Mirosław Bajda

Dr. Mirosław Bajda

Faculty of Geoengineering, Mining and Geology, Wroclaw University of Science and Technology, Na Grobli 15 St., 50-421 Wrocław, Poland
orcid

Research Focus & Metrics

Academic Career Length

13Years (2014-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
28 September 2021 in Energies
Verified
Journal Article
Open access
PDF file
MBMirosław Bajda
Mirosław Bajda
MHMonika Hardygora
Monika Hardygora
Results of tests into the energy-efficiency of belt conveyor transportation systems indicate that the energy consumption of their drive mechanisms can be limited by lowering the main resistances in the conveyor. The main component of these resistances is represented by belt indentation rolling resistance. Limiting its value will allow a reduction in the amount of energy consumed by the drive mechanisms. This article presents a test rig which enables uncomplicated evaluations of such rolling resistances. It also presents the results of comparative tests performed for five steel-cord conveyor belts. The tests involved a standard belt, a refurbished belt and three energy-saving belts. As temperature significantly influences the values of belt indentation rolling resistance, the tests were performed in both positive and negative temperatures. The results indicate that when compared with the standard belt, the refurbished and the energy-efficient belts generate higher and lower indentation rolling resistances, respectively. In order to demonstrate practical advantages resulting from the use of energy-saving belts, this article also includes calculations of the power demand of a conveyor drive mechanism during one calendar year, as measured on a belt conveyor operated in a mine. The replacement of a standard belt with a refurbished belt generates a power demand higher by 4.8%, and with an energy-efficient belt—lower by 15.3%.

9 March 2021 in Energies
Verified
Journal Article
Open access
PDF file
MBMirosław Bajda
Mirosław Bajda
MHMonika Hardygora
Monika Hardygora
Belt conveyors are used for the transportation of bulk materials in a number of different branches of industry, especially in mining and power industries or in shipping ports. The main component of a belt conveyor is its belt, which serves both as a support for the transported material along the conveyor route and as an element in the drive transmission system. Being crucial to the effective and reliable operation of the conveyor, the belt is also its most expensive and the least durable element. A conveyor belt comprises a core, covers and edges. A multiply textile belt, in which the core is constructed of synthetic fibers such as polyamide, polyester or aramid, is the oldest and still the most commonly used conveyor belt type. The plies are joined with a thin layer of rubber or another material (usually the material is the same as the material used in the covers), which provides the required delamination strength to the belt and allows the plies to move relative to each other as the belt is bent. Belts are installed on the conveyors in a closed loop in order to join belt sections, whose number and length depend on the length and type of the belt conveyor. Belts are joined with each other in a splicing procedure. The cutting of the belt core causes belt splices to be prone to concentrated stresses. The discontinued core also causes the belt to be the weakest element in a conveyor belt loop. The article presents the results of strength parameter tests that were performed on laboratory and industrial splices and indicated the reasons for the reduced strength of conveyor belt splices. Splice strength is reduced mainly due to incorrect preparation of the spliced surfaces and to different mechanical parameters of the spliced belts.

1 August 2018
Verified
Book Chapter
Closed access
PDF file
Leszek Piotr JurdziakLeszek Piotr Jurdziak
Leszek Piotr Jurdziak
RBRyszard Błażej
Ryszard Błażej
MBMirosław Bajda
Mirosław Bajda

22 April 2022 in Energies
Verified
Journal Article
Open access
PDF file
MBMirosław Bajda
Mirosław Bajda
MHMonika Hardygora
Monika Hardygora
DMDaniela Marasová
Daniela Marasová
Belt conveyors are presently the most common transportation machines used in surface and underground mining

16 October 2022 in Energies
Verified
Journal Article
Open access
PDF file
RBRyszard Błażej
Ryszard Błażej
Leszek Piotr JurdziakLeszek Piotr Jurdziak
Leszek Piotr Jurdziak
AKAgata Kirjanów-Błażej
Agata Kirjanów-Błażej
MBMirosław Bajda
Mirosław Bajda
DODominika Olchówka
Dominika Olchówka
Aleksandra RzeszowskaAleksandra Rzeszowska
Aleksandra Rzeszowska
The authors propose a new method of predictive replacements of belt sections in a conveyor belt loop with their refurbishment based on their condition recognized by specially designed diagnostic devices: DiagBelt and BeltSonic. Selection of the moment for belt replacement is made on the basis of forecasted state of its wear, when steel cable failure density exceeds the selected threshold or the percentage of belt covers abrasion exceeds the permissible level. The use of double belt refurbishment extends the total belt operation time, but without diagnostics, the reconditioning success rate is relatively low. Visual inspection allows only an uncertain assessment of cable condition. New devices give precise assessment of their condition and allow the selection of a non-linear rate of belt condition based on consecutive scans. The assessed condition of the cables is the key factor in successful belt refurbishment and obtained cost savings. Additionally, diagnostics can help extend belt life. Identified failures can be repaired in order to prevent accelerated belt degradation. The use of diagnostics in the current replacement strategy significantly improves the economic efficiency of belt reconditioning. The reuse of the belt core ensures efficient use of resources and reduces the level of waste, which fits into the circular economy.

26 April 2019 in IOP Conference Series: Earth and Environmental Science
Verified
Conference Paper
Open access
PDF file
MBMirosław Bajda
Mirosław Bajda
MHMonika Hardygora
Monika Hardygora