, including more complex two-phase inclusions, on the prior particle boundaries in the HIP’d material. Grain growth occurs during HIPping of the 316L powders with some evidence of inclusions locally pinning boundaries. In the vacuum-melted powder, smaller Ti-rich inclusions are present which give more grain boundary pinning than in the air-melted powder where Ti was lost from the material during melting. Consideration has also been made to determine the variation of Ti and V microalloying elements and residual Cu through processing. It was found that Ti was lost during air melting but partly retained after vacuum melting leading to the presence of fine and complex Ti-containing precipitates which provided grain boundary pinning during HIPping and heat treatment. V was retained in the melt by the use of both AMGA and VIGA processes, and therefore available for precipitation during HIPping. Residual Cu was retained during both air and vacuum melting and was associated with Mn S and Mn O S inclusions overwhelmingly outweighing that of Mn O inclusions in the two HIP’d 316L samples.