Typical small shovel logging system, using manual felling and extraction by small crawler excavator with grapple and crawler carriers, is the predominant logging method in the Republic of Korea, due to the associated high productivity. The trails with ground pressure and one more passes of the shovel and carriers may lead to soil compaction. However, impacts of these bunching-extraction technologies on physical and hydrological properties of soils are not well known. The main objectives of this study were to: (1) determine the bulk density, porosity, and saturated hydraulic conductivity of soils in logging operation areas with three different disturbance types (i.e., undisturbed areas [UAs], bladed trails [BTs], and skid trails [STs]), and (2) compare soil compaction between these disturbance types. The most intense compaction occurred within BTs and STs, with increased bulk density and reduced porosity and hydraulic conductivity. Soil bulk density increased by 27-53% at all depths in BTs and STs compared to UAs, while porosity decreased by 23-49%. On average, saturated hydraulic conductivity at depths of 0-20 cm decreased from 337.5 mm h-1 to 30.5 mm h-1 in the most compacted sections of BTs and STs. Skid trails, which are characterized by trail construction and frequent vehicle movement, also caused greater impacts on soil compaction than BTs. This study provides useful insights to aid forest consultants and field managers in planning more environmentally sound mechanized logging operations.

Forests are well known to control soil erosion and severe flooding. In the Democratic People's Republic of Korea (North Korea), deforestation was estimated at 20% between 1997 and 2014. This decline was mainly reflective of improper land use practices on steep slopes. Intensive deforestation and inappropriate land management can lead to severe soil erosion. The objective of this study was to describe the regional soil erosion severity in North Korea using the Revised Universal Soil Loss Equation (RUSLE) model coupled with a GIS technique. This model is widely being used to assess the potential mean annual soil erosion under different rainfall, soil characteristics, slope, and land use conditions. The results showed that the average annual rate of soil loss was estimated to be 15.8 tonnes ha⁻¹ yr⁻¹. Regionally, Nampo city is the most vulnerable region to soil erosion (55.1 tonnes ha⁻¹ yr⁻¹), followed by Hwanghaebuk-do (30.5 tonnes ha⁻¹ yr⁻¹), due to rapid land development. Denuded lands, which are estimated at around 6.5% of the total area, are predicted to have contributed 192.1 million tonnes yr⁻¹ to the country's soil erosion. Participatory agroforestry and reforestation were found to be practical solutions to reduce soil erosion, particularly on degraded landscapes, and improve people's farm-based livelihoods.

In South Korea, logs for low-value products, such as pulpwood and fuelwood, are primarily extracted from harvest sites and transported to roadside or landing areas using small shovels. Previous studies on log extraction, however, have focused on cable yarding operations with the goal of improving productivity on steep slopes and inaccessible sites, leaving small-shovel operations relatively unexamined. Therefore, the main objectives were to determine small-shovel extraction productivity and costs and to evaluate the impact of related variables on productivity. In addition, we developed a model to estimate productivity under various site conditions. The study took place in 30 case study areas; each area has trees with stems at a diameter at breast height ranging from 18 to 32 cm and a steep slope (greater than 15%). The areas ranged from 241 to 1129 trees per hectare, with conifer, deciduous, and mixed stands. Small-shovel drives ranged from 36 to 72 m per extraction cycle from stump to landing. The results indicated that the mean extraction productivity of small-shovel operations ranged between 2.44 to 9.85 m³ per scheduled machine hour (including all delays). At the forest level, the estimated average stump-to-forest road log production costs were US $4.37 to 17.66/m³. Small-shovel productivity was significantly correlated with stem size (diameter at breast height and tree volume) and total travelled distance (TTD). However, a Pearson’s correlation analysis indicated that stand density and slope did not have a significant effect on productivity. Our findings provide insights into how stem size and TTD influence small shovel performance and the predictive ability of productivity. Further, this information may be a valuable asset to forest planners and managers.

Open pile burning (OPB) forest residues have been limited due to several concerns, including atmospheric pollution, risk of fire spread, and weather conditions restrictions. Air Curtain Burner (ACB) systems could be an alternative to OPB and can avoid some of the negative effects that may result from OPB. The main objective was to compare the burning consumption rates and costs of two types of ACB machines, the S-220 and BurnBoss. In addition, we tested a hand-pile burning (HPB) consumption rate for a comparison with BurnBoss unit. The S-220’s burning consumption rates ranged between 5.7 and 6.8 green metric ton (GmT)/scheduled machine hour (SMH) at a cost between US $12.8 and US $10.8/GmT, respectively. Costs were 70% higher when using the BurnBoss unit. Burning residue consumption rates and cost of disposal were considerably different: they were highly dependent on machine size, species, and fuel age of forest residues. Particularly, BurnBoss test burned over 40% more than HPB method and produced clean burn by airflow. The results from this study suggest that ACBs can be a useful tool to dispose of forest residues piled in many forests areas with less concerns of air quality and fire escape risks.

The forestry industry poses a higher risk of occupational accidents than other sectors, and understanding the occurrence and characteristics of injuries and fatalities is crucial for improving the safety and health of workers and establishing future strategies. In South Korea, although occupational injuries have declined since 2010, the number of occupational accidents in forestry remains higher than that in other sectors. Occupational injuries and fatalities present considerable challenges, and thus, our objective was to analyze and compare forestry accidents between 2010 and 2020. The results indicate that the highest average number of injuries occurred among workers older than 51 years and those with less than 6 months of experience. Timber harvesting and silviculture are among the most dangerous operations in forestry. Based on the analyzed dataset, amputation and laceration injuries, as well as slip and trip injuries, were the most common, accounting for 29.2% and 22.3% of total annual occupational accidents, respectively. These results may be explained by the labor-intensive, steep terrain operations in forestry. Our findings represent an essential resource for improving worker safety and health.

In ground-based harvesting, machine traffic can cause soil physical disturbances including excessive compaction, the displacement of the soil surface and topsoil, and rutting. These impacts can indirectly hamper seedling survival and tree growth because of reduced soil permeability and root growth. However, the extent of soil disturbance in mechanized row thinning by harvester and forwarder systems in South Korea is unclear. Therefore, our objectives were to determine the impacts of two types of harvesters, soil textures, and extraction methods on soil compaction and rutting in a Korean Pine stand. The results showed that the machine passes affected soil disturbances. The soil bulk density inside the tracks (at 0–10 and 10–20 cm soil depths) after harvester passes (wheeled vs. tracked) increased by 17 and 27% and 30 and 20%, respectively. The largest impact was recorded for the forwarding track and significant differences were observed between the track and reference locations. Furthermore, the rutting depth in the forwarding trails was significantly higher than in the harvester trails. Thus, the application of a brush mat on harvester and forwarder trails may reduce machine-induced soil compaction. These results provide useful information to help forest engineers and field managers design environmentally sound ground-based harvesting operations.