Bone sawing is widely used in orthognathic surgery to correct maxillary deformities. Successful execution of bone sawing requires a high level of dexterity and experience. A virtual reality (VR) surgical simulator can provide a safe, cost-effective, and repeatable training method. In this study, we developed a VR training simulator with haptic functions to simulate bone-sawing force, which was generated by the experimental force model. Ten human skulls were obtained in this study for the determination of surgical bone-sawing force. Using a 5-DOF machining center and a micro-reciprocating saw, bone specimens with different bone density were sawed at different feed rates (20, 40, and 60 mm/min) and spindle speeds (9800, 11,200 and 12,600 cycles per minute). The sawing forces were recorded with a piezoelectric dynamometer and a signal acquisition system. Linear correlation analysis of all experimental data indicates that there were significant positive linear correlations between bone-sawing force and bone density and tool feed rate and a moderate negative linear correlation with tool spindle rate. By performing multiple regression analysis, the prediction models for the bone-sawing procedure were determined. By employing Omega.6 as a haptic device, a medical simulator for the Lefort I osteotomy was developed based on an experimental force model. Comparison of the force-time curve acquired through experiments and the curve computed from the simulator indicate that the obtained forces based on the experimental force model and the acquired data had the same trend for the bone-sawing procedure of orthognathic surgery.
3 May 2021 in International Journal of Computer Assisted Radiology and Surgery
Surgical robotic technology is characterized by its high accuracy, good stability, and repeatability. The accuracy of mandibular osteotomy is important in tumor resection, function reconstruction, and abnormality correction. This study is designed to compare the operative accuracy between robot-assisted osteotomy and surgical guide technique in the skull model trials which simulated the genioplasty. In an experimental group, robot-assisted chin osteotomy was automatically performed in 12 models of 12 patients according to the preoperative virtual surgical planning (VSP). In a control group, with the assistance of a surgical guide, a surgeon performed the chin osteotomy in another 12 models of the same patients. All the mandibular osteotomies were successfully completed, and then the distance error and direction error of the osteotomy plane were measured and analyzed. The overall distance errors of the osteotomy plane were 1.57 ± 0.26 mm in the experimental group and 1.55 ± 0.23 mm in the control group, and the direction errors were 7.99 ± 1.10° in the experimental group and 8.61 ± 1.05° in the control group. The Bland–Altman analysis results revealed that the distance error of 91.7% (11/12) and the direction error of 100% (12/12) of the osteotomy plane were within the 95% limits of agreement, suggesting the consistency of differences in the osteotomy planes between the two groups. Robot-assisted chin osteotomy is a feasible auxiliary technology and achieves the accuracy level of surgical guide-assisted manual operation.