Yulia Kuzminova

Dr. Yulia Kuzminova


Research Focus & Metrics

Academic Career Length

13Years (2014-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 March 2021 in Materials Science and Engineering: A
Verified
Journal Article
Closed access
WZWenrui Zhao
Wenrui Zhao
JHJae-Kyung Han
Jae-Kyung Han
YKYulia Kuzminova
Yulia Kuzminova
Stanislav EvlashinStanislav Evlashin
Stanislav Evlashin
AZAlexander P. Zhilyaev
Alexander P. Zhilyaev
MKMegumi Kawasaki
Megumi Kawasaki

25 November 2021 in Materials
Verified
Journal Article
Open access
PDF file
AFAlexey Fedorenko
Alexey Fedorenko
BFBoris Fedulov
Boris Fedulov
YKYulia Kuzminova
Yulia Kuzminova
Stanislav EvlashinStanislav Evlashin
Stanislav Evlashin
OSOleg Staroverov
Oleg Staroverov
Iskander AkhatovIskander Akhatov
Iskander Akhatov
In the presented study, LPBF 316L stainless steel tensile specimens were manufactured in three different orientations for the analysis of anisotropy. The first set of specimens was built vertically on the build platform, and two other sets were oriented horizontally perpendicular to each other. Tensile test results show that mean Young’s modulus of vertically built specimens is significantly less then horizontal ones (158.7 GPa versus 198 GPa), as well as yield strength and elongation. A role of residual stress in a deviation of tensile loading diagrams is investigated as a possible explanation. Simulation of the build process on the basis of ABAQUS FEA software was used to predict residual stress in 316L cylindrical specimens. Virtual tensile test results show that residual stress affects the initial stage of the loading curve with a tendency to reduce apparent Young’s modulus, measured according to standard mechanical test methods.

1 January 2020 in Intermetallics
Verified
Journal Article
Closed access
YKYulia Kuzminova
Yulia Kuzminova
DFD. Firsov
D. Firsov
ADA. Dudin
A. Dudin
SSS. Sergeev
S. Sergeev
AZA. Zhilyaev
A. Zhilyaev
SES. Evlashin
S. Evlashin

11 November 2021 in Journal of Materials Engineering and Performance
Verified
Journal Article
Closed access
PDF file
MGMarina O. Gushchina
Marina O. Gushchina
YKYulia Kuzminova
Yulia Kuzminova
EKEgor A. Kudryavtsev
Egor A. Kudryavtsev
KBKonstantin D. Babkin
Konstantin D. Babkin
VAValentina D. Andreeva
Valentina D. Andreeva
EZEvgeniy V. Zemlyakov
Evgeniy V. Zemlyakov

25 January 2023 in Materials
Verified
Journal Article
Open access
PDF file
TCTimur - Chepiga
Timur - Chepiga
PZPetr Zhilyaev
Petr Zhilyaev
ARAlexander Ryabov
Alexander Ryabov
ASAlexey Simonov
Alexey Simonov
ODOleg Dubinin
Oleg Dubinin
Stanislav EvlashinStanislav Evlashin
Stanislav Evlashin
Additive manufacturing is a modern technique to produce parts with a complex geometry. However, the choice of the printing parameters is a time-consuming and costly process. In this study, the parameter optimization for the laser powder bed fusion process was investigated. Using state-of-the art multi-objective Bayesian optimization, the set of the most-promising process parameters (laser power, scanning speed, hatch distance, etc.), which would yield parts with the desired hardness and porosity, was established. The Gaussian process surrogate model was built on 57 empirical data points, and through efficient sampling in the design space, we were able to obtain three points in the Pareto front in just over six iterations. The produced parts had a hardness ranging from 224–235 HV and a porosity in the range of 0.2–0.37%. The trained model recommended using the following parameters for high-quality parts: 58 W, 257 mm/s, 45 µm, with a scan rotation angle of 131 degrees. The proposed methodology greatly reduces the number of experiments, thus saving time and resources. The candidate process parameters prescribed by the model were experimentally validated and tested.

18 November 2014 in Philosophical Magazine
Verified
Journal Article
Closed access
MTMarina Tikhonova
Marina Tikhonova
YKYulia Kuzminova
Yulia Kuzminova
XFXiaoying Fang
Xiaoying Fang
WWWeiguo Wang
Weiguo Wang
RKRustam Kaibyshev
Rustam Kaibyshev
Andrey BelyakovAndrey Belyakov
Andrey Belyakov
The effect of processing and annealing temperatures on the grain boundary characters in the ultrafine-grained structure of a 304-type austenitic stainless steel was studied. An S304H steel was subjected to multidirectional forging (MDF) at 500–800°C to total strains of ~4, followed by annealing at 800–1,000°C for 30 min. The MDF resulted in the formation of ultrafine-grained microstructures with mean grain sizes of 0.28–0.85 μm depending on the processing temperature. The annealing behaviour of the ultrafine-grained steel was characterized by the development of continuous post-dynamic recrystallization including a rapid recovery followed by a gradual grain growth. The post-dynamically recrystallized grain size depended on both the deformation temperature and the annealing temperature. The recrystallization kinetics was reduced with an increase in the temperature of the preceding deformation. The grain growth during post-dynamic recrystallization was accompanied by an increase in the fraction of Σ3n CSL boundaries, which was defined by a relative change in the grain size, i.e. a ratio of the annealed grain size to that evolved by preceding warm working (D/D0). The fraction of Σ3n CSL boundaries sharply rose to approximately 0.5 in the range of D/D0 from 1 to 5, which can be considered as early stage of continuous post-dynamic recrystallization. Then, the rate of increase in the fraction of Σ3n CSL boundaries slowed down significantly in the range of D/D0 > 5. A fivefold increase in the grain size by annealing is a necessary condition to obtain approximately 50% Σ3n CSL boundaries in the recrystallized microstructure.