Dmitry Popov

Mr. Dmitry Popov

orcid

Research Focus & Metrics

Academic Career Length

10Years (2017-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
14 October 2020 in Applied Sciences
Verified
Journal Article
Open access
PDF file
Alexander SafonovAlexander Safonov
Alexander Safonov
EMEvgenii Maltsev
Evgenii Maltsev
SCSvyatoslav Chugunov
Svyatoslav Chugunov
ATAndrey Tikhonov
Andrey Tikhonov
Stepan KonevStepan Konev
Stepan Konev
Iskander AkhatovIskander Akhatov
Iskander Akhatov
3D printing allows the fabrication of ceramic implants, making a personalized approach to patients’ treatment a reality. In this work, we have tested the applicability of the Function Representation (FRep) method for geometric simulation of implants with complex cellular microstructure. For this study, we have built several parametric 3D models of 4 mm diameter cylindrical bone implant specimens of four different types of cellular structure. The 9.5 mm long implants are designed to fill hole defects in the trabecular bone. Specimens of designed ceramic implants were fabricated at a Ceramaker 900 stereolithographic 3D printer, using a commercial 3D Mix alumina (Al2O3) ceramic paste. Then, a single-axis compression test was performed on fabricated specimens. According to the test results, the maximum load for tested specimens constituted from 93.0 to 817.5 N, depending on the size of the unit cell and the thickness of the ribs. This demonstrates the possibility of fabricating implants for a wide range of loads, making the choice of the right structure for each patient much easier.

1 December 2020 in Computer-Aided Design
Verified
Journal Article
Closed access
DPDmitry Popov
Dmitry Popov
EMEvgenii Maltsev
Evgenii Maltsev
OFOleg Fryazinov
Oleg Fryazinov
APAlexander Pasko
Alexander Pasko
IAIskander Akhatov
Iskander Akhatov

23 July 2021 in Applied Sciences
Verified
Journal Article
Open access
PDF file
EMEvgenii Maltsev
Evgenii Maltsev
DPDmitry Popov
Dmitry Popov
SCSvyatoslav Chugunov
Svyatoslav Chugunov
APAlexander Pasko
Alexander Pasko
Iskander AkhatovIskander Akhatov
Iskander Akhatov
Complex 3D objects with microstructures can be modelled using the function representation (FRep) approach and then manufactured. The task of modelling a geometric object with a sophisticated microstructure based on unit cell repetition is often too computationally expensive for CAD systems. FRep provides efficient tools to solve this problem. However, even for FRep the slicing step required for manufacturing can take a significant amount of time. An accelerated slicing algorithm for FRep 3D objects is proposed in this paper. This algorithm allows the preparation of FRep models for 3D printing without surface generation stage. The spatial index is employed to accelerate the slicing process. A novel compound adaptive criterion and a novel acceleration criterion are proposed to speed up the evaluation of the defining function of an FRep object. The use of these criteria is significantly reducing the computational time for contour construction during the slicing process. The K-d tree and R-tree data structures are used as spatial indexes. The performance of the accelerated slicing algorithm was tested. The contouring time was reduced 100-fold due to using the novel compound adaptive criterion with the novel acceleration criterion.

12 August 2021 in Applied Sciences
Verified
Journal Article
Open access
PDF file
DPDmitry Popov
Dmitry Popov
YKYulia Kuzminova
Yulia Kuzminova
EMEvgenii Maltsev
Evgenii Maltsev
Stanislav EvlashinStanislav Evlashin
Stanislav Evlashin
Alexander SafonovAlexander Safonov
Alexander Safonov
APAlexander Pasko
Alexander Pasko
Additive manufacturing erases the distance between design ideas and finished parts. However, designers must use several software tools to use these advantages. Moreover, these tools operate with different representations of geometry. This paper describes the architecture of a new CAD/CAM system that uses only the function representation of the geometry (FRep). It provides all widely used design operations and allows an engineer to employ robust and efficient topology optimization algorithms. The developed CAD/CAM system consists of 3D modeling, simulation, topology optimization, and direct manufacturing modules. We successfully printed designed parts and performed mechanical tests of printed parts. The results of tests show good agreement with simulation data. The system makes it possible to create structures with the desired properties in a fast and flexible way. The proposed approach significantly helps in designing additive manufacturing process and saves time for its users.

24 December 2017 in Scientific Visualization
Verified
Journal Article
Closed access
ANA.P. Nelyubin
A.P. Nelyubin
TGT.P. Galkin
T.P. Galkin
AGA.A. Galaev
A.A. Galaev
DPDmitry Popov
Dmitry Popov
SMSergey Yurevich Misyurin
Sergey Yurevich Misyurin
VPV.V. Pilyugin
V.V. Pilyugin

29 March 2018 in Scientific Visualization
Verified
Journal Article
Closed access
TGT. Galkin
T. Galkin
MGM. Grigoryeva
M. Grigoryeva
AKA. Klimentov
A. Klimentov
TKT. Korchuganova
T. Korchuganova
IMI. Milman
I. Milman
MTM. Titov
M. Titov