High quality long-term data sets of altitude-resolved measurements of the atmospheric composition are important because they can be used both to study the evolution of the atmosphere and as a benchmark for future missions. For the final ESA reprocessing of MIPAS (Michelson Interferometer for Passive Atmospheric Sounding) on ENVISAT (ENViromental SATellite) data, numerous improvements were implemented in the Level 2 (L2) processor Optimised Retrieval Model (ORM) version 8.22 (V8) and its auxiliary data. The implemented changes involve all aspects of the processing chain, from the modelling of the measurements with the handling of the horizontal inhomogeneities along the line of sight to the use of the optimal estimation technique to retrieve the minor species, from a more sensitive approach to detecting the spectra affected by clouds to a refined method for identifying low quality products. Improvements in the modelling of the measurements were also obtained with an update of the used spectroscopic data and of the databases providing the a priori knowledge of the atmosphere. The HITRAN_mipas_pf4.45 spectroscopic database was finalised with new spectroscopic data verified with MIPAS measurements themselves, while recently measured cross-sections were used for the heavy molecules. The Level 2 Initial Guess (IG2) data set, containing the climatology used by the MIPAS L2 processor to generate the initial guess and interfering species profiles when the retrieved profiles from previous scans are not available, was improved taking into account the diurnal variation of the profiles defined using climatologies from both measurements and models. Horizontal gradients were generated using the ECMWF ERA-Interim data closest in time and space to the MIPAS data. Further improvements in the L2 V8 products derived from the use of the L1b V8 products, which were upgraded to reduce the instrumental temporal drift and to handle the abrupt changes in the calibration gain. The improvements introduced into the ORM V8 L2 processor and its upgraded auxiliary data, together with the use of the L1b V8 products, lead to the generation of the MIPAS L2 V8 products, which are characterised by an increased accuracy, better temporal stability and a greater number of retrieved species.

With the launch of the Sentinel-5 Precursor (S-5P, lifted-off on 13 October 2017), Sentinel-4 (S-4) and Sentinel-5 (S-5)(from 2021 and 2023 onwards, respectively) operational missions of the ESA/EU Copernicus program, a massive amount of atmospheric composition data with unprecedented quality will become available from geostationary (GEO) and low Earth orbit (LEO) observations. Enhanced observational capabilities are expected to foster deeper insight than ever before on key issues relevant for air quality, stratospheric ozone, solar radiation, and climate. A major potential strength of the Sentinel observations lies in the exploitation of complementary information that originates from simultaneous and independent satellite measurements of the same air mass. The core purpose of the AURORA (Advanced Ultraviolet Radiation and Ozone Retrieval for Applications) project is to investigate this exploitation from a novel approach for merging data acquired in different spectral regions from on board the GEO and LEO platforms. A data processing chain is implemented and tested on synthetic observations. A new data algorithm combines the ultraviolet, visible and thermal infrared ozone products into S-4 and S-5(P) fused profiles. These fused products are then ingested into state-of-the-art data assimilation systems to obtain a unique ozone profile in analyses and forecasts mode. A comparative evaluation and validation of fused products assimilation versus the assimilation of the operational products will seek to demonstrate the improvements achieved by the proposed approach. This contribution provides a first general overview of the project, and discusses both the challenges of developing a technological infrastructure for implementing the AURORA concept, and the potential for applications of AURORA derived products, such as tropospheric ozone and UV surface radiation, in sectors such as air quality monitoring and health.

Snow extent and water equivalent (SWE) on land and snow accumulation on glaciers are the main parameters to be delivered by the Cold Regions Hydrology High-resolution Observatory (CoReH₂O) satellite. Detailed scientific and technical studies for the mission are going on within the Earth Explorer Programme of ESA. The CoReH₂O sensor is a dual frequency SAR, operating at 17.2 and 9.6 GHz, VV and VH polarizations. A main task for mission preparation is the development and validation of algorithms for retrieval of snow parameters. A constrained minimization approach is proposed for SWE retrieval, matching backscatter computed with a radiative transfer model and measurements in the four SAR channels by iterating for SWE and snow grain size. The algorithm was validated with simulated and measured backscatter data. The tests confirm the feasibility of the retrieval approach and help to quantify the requirements for statistical background information which is needed for constraining the solution.

In 2019 the Far-Infrared Outgoing Radiation Understanding and Monitoring (FORUM) mission was selected to be the 9th Earth Explorer mission of the European Space Agency (ESA). In the preparatory phase of the mission there was the need for accurate and versatile codes to compute the spectrally resolved Earth radiation escaping to space ( outgoing long-wave radiation, OLR), targets for the FORUM measurements.Moreover, for the study of planetary atmospheres, several instruments measuring the planetary radiation escaping to space have been deployed (i.e., the planetary Fourier spectrometer on Mars express or composite infrared spectrometer on Cassini). For both the analysis of the measurements of these instruments and the design of new instruments, reliable radiative transfer codes need to be available. In this paper, we describe two full physics codes, Geofit broadband-Nadir (GBB-Nadir) and Kyoto protocol-informed management of adaptation (KLIMA), both able to compute the OLR spectrum, while GBB-Nadir is only a forward model, and therefore computes the spectra only, KLIMA implements the computation of spectral radiance derivatives with respect to atmospheric parameters and therefore it is suitable to be used in retrieval codes. The GBB-Nadir code can be interfaced with radiative transfer solvers that include representations of multiple scatterings, making it suitable to compute the radiances in all-sky conditions. KLIMA has been extensively validated comparing its radiances to ones generated by the widely used line-by-line radiative transfer model (LBLRTM) code. In this paper, we describe the latest version of both codes and their comparison. We compared the optical depth computed by GBB-Nadir and KLIMA for given values of pressure, temperature and gas columns for most gases active in the far-infrared and thermal-infrared spectral regions. We show that the optical depths computed by the two codes are in very good agreement. We compared the simulated spectra in clear sky conditions for three different atmospheres (equatorial, mid-latitude and polar) at resolutions of the FORUM instrument. The differences found are well below the expected noise of the FORUM instrument. The KLIMA code has already been used to simulate the observations of the Mars atmosphere, while the limb version of the GBB code has been used to simulate the radiances measured in the limb geometry of planetary atmospheres (Titan and Jupiter). Therefore, we may safely affirm that both codes can be used to simulate the nadir measurements of planetary atmospheres.

AURORA (Advanced Ultraviolet Radiation and Ozone Retrieval for Applications) is a three-year project supported by the European Union in the frame of its H2020 Call (EO-2-2015) for “Stimulating wider research use of Copernicus Sentinel Data”. The project addresses key scientific issues relevant for synergistic exploitation of data acquired in different spectral ranges by different instruments on board the atmospheric Sentinels. A novel approach, based on the assimilation of geosynchronous equatorial orbit (GEO) and low Earth orbit (LEO) fused products by application of an innovative algorithm to Sentinel-4 (S-4) and Sentinel-5 (S-5) synthetic data, is adopted to assess the quality of the unique ozone vertical profile obtained in a context simulating the operational environment. The first priority is then attributed to the lower atmosphere with calculation of tropospheric columns and ultraviolet (UV) surface radiation from the resulting ozone vertical distribution. Here we provide details on the surface UV algorithm of AURORA. Both UV index (UVI) and UV-A irradiance are provided from synthetic satellite measurements, which in turn are based on atmospheric scenarios from MERRA-2 (Modern-Era Retrospective analysis for Research and Applications, Version 2) re-analysis. The UV algorithm is implemented in a software tool integrated in the technological infrastructure developed in the context of AURORA for the management of the synthetic data and for supporting the data processing. This was closely linked to the application-oriented activities of the project, aimed to improve the performance and functionality of a downstream application for personal UV dosimetry based on satellite data. The use of synthetic measurements from MERRA-2 gives us also a “ground truth”, against which to evaluate the performance of our UV model with varying inputs. In this study we both describe the UV algorithm itself and assess the influence that changes in ozone profiles, due to the fusion and assimilation, can cause in surface UV levels.

High quality long-term data sets of altitude-resolved measurements of the atmospheric composition are important because they can be used both to study the evolution of the atmosphere and as a benchmark for future missions. For the final ESA reprocessing of MIPAS (Michelson Interferometer for Passive Atmospheric Sounding) on ENVISAT (ENViromental SATellite) data, numerous improvements were implemented in the level 2 (L2) processor Optimised Retrieval Model (ORM) version 8.22 (V8) and its auxiliary data. The implemented changes involve all aspects of the processing chain, from the modelling of the measurements with the handling of the horizontal inhomogeneities along the line of sight to the use of the Optimal Estimation for retrieving the minor species, from a more sensitive approach to detect the spectra affected by clouds to a refined method for identifying low quality products. Improvements in the modelling of the measurements were obtained also with an update of the used spectroscopic data and of the databases providing the a priori knowledge of the atmosphere. The HITRAN_mipas_pf4.45 spectroscopic database was finalised with new spectroscopic data verified with MIPAS measurements themselves, while recently measured cross-sections were used for the heavy molecules. The so-called IG2 data set, containing the climatology used by MIPAS L2 processor to generate the initial guess and interfering species profiles when the retrieved profiles from previous scans are not available, was improved taking into account the diurnal variation of the profiles defined using climatologies from both measurements and models. Horizontal gradients were generated using ECMWF ERA-Interim data closest in time and space to the MIPAS data. Further improvements in the L2 V8 products derived from the use of the L1b V8 products, which were upgraded to reduce the instrumental temporal drift and to handle the abrupt changes in the calibration gain. The improvements introduced into the ORM V8 L2 processor and its upgraded auxiliary data, together with the use of the L1b V8 products, lead to the generation of the MIPAS L2 V8 products that are characterised by an increased accuracy, better temporal stability, and a greater number of retrieved species.