A dedicated Genetic Algorithm (GA) has been developed to localize the trajectory of ferromagnetic moving objects within a bounded perimeter. Localization of moving ferromagnetic objects is an important tool because it can be employed in situations when the object is obscured. This work is innovative for two main reasons: first, the GA has been tuned to provide an accurate and fast solution to the inverse magnetic field equations problem. Second, the algorithm has been successfully tested using real-life experimental data. Very accurate trajectory localization estimations were obtained over a wide range of scenarios.
A detection and tracking algorithm for ferromagnetic objects based on a two stage Levenberg Marquardt Algorithm (LMA) is presented. The procedure is applied to localization and magnetic moment estimation of ferromagnetic objects moving in the vicinity of an array of two to four 3-axis magnetometers arranged as a check point configuration. The algorithms first stage provides an estimation of the target trajectory and moment that are further refined using a second iteration where only the position vector is taken as unknown. The whole procedure is fast enough to provide satisfactory results within a few seconds after the target has been detected. Tests were conducted in Soreq NRC assessing various check point scenarios and targets. The results obtained from this experiment show good localization performance and good convivial with “noisy” environment. Small targets can be localized with good accuracy using either a vertical “doorway” two to four sensors configuration or ground level two to four sensors configuration. The calculated trajectory was not affected by nearby magnetic interference such as moving vehicles or a combat soldier inspecting the gateway.
In the shallow water regime, several positioning methods for locating underwater magnetometers have been investigated. These studies are based on either computer simulations or downscaled laboratory experiments. The magnetic fields created at the sensors’ locations define an inverse problem in which the sensors’ precise coordinates are the unknown variables. This work addresses the issue through (1) a full-scale experimental setup that provides a thorough scientific perspective as well as real-world system validation and (2) a passive ferromagnetic source with (3) an unknown magnetic vector. The latter increases the numeric solution’s complexity. Eight magnetometers are arranged according to a 2.5 × 2.5 m grid. Six meters above, a ferromagnetic object moves according to a well-defined path and velocity. The magnetic field recorded by the network is then analyzed by two natural computing algorithms: the genetic algorithm (GA) and particle swarm optimizer (PSO). Single- and multi-objective versions are run and compared. All the methods performed very well and were able to determine the location of the sensors within a relative error of 1 to 3%. The absolute error lies between 20 and 35 cm for the close and far sensors, respectively. The multi-objective versions performed better.
Smartphones have become a popular tool for indoor localization and position estimation of users. Existing solutions mainly employ Wi-Fi, RFID, and magnetic sensing techniques to track movements in crowded venues. These are highly sensitive to magnetic clutters and depend on local ambient magnetic fields, which frequently degrades their performance. Also, these techniques often require pre-known mapping surveys of the area, or the presence of active beacons, which are not always available. We embed small-volume and large-moment magnets in pre-known locations and arrange them in specific geometric constellations that create magnetic superstructure patterns of supervised magnetic signatures. These signatures constitute an unambiguous magnetic environment with respect to the moving sensor carrier. The localization algorithm learns the unique patterns of the scattered magnets during training and detects them from the ongoing streaming of data during localization. Our contribution is twofold. First, we deploy passive permanent magnets that do not require a power supply, in contrast to active magnetic transmitters. Second, we perform localization based on smartphone motion rather than on static positioning of the magnetometer. In our previous study, we considered a single superstructure pattern. Here, we present an extended version of that algorithm for multi-superstructure localization, which covers a broader localization area of the user. Experimental results demonstrate localization accuracy of 95% with a mean localization error of less than 1m using artificial intelligence.
4 April 2008 in Propellants, Explosives, Pyrotechnics
The source of the excess magnetic noise caused by discontinuous excitation in a wire core orthogonal fluxgates is described. Discontinuous, or duty cycle, operation allows reducing the inherently high power consumption of orthogonal fluxgates and, therefore, makes possible their employment in mobile equipment. The magnetization process during an excitation cycle is highly nonlinear and inhomogeneous across the wire core. This is because the ac current component of the excitation electrical current causes a skin effect, which is strongly affected by the nonlinearity of the B-H curve. Thus, the magnetization of the domains across the core takes the shape of a spring onion, where each magnetized shell of domains has different level of magnetization, ranging from deep saturation in outer shells to zero magnetization in the innermost ones. Such a domain structure is not stable, especially at the boundary between remnantly magnetized shell and neutral shells. In the idle excitation intervals, there is an occasion for the domains to relax. The domains relaxation is a stochastic process and therefore incurs excess magnetic noise. We investigate the excess noise by measuring the sensitivity and noise in the excitation cycles using a digital selective bandpass sampling processing technique. The attained equivalent magnetic noise is <;2.5 pT/√(Hz) at 1 Hz. We correlate the coupling between the domain shells using the time dependent portion of the Landau-Lifshitz-Gilbert equation. A close relationship between the noise model and experimental data is achieved.